To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Namaskar, so welcome to the third week of our course on basic electrical circuits. So
today we will start the discussion on network theorems and in this particular lecture we
will discuss about the linearity properties and the source transformation.
So let us start the topic on linearity property. So what is linearity? Linearity is the property
of an element describing a linear relationship between cause and effect. So cause can be
an input like if you provide voltage or current input which causes the element to either absorb
or dissipate the energy. So voltage or current source is causing some phenomena inside the
circuit and as a result that is effect you will get some output voltage or current a
particular element. So the cause and effect will be having the relationship which is linear
in this case.
Now although the property applies to many circuit elements but in this particular lecture
we will limit our applicability to registers only because it is easier for us to understand
the properties in terms of registers and then we can scale it up for other linear elements
like inductors and capacitors. Now the linearity property is a combination of both homogeneity
and additivity. Now what is homogeneity? Homogeneity means the property which requires
that if the input or you can say that excitation of the network is multiplied by a constant
then the output is also multiplied by the same constant. That means that your excitation
and the response will have homogeneity means if you scale up a particular voltage input
by say constant K. So output effect that may be the voltage across a particular element
or current flowing through that particular element will also be multiplied by the same
constant K. So now let us see how we will define it.
Let us take the example for one register. It is following Ohm's law. So as per Ohm's
law what you can write for voltage? Voltage would be current I and multiplied by resistance
R. Now if it is following the homogeneity property it means that if current is increased
by constant K then voltage will also be increased by constant K. So in that way what you can
write? You can write K into I R is nothing but K into V. Now after homogeneity if you
are asked to find what is the additivity property. So additivity property will say that the response
to a sum of inputs is the sum of responses to each input applied separately.
Now suppose if in the circuit you have two voltage sources that may be you can say V
1 and V 2 which are applied across a register R. So if you apply Ohm's law this will become
V 1 is nothing but and V 2 will be V 2 into R. So V 1 and V 2 we both are applying separately
to a register R. Let us take one DC source and we have register R. We have another DC
source and suppose it is connected through sum. So you have switch connected either for
voltage that is V 1 or two voltage V 2. So now when it is connected to V 1 then you
will have some current I 1 flowing through it and the V 1 will be across it and you will
get I 1 into R. After getting this value if you switch over from point 1 to point 2 it
means that now it is connected to voltage V 2. So it will become say this current is
now I 2. So V 2 would be I 2 into R. Now when you apply both V 1 and V 2 at the same time
suppose if your current should be sum of individual currents provided by individual voltages and
it will follow this equation like V 1 plus V 2 would be equal to I 1 R plus I 2 R. So
this is basically called as a additivity property means you can add the responses of the individual
voltage or current sources and get the final response that may be in the form of current
or voltage.
Now we say the resistor is a linear element. Why? Because the voltage and current relationship
of the resistor satisfy both the homogeneity and additivity properties. So what we can
say in general the circuit is linear if it is both additive and homogeneous. Now what
is a linear circuit? Linear circuit is the circuit which contains only linear elements,
linear dependent sources and independent sources. So in the linear circuit the output is linearly
related to its input. So now although the circuit may be linear but its input output
relationship may become non-linear. So can we apply the homogeneity and additivity in
that case? So if suppose your input is voltage and output is power across a resistor so what
it will the what relationship they will follow? They will follow relationship like P is nothing
but either I square R or V square R. So now if you see this particular equation
the relationship between voltage and power is not linear. So in that case you cannot
apply the homogeneity and additivity property for getting the power across the resistor
because these are not linearly related. So that is why whatever the theorems we will
cover in this particular module will not be applicable to power because the relationship
between input and output is not linear.
Now let us take one example to better understand the linearity property. Let us consider one
linear circuit shown in the figure below. Here we have linear circuit which is inside
this particular box we do not know what is the configuration of that circuit. We know
that some input is being applied that is V s and we are finding out what is the value
of current flowing through the resistor R. Now the assumption is that there is no independent
source inside the linear circuit. So the source is only V s and the output which we want to
measure is current flowing through resistor R.
Now if current through the load R is the output and in one case when you apply V s equal to
10 volt we get current as 2 ampere. So suppose you are doing one experiment where you do
not know what is inside but you are applying one voltage source across its input terminals
and connecting a load R across its output terminal and you are measuring current I.
So you can say that if you have added one emitter here and you are measuring the value
of current through this emitter. Now if you have applied 10 volt to the input of a linear
circuit and you got current I as 2 ampere. So suppose if you are asked to find out the
value of current I when voltage V s is 1 volt and you know that this is a linear circuit
without doing the experiment you can straight away say that current flowing through that
resistor would be 0.2 ampere when voltage source of 1 volt is applied across the input
terminals. Similarly if you want to get current as 1
ampere through the resistor what would be the value of the voltage input? The voltage
input value would be 5 volt because this is a linear circuit and it will follow the homogeneity
property which says that if you scale up or scale down through some parameter K the input
output relationship should not change. So if input is increased or decreased by constant
K then output will also be increased or decreased by the same constant K.
