Hoàn Thiện Phục Hồi Mâm Quay Toa Máy Xúc Sau 1 Năm Sử Dụng Cho E Phong Tại Lạng Sơn

Xuan Manh Excavator
86 followers
Hoàn Thiện Phục Hồi Mâm Quay Toa Máy Xúc Sau 1 Năm Sử Dụng Cho E Phong Tại Lạng Sơn
Xem thêm :
#XuanManhVlogs #mamquaytoa #jcbvideo
--------------------------------
© Bản quyền thuộc về Xuân Mạnh Vlogs
© Copyright by Xuân Mạnh Vlogs ☞ Do not Reup
will also get used to it and you can see
this panoramic view up here, so let's
share and share which yard to buy. One year
has been ruined so that you guys still
don't know how to buy and sell, let's go buy it, brother
[ music] Well,
hello everyone.
Manh is currently in Kien Moc commune, Dinh Lap district,
Lang Son province. Today,
our brothers are here to continue to handle
a broken butt for me. Dosan dx55
2000,
after overcoming poor roads, going through bumps and
difficult roads,
our brothers and I have also reached
this machine and this is the condition of
this machine. Oh my god, oh my god.
oh my god, the sprouts are raised like this but the
owner says no. Oh my god nodding nodding the
whole bunch like this oh my god what a
barbaric scene nodding like
this but the owner says it is This one is not
dirty. We went to Kien
Moc early in the morning and
you can pay attention to the weather in Kien Moc at this time. Look at this.
These clouds and clouds intertwine with the
high mountains to create a picture. It's great
for Kien
Moc. You guys have a beautiful view. There's no road. It's
very difficult to go. We almost
got stuck in that stream.
Now, as usual, I'll
start filming to check. And before
going into the video, I invite you to take a look at the
aerial view of Kien Moc Dinh
Lap Lang Son commune to see if the scenery here is
interesting and beautiful, and here
Manh is currently at his uncle's house.
Our boss's house is located in Kien Moc commune, a
rural area in the Northern region of Dinh Lap district,
Lang Son province, Kien Moc commune, with an
area of
157.5 km2. The population in 1999 was
2,241 people and the population density reached 14 people
per km2. Hey guys, and
looking at our boss's house from above, you
can see that it is located in the middle of a
mountainside with a very beautiful view.
If you lived in this area, you would
definitely You probably won't get used to it because
you're from the city, but if you've been here
for a long time, you'll get used to it and you can
see the whole scene up here.
Here and there at the boss's house, there's a dosan,
this one is
This is a 2nd generation 2012 model. I saw the owner say that he just
bought it somewhere about a year ago.
Previously, I bought it and after
using it for a while, the machine was
malfunctioning. So he
called us to come up and these
are the houses in Kien Moc commune.
These are very simple houses.
Even though they are simple, the
human love here is very great. negative pressure guys.
That's why sometimes there are places that don't
need money but just love.
If I give you a gift, will
you stay here or not?
Let's see more. Let's
go farther so you can
see the mountains and clouds and see the
beauty of this Kien Moc commune
. Every time I go up here,
I really like the scenery here.
When I come here, it's almost like I don't want to go back. It's
very beautiful, guys. It's a
very small machine in the middle of this mountain and forest. Let's
admire more of the beauty of
Kien Moc here and there. Let's go further.
This mountain range is full of mountains and mountains,
here and there, only to see the
beauty of Kien
Moc. After a few minutes of admiring the scenery at high
altitude, we now
return to work. Guys,
all the screws on the outer rim have been
removed. Now this will be the step to prop the machine
up so that this part of the rim can be lifted
out. Currently, the
main thing here is to pick up the wood and When opening
this road, I'm using my dominant hand to
work and these are the small houses
of the machine owner. There are a
lot of us repairing them. The members
are sitting here watching and looking
at the
weather. The beautiful sunshine is very suitable for
work and this is a
dosan dx55 rotary wheel. Oh, these dozens of wheels are
all worn and shiny. The
inside of the wheel is full of hydraulic oil. Do you
see? The tray is full of hydraulic oil.
Look at my crankshaft.
It's worn out. It's almost like shaving, but it's
not too worn. Is it
full of hydraulic oil
? Is the hydraulic oil coming out like that? Just
apply it and it will flow in. In that ball, it
causes the ball in this tray to
not be lubricated with grease, so
it will have a rhythmic pattern. The
teeth of the other tray are bright. The other teeth
must have a lot of them.
The oil is
basically the oil, the Thu
Luc oil will be washed down, then it will be washed
again, because the oil will be shiny, then it
will be washed again, then the oil will come
down, it will wash off all the grease, it will
wear out quickly, you're right. Normally, if
normal oil would lubricate with
beef fat, now that there is no beef fat anymore,
it will be washed away and it won't wear out as
quickly because the oil has downward pressure, but if there
is no oil that has downward force, it will It's
different from eating oil, so the oil is lumpy, so it's
not worn out. I looked at the shaft on the other side and it looks
a lot worn, but I took a photo.
V said my tray isn't very dirty yet.
