How To Solder Stained Glass youtube.com/playlist?list=PLKBaFDgqVHzbqa2Ht5iUA8_05JacoO8vG How to Cut Stained Glass youtube.com/playlist?list=PLKBaFDgqVHzazX7fBo0_HlfyzXiHyu2J6 How to Grind + Foil Glass youtube.com/playlist?list=PLKBaFDgqVHzYYVr7y0IFqn2uormrerxrq Livestreams + Viewer Showcases youtube.com/playlist?list=PLKBaFDgqVHzZvTVZmc9ziJYwxYisc00rs ARTyRV Fan Club youtube.com/channel/UCa2jJSRa-audP221EL24SCw/join All Stained Glass Info Here conwayglass.com/links-page Stained Glass Tools conwayglass.com/shop-supplies ARTyRV AMAZON Store amazon.com/shop/artyrvglassstudio ARTyRV Facebook facebook.com/ArtyRVShow Conway Glass Facebook facebook.com/ConwayGlassCenter Breaking Glass News conwayglass.com/blog/2023/8/7/welcome-antique-collectors-restoration-enthusiasts-and-stained-glass-artists Miss Mary Stickers + Merch artyrv.myspreadshop.com ARTyRV TikTok tiktok.com/@artyrvglass?lang=en Streeter Glass Instagram instagram.com/streeter_glass
[Applause]
[Music]
yeah so the wood that we're using to
frame our stained glass windows in and
we've been using it for years is a white
oak it's been finished it is an inch and
3/8 wide and it has a 516
Groove down the center which is going to
help you whether you're using zinc to
frame your little your windows in or if
you're using Le you know leaning
windows in Windows really doesn't work
because what happens is it starts to do
this eventually and you know you can
only turn them so many times before they
finally just fold up and collap so you
don't want to do that if you'll put your
your work into frames and either hang it
or then you can lean it without you know
the sides wanting to Bend or anything
like that because you never know what
hinge joint might fail on you and uh I
try to frame windows in that not only
that we make but when they come in for a
repair and this is what we're doing
today we're showing you we've got three
frames to build for three repairs and
you know what we're going to get started
here and show you how we do this so
we've got our miter saw set up you don't
need a big miter saw like that this is
just one that I happen to get ready I'm
putting it on the truck later on today
to go put shower door so I've cleaned my
work surface off so the first frame we
need is 14 1/2 to the Long Point on the
top and bottom and it just so happens
that I had a piece left over from a
previous job that we'll be able don't
waste any of this don't put throw any of
this wood away so here we go we're going
to start out by putting the miter on
that we need first so remember we took
our measurements to the Long Point which
is this point right
here
[Music]
[Music]
so remember to start another piece you
just turn the wood over you don't have
to flip it around or anything turn it
[Music]
over
and that
changes your
miter so that now you'll have
this okay we'll show you how to put this
all together in just a few minutes hey
everybody so we've got all of our wood
cut for these three frames so I'm going
to show you one of them is right here
now this is what happens I'm going to
show this to you horizontally because
this is what happens when it leans in
the window see that see that fold right
there
this is what happens when you just lean
them in the window like this so we're
going to fix this we're going to put it
in a frame for the customer so let me
show
you now on our Amazon shopping page
you're going to find these little miter
boxes so this is going to we're going to
show you this kind of you know make sure
that
nothing can happen
except the fact that it's going to be um
really and we just take that and we
tighten it
up now I want to I want y'all to keep in
mind when you're hanging a
window the screws need to go the
opposite way that the hangers are so
this window is going to hang like
this up and down
so what we want to do we're going to
take our we're going to take our e inch
drill
bit and we're going to drill a
hole
approximately a/ in
back
okay
and now we're going to want to
use we're going to use a counter syn and
I just happen to have this
one right
here okay so we want to counter sync
that hole and make it look
nice and then I'm using a number six
we'll set that right there so you can
see it it's a number
six screw
okay now the one thing that we want to
do right here is we're going to put a
little bit of glue on
it so we're going to put a little bit of
glue and a little bit of glue and you
know remember when you're working with
this
glue you know uh if you get any that
oozes out you just take a damp
cloth you just take a damp cloth and you
set that right in there like
that and there's our
miter so now we have just a really
nice clean look on
that and then we'll do the other
end like
so and you can do this all at uh all at
one time but I prefer to drill the ho
first and then take it back
apart
[Music]
for a few extra dollars you can frame
your work for your customer and you
don't never have to worry about it
falling and definitely you don't have to
worry about it coming
apart I'm Ed for the Conway glass
Studios and the Rd RV Channel don't
forget if you have a moment and haven't
subscrib to our Channel yet please do so
give us a thumbs up if you like this
video because all of those things help
our Channel grow and we appreciate
everything that you guys do for us
[Music]
thank
[Music]
okay it's
okay it's just noisy back
[Music]
here
okay I'm G to share this right now
[Music]
because
[Music]
yeah