Now let us take one example to understand the properties which we discussed like linearity
and the additivity and homogeneity. Suppose the voltage source V s is 12 volt in the circuit
and we have to find out the value of current I naught flowing through 4 ohm resistance
when voltage is 12 volt and when voltage is 24 volt. So this would be the case of homogeneity.
What we have to do? We as we discussed in last week we did match analysis to solve these
kind of circuit. So here we will apply match analysis again and try to find out the current
value I naught in first case that is when V s is equal to 12 volt.
So if you apply KVL to the two loops that is suppose if you take match I 1 and I 2,
match currents I 1 and I 2. So for this particular match you can write the match equation like
12 I 1 minus 4 I 2 plus V s is equal to 0 because there are total 3 resistances, total
sum of those resistances is 12. So it will be 12 I 1 minus 4 I 2 because I 2 is flowing
in opposite direction of I 1. So it will be minus 4 I 2 and then plus V s equal to 0.
So this you will get from match 1. From second match similarly you can get the value like
minus 4 I 1 because I 1 and I 2 are in opposite direction plus 16 I 2 total resistance in
this particular match is 16 ohm. So plus 16 I 2 minus 3 V s because it is going from minus
to plus the current I 2. So it will become minus 3 V s and similarly minus V s because
it is flowing from minus to plus. So you can simply write the equation for second match
also.
Now if you see what is the value of V x? V x would be 2 times of I 1. So the equation
can be written as what? You can simplify minus 10 I 1 plus 16 I 2 minus V s is equal
to 0. This is in this case right and you can use the both of the equations and solve it
you will get I 2 is equal to V s by 16 76 and the case 1 when you take V s is equal
to 12 volt you will get I 0 that is nothing but I 2 in this case because I 0 is nothing
but I 2. In that case the value of I 2 would be 12 by 76 ampere in case of I 0.
Now you need not to calculate again the complete circuit equation for V s is equal to 24 because
you know that this particular circuit is a linear circuit. So what you will do? You
will simply use the homogeneity property and you can say that the I 0 in that case when
V s is 24 volt would be 24 by 76 ampere. So it means that when source value is doubled
I 0 value will also be doubled because of homogeneity property.
Now let us talk about one important theorem called superposition theorem. Now if a circuit
has two or more independent sources the one way to determine the value of a specific variable
that is may be voltage or current is to use nodal or mesh analysis which we discussed
in the previous week. Now in another way to determine the contribution of each independent
source to the variable separately and then you add them up to get the final variable
value. So in this way when you determine the contribution of each independent source separately
and then adding up is called as a superposition theorem.
So what you do in case of superposition theorem? In superposition theorem the voltage across
an element is the algebraic sum of voltages across that element due to each independent
source acting alone. So this will give you a complete property of a superposition theorem
where if you have multiple voltage sources or multiple current sources in the network
you have to take one source at a time and find the voltage across or current through
an element of your interest means the given element property which you want to find out
and then when you get the variable value independently for each and individual voltage or current
source you will add them up and get the final value of the variable that may be the voltage
or current. Why? Because the superposition is following the linearity property. So the
homogeneity and additivity both would be applicable when you have to use superposition theorem
to solve the circuit.
Now this principle of superposition theorem helps us to analyze a linear circuit with
more than one independent source by calculating the contribution of each independent source
separately. Now before applying this superposition theorem we have to keep two things in mind
that when you try to solve the circuit you will consider only one independent source
at a time while the other independent sources are turned off. So turned off means what?
In the case of voltage source it will be short circuited and in case of current source it
will be open circuited. So if you have multiple voltage and current sources in the network
you will take one source at a time and other sources would be either short circuited if
there are voltage sources and the current sources would be open circuited.
Now second important thing is that you cannot apply that particular assumption in case of
dependent voltage or current sources and you have to keep them with the circuit and solve
them as you have solved for other circuits like using nodal analysis or mesh analysis.
So dependent source may be voltage or current source should be left intact in the circuit.
So in summary what you can say for applying the superposition theorem you will first turn
off all the independent sources except one, find the output that may be the voltage or
current due to that active source using any network analysis technique that can be either
simply Kirchhoff voltage or current law or may be the nodal or mesh analysis.
Now you will repeat step one and two for other independent sources. So these two steps would
be repeated for other independent sources taken one at a time. Then find the total contribution
by adding them algebraically so that you get the contribution of all the independent
sources. So these four steps are utilized to apply the superposition theorem and finding
out the circuit variables.
Now one major disadvantage you will see when you apply superposition theorem that is that
you need to have more work when you are using superposition. The reason is simple because
when you apply superposition theorem you have to take one source at a time. So it means
that the same circuit you have to analyze multiplied by number of independent sources
in the network. Suppose if there are three independent sources that means that you have
to analyze three circuits and after that you have to combine to get the final output.
So it means that the same circuit you have to analyze three times by making them simpler.
Simpler means the current and voltage sources would be either short circuited or current
source would be open circuited and voltage source would be open circuited except one
which you are going to analyze in that circuit. So this will be giving you more work to analyze
the circuit but the important thing is that it helps us to reduce very complex circuit
to very simple circuit because you are replacing the voltage source by short circuit and current
source by open circuit.
So using superposition theorem although you are analyzing multiple circuits by taking
one voltage source or one current source on at a time eventually you may get the solution
very early because the circuits are now simpler as compared to having the multiple sources
connected and you are analyzing that circuit and superposition theorem is based on linearity.
So it is easier to analyze and then add the responses individually to get the final outcome.
Now that we have discussed earlier that the relationship between voltage and power and
current and power is non-linear. So you cannot apply superposition theorem to find out the
value of power. Why? Because power absorbed by resistor depend on a square of the voltage
and current which is non-linear relationship between voltage and current.
Now if you need to find out the value of power what you can do? You can either find the value
of current or voltage with the help of superposition theorem and then finally calculate the value
of power after getting the value of current and voltage. So what you can do? You can use
simple relationship V is equal to I R and using superposition theorem you can find out
the value of voltage across a resistor using superposition theorems. When you get final
voltage you can simply calculate the value of power with the help of this equation that
is P is equal to V square by R. So you need not to go for finding out the value of power
P directly using superposition theorem but you can use the linear relationship of V and
I and use superposition theorem to solve the circuit.
Now let us take one example so that you can understand the superposition theorem more
clearly. Now if there are two sources, voltage sources if you see in this particular circuit
you have two sources, one is voltage source another is current source. Now you need to
find out the voltage across 4 ohm resistor. So you can say that you are dividing the circuit
in two parts, you are taking one source at a time. So first you will take voltage source
and second you will take as current source and analyze the circuit. So suppose when you
take voltage source first and analyze the circuit you have got voltage across 4 ohm
resistor as V1 and when you apply circuit, apply current source in the circuit you get
voltage across resistor as V2. Since it is a linear circuit the final voltage across
resistor would be V1 plus V2. So let us take one source at a time, suppose if you take
voltage source first then what you will do, you will make current source as a open circuit.
So the updated circuit which you will see here would be like this where you will have
6 volt and then you need to find out the value of voltage across 4 ohm resistor. So
this will be a simpler circuit, so you have to just apply Kirchhoff voltage law and find
out the value of voltage V1 which comes out to be 2 volt in this case. Now to obtain V2
what you will do, you have to simply short circuit the voltage source and apply the current
source. So in that case what will happen, you have to use current division at this particular
node you will get the value of current flowing through 4 ohm resistor that is nothing but
2 ampere. So in that case voltage V2 you will get as 8 volt and finally using superposition
theorem what you can say, the total voltage when you have this particular circuit across
the 4 ohm resistance would be 10 volt.
Now let us take slightly complex problem where you have one dependent voltage source in the
circuit. So now you have to apply the superposition theorem, here you will see that you have one
current source, one voltage source and your objective is to find out the value of current
I naught which is flowing through 5 ohm resistance. So you divide current I naught as I naught
dash and I naught double dash, I naught dash is contribution due to 4 ampere current source
and I naught double dash is the contribution due to 20 volt voltage source.
Now to obtain first I naught dash what we have to do, we have to short circuit the 20
volt voltage source. So we will get this circuit where we have short circuited the voltage
source. Now we cannot change or we cannot short circuit or open circuit the dependent
sources. So in this case this is dependent voltage source, so we keep intact with the
circuit. The value of this voltage source will be 5 I naught dash because right now
I naught dash is flowing in this particular circuit which we are analyzing while short
circuiting the voltage source.
So now what we have to do, we have to apply mesh analysis to obtain the value of I naught
dash. So we see there are 3 loops, now for each loop if we apply the Kirchhoff law then
for I 1 the current would be 4 ampere which is straight away you can see from the figure.
For loop 2 if you apply Kirchhoff voltage law you will get minus 3 of I 1 plus 6 of
I 2 because there are 3 resistances of total 6 ohm value minus of I 3 because I 2 and I
3 are in opposite direction minus 5 I naught dash. So this is the value of dependent voltage
source since you are going from minus to plus then it will become minus 5 I naught dash
and equal to 0.
For loop 3 if you see you can write the mesh equation using KVL that is minus 5 I 1 minus
I 2 plus 10 I 3 plus 5 I naught dash