On this episode of DTB’s “Gear Masters”, Erik Arnesen, guitarist for the folk rock band, Great Lake Swimmers, shows off the gear that he uses onstage, while on tour with Native Harrow. Great Lake Swimmers is currently supporting their newest album, The Waves, The Wake.
Information about this video: Film Date - October 20, 2018 Location - Schubas Tavern in Chicago, IL
About Digital Tour Bus: This is the official YouTube channel for Digital Tour Bus. If you like what you see, make sure you visit http://digitaltourbus.com for exclusive features and contests. We release two brand new videos every single day at 12pm and 4pm (CST). Regardless of the genres of music you enjoy, we've got you covered! We cover artists from every music genre that you can think of, so make sure you subscribe to be the first to see all of our new videos.
[Applause]
okay my name is Eric artisan I play
guitar and banjo in Great Lakes swimmers
let's talk gear this is a Gretsch double
anniversary model it's a reissue I
believe it's Japanese made I bought it
five years ago maybe a little more but
it's a total to spec replica of a 65
Gretsch double anniversary
it's got high-low tron pickups they're
kind of a sharper I guess they would be
more like the p90 version of the on the
pickup spectrum a bit sharper rash here
cool fur is surf sound dialing in a surf
sent more the other pickups call they
have the make out the ones that were the
humbucking ones not the high-low drones
filter trans they are not filter drums
and I kind of wish that I could swap one
of them out psychic I get the variety I
have yet to do that and also this bridge
which comes stock with it which is a
roller bridge which really only allows
you to vary the space in between the
strings but doesn't actually allow you
to adjust the intonation at this level
which would be kind of helpful and I'm
thinking about swapping that out too but
I'll get to it because I'm a musician on
the road so I don't have the money to do
that
I will typically use both of them unless
it's obviously something that needs to
punch through and switch to the bridge
pickup and this is a strange arrangement
that they've created here whereby this
seemingly you would think would do
something special but it basically by
flipping it up negates everything and
focuses all the action on the neck
pickup it's kind of a bizarre feature I
guess maybe in a pinch if you were here
I couldn't do that decided you had to
move an inch and a half to the right
that was there for you
obviously master volume which I keep it
about three quarters so that if I need
to get louder for a lead or do something
then I can bring that in and obviously
push the pickups a little bit more and
these I kind of keep them cranked all
the time maybe I use them off a little
bit but generally because I'm using the
pick ups I kind of want the full-bore
here right here yeah there's only a
couple of songs I generally because it
gets really bitey when you go down to
the bridge pickup but obviously perfect
for cutting through and a specific kind
of sound which I found on a few songs
really works in conjunction with the
nice slapback echo gives you a pretty
authentic cool 50s deal I want to say
that I'm using the Gibson strings then
there's a specific name for them that I
can't quite recall I'm sorry and usually
a medium gauge because I don't do a ton
of bending and I play a lot of acoustic
guitar so I'm used to practicing a lot
of practicing flat picking I'm not
fabulous at it but I found that it's it
makes my acoustic sound great and now
I'm just used to the feel medium strings
I'm not a big bender so they last for a
while and they give me a good tone so
that's why I choose those usually these
the Dunlop's the 0.88 because i don't
really like them to be very floppy but
not super rigid at the same time so
perfect in the middle choice always the
Dunlop's I like the grip I like the
utility utilitarian look straight up
gray banjo is actually a it's made in
Guelph Ontario it's made by a man named
and you can see it in there Ian
Patterson so he built it in 2006
he's like a cabinet maker and luthier
and I saw his banjos at a store in
Toronto called the 12th fret they were
consigning his stuff when I thought it
was a beautiful open back replica of
a twice the price Gibson model and it
sounded just as good to me so I reached
out to him and he was a super nice guy
and we chatted about it and he agreed to
build me a banjo for a very reasonable
price and not only that but allow me
into the process like he we talked about
it as he was doing it he would send me
pictures as he was turning the rim and
it was just kind of like a nice personal
touch to be able to talk to somebody as
it's happening as opposed to just taking
the finished product off the shelf and
playing and it's like I got to be a part
of that whole thing which is really
great and I mean you can't beat
providing work to local builders it's
kind of a win-win for everybody
and this is the 16th one that he made so
he was relatively new I think he still
builds them now and this is more than 10
years ago so I imagine he's probably
gotten quite good at it not that there's
anything wrong with this one is
beautiful he put like a maple cap on the
back of the rim I have it set up with a
knk pickup I've used a bunch of pickups
and I found that this one was actually
the best for me because we're not a band
that is going to necessarily like the
banjo on stage now because I'm moving
around a lot it's just because there's
so much other stuff going on and to be
able to get a clean clear signal for the
sound engineer every time was ideal is
what I wanted plus I like to run it
through some pedals to give it a bit of
reverb and be able to control that
reverb so this one I found is the best
one
it doesn't actually sit under the bridge
like a lot of them do it straddles the
bridge on either side and I found with
the other ones that did sit under the
bridge it would actually kind of mute
the bridge sometimes which when playing
acoustically is a pretty undesirable
thing unless you're trying to adjust the
tone and/or play quieter that's not to
be able to control that dynamic not not
a
think for me I didn't like it very much
so this was great and I've been using
KNK pickup for eight years or so and I
think their company from Portland Oregon
could totally be wrong about that but I
think from what I remember yeah I mean
it's a pretty just standard open back
clawhammer banjo I didn't want a lot of
frills on it I didn't think that was
very necessary and if you are buying a
banjo and just getting into it thinking
about taking up I cannot stress the
importance of getting the geared fifth
string tuner as I've seen a lot of them
you know if you're thinking I'll spend