My tray is about to fall, but it's not dirty yet.
Did I hear you wrong? Please come and
fix the dirty tray for me, but I forgot to
mention that my tray is sharp.
Replace this one,
I'm sorry. That crankshaft is a bit
worn, so I can replace it or not.
How much does it cost to replace this
? Now if I buy it,
I have to buy it outside Lang Son or Dinh
Lap and send it here.
See, you don't need to start the engine, can
you see the hydraulic oil flowing down?
See? See here, the
shaft is flowing. That means you don't need to
start the engine, it's already flowing like that. Now
when you start the engine to work, it's still flowing
badly. It's all because of this tray,
it's holding it up. If you press it down, it's stuck
to the shaft and it's leaking oil
here and there. Don't stand here and look at it still
leaking like it's cutting into pieces like that. Why does the
machine still leak a lot when it's spinning under load? That's
why every week. How many
cans of this brooch? How many cans have I had since I bought it?
6 since I bought it 4 C 45
cans This one has been in the yard for 1 year, right?
This one just had its fifth birthday
and has already made a tray. It's okay for one year's birthday.
Get me a bag. I'll clean up the fat.
I see that furry bag. Yes, a furry bag
or whatever bag is fine. Let me remove
that stuffy stuff so it's clean. I'm
so scared.
This is it. The hydraulic oil is down, so it
dissolves this grease, so the grease is
no longer effective as a lubricant. Hey, okay,
that's okay, then
add another bag, uh, get another bag,
yeah, this grease. There's a lot of sand
but there's no grease,
but here, this is this one that's both lubricated
with hydraulic oil and lubricated with grease,
but also lubricated with sand.
The fat is beautiful. It's beautiful mixed with sand. This is
all grease. There's no sand,
this one is lubricated with three
things, including sand in there. Fish are full of sand. C like
me here, like here, I can't see it, but
I don't want to say anything. Why can't I put sand in there? Or
maybe you put sand in there?
That Korean sand must be Korean sand
Yes Korean sand right here
Korean sand Korean [ __ ]
This sand is
so fishy, it's so beautiful and
cool Why did I buy this a few years ago? It's
just been a year, you've just learned it. A year of
studying, right? Yes, it's just a year of
learning. Let's share, share which yard to buy.
One year has passed so you guys still do
n't know what to buy. Sell it, uncle. Just go
buy it, bro. You go buy it, order it and then
get it back. That means it's only
been 1 year now, right? Yes, the
machine is only a year old. I
bought it from the dump. Just a year later, you'll lose the tray.
I've lost the crankshaft
and
this one, the
mt version has both hydraulic legs and
uses
Korean sand pliers, right? Yes,
Kien Moc doesn't have this sand. I'll take some
to use. Dung. If not, it's yours. It's
yours, but I don't. That
means I would have taken it back down there, but I'm
afraid that when I take it on the way home, it will fly away
[music].
And this is a turntable that was
restored by our brothers. I'm done.
Now, guys, we will install
this recovery wheel part for
this dx25. In addition to making the wheel, we
also have to replace the seal of the
other crankshaft, but this part
is Our brothers are handling the installation of the front wheel
and the part of replacing the turning seal will be
completed. The weather is currently
sunny here in the back this is the
owner's house. The owner is in the
process of cooking rice to invite. All of us brothers
are in the hills around here.
Whoever does it, whoever
fixes the machine, just fixes it. The boss is cooking
to take care of you guys.
This is so
vast, so vast
[music] ]
Always here is a glitter tray with peach branches.
Here, this
one specializes in
wood. This is a
wooden fruit. This one has four
pins. Four pins are installed according to its original.
This one is the MT version, so it is available.
These four pipes 1 2 3 4 are attached to that
wooden corn clamp, this one uses a
hydraulic pedal
above with two pedals above to
start catching the inner balls
and now we guys will
Proceed to lower the machine so that the teeth
of the spindle align with the rim of the tray. The
audience is getting bigger and
bigger.
There are a lot of people around here. Come to
see the
swing and adjust it a little
bit, dear audience. Just come and
go, just come and go, just come and
go, just a little
more, a
little more, a little
more It's
like that, the U latch part is already in,
now the only thing to do is to screw the
outer rim and that's it. There are a
lot of people around the village
here, only to see how united they are.
How is it? Now we turn and screw in this screw
and thus a rotating wheel has been
restored and
completely installed by our brothers for this dosan dx55.
Now you can pay attention to
it. Here is one of my trays,
it's so smooth. Now the tray is no longer
dirty. Now besides the problem
of trying it out for the owner, turn left, turn
right, turn back, turn BC like this to
see if this one still complains. Or is it dirty?
[Music] is
n't it so quiet? R and Ngo, boss,
we're still washing the dishes in
there. It's so quiet.
[Music] is
like that, so we brothers
Having completed the installation
and restoration of the turntable motor
for this Dosan
Hey guys. Please join us
in part two. Anyone who
needs to restore the turntable, replace it,
install a new turntable, can contact my
9-year-old brother. Thank you for
watching the
video.