less money just to get an entry-level
banjo I've seen a lot of them that use
the friction tuners where you're just
relying on the tension of the string to
hold to big mistake I mean it goes out
all the time and if you are just
learning there can be nothing more
frustrating and having the head of tune
instrument the whole time pretty
discouraging so if you buy one you can
even just mod it and put one of those in
it's pretty inexpensive I think you can
buy them for like 50 bucks get someone
to install it but that's pretty key and
then in Vancouver I feel like we were on
tour somewhere and there was time to do
it so I had these installed they're
actually little railway spikes from toy
train sets that they hammer in to the
neck you can see where they kind of they
didn't get it right the first time and
put the one in below here pretty
inexpensive to do and it saves you from
having to have one of these gross
sliding Capo's that you can get
installed on banjos specifically just
for the fifth string but it's like a
whole other mechanism that sits on top
here and if you're trying to do finger
work here it can be pretty it can be an
impeachment so I wouldn't recommend that
this is probably half the price and
super effective if I'm in G which I am I
talk to you
here and all of a sudden I'm in a all of
a sudden I'm in C and it's quick too if
you if that's the song requires that
it's very fast and that's pretty much
all I've done to it in terms of modding
the banjo
not a lot sometimes if I'm recording
stick a towel in the back the classic
get rid of all the overtones
but yeah pretty simple I just plug it in
here and I run it through the pedals to
the amp and I will generally just
because I want to be able to switch back
between guitar and banjo pretty quickly
the only thing I'll do is run would be
running the whole thing through a DI and
switch the amp off because if the amp if
the banjo is here obviously open with an
amp is there feedback is imminent so
they'll just get the DI signal at that
point which because the pickup is pretty
good it's kind of it's you know not a
perfect acoustic banjo sound but the
compromise I can totally relate to live
with it's good enough good enough for
country into the Ernie Ball volume pedal
which I had the older model and he uses
the string and wheel and the the pot
which I mean this one does too but on
this guy in here they use this Kevlar
not a string anymore they use this bit
of Kevlar which apparently I mean they
sold me if they just said it's stronger
and less likely to break which if you've
ever had one of these break you know
what a pain in the ass it is to repair
it so that's what attracted me to this
one and you know a standard boss
can you three I think I've used that
forever
I've never really see how did any other
reason that switch it up this is an
interesting pedal and I've you I got
this five years ago and it is set here
in the chain and never left
it's basically a copy of a Kwan Center
but not like it's a little bit moderate
I guess they got the circuit and just
switched it up a little bit but
essentially want a nice transparent
overdrive that was close enough to a
clown scent or that had that same bite
but in a box that is about a fifth of
the size of a clown Center and a fifth
of the price too and it's beautiful it's
perfect it's perfect overdrive I've
never used anything else I was at one
point using this guy dizzy Beck's super
hard on just more like a boost
I forget how they they talked about this
is like the same as a channel strip on a
board I can't remember exactly what it
is but I used to use this and it was
great but on this guy came along that
kind of now just use this if I feel like
I need to get more juice at the end of
the chain which I don't I've gotten rid
of a bunch of pedals so you don't really
anymore overdrive into the El Cap the
Strymon which is amazing amazing tape
delay pedal with all kinds of cool
features everyone probably knows about
the horrible the flutter of the tape age
and it can do everything I think it even
has and I have yet to explore it like a
looping function but yeah we'll get
there at some point and I was so
impressed with this guy that I went and
got this because my app does not have
reverb I wanted something that was close
close to a authentic spring reverb as
possible and this guy was it it sounds
amazing an amazing trend pedal I really
wanted to have kind of obsessed with the
magnets on amps and that's a whole
proprietary vibrato that they've got but
I can't afford a magnet job and this is
as close as a yet I think until I'm able
to afford one of those beautiful amps
magnet oh and if you're listening yeah
so great trim and three different kinds
of reverb they do the 60 spring
seventies plates and then the eighties
rack reverb which is I use on a lot of
songs cuz it's just sounds like the
universe it's awesome I love it that's
really it I had a lot more pedals but I
cleaned it up because I found for what
we're doing now that's all I really
needed and amp
so this is a friend of mine I used to
work at a guitar store in Toronto called
caps on music it's like a specialty
vintage guitar store that's how I knew
about the Gretsch double anniversary
because we had an actual 65w anniversary
come in and it was the nicest electric
guitar I ever played so somebody bought
it and I've been looking for one ever
since and that was my compromise I'll
just get a reissue and it's wonderful
beautiful guitar so the amp I worked at
capsule where I saw that anniversary one
of the guys in the repair shop this is
him
Antonio tashera he started getting into
amp building he had a friend that was
making jassi's he was already he had
been messing around with it for years
but he got serious about it he asked us
if we wanted to all learn about our
building and what amps would we like to
do all we had to pay for was the cab
speaker some of the guts and the chassis
so I think this amp cost me 400 bucks to
build and it's as close as we could get
to like the Neil Young late 50s tweed
deluxe that's all we took a poll in this
shop five people and everybody wanted to
build that out so it was easy easy
decision to come to I started out trying
to put the board together soldering and
I am terrible at soldering so I paid him
some money because I wanted to take it
on the road right away and he agreed to
put it all together for me and she did
and about half a week and yeah it's a
beautiful 50s tweed deluxe replica and
I've used that for over 10 years now and
I wouldn't change a thing about it so if
you want to see more no.not gear just
pictures of us traveling tired people
you can visit Great Lakes warmers on
twitter at Great Lakes swim and on
instagram at great underscore lake
underscore
swimmers
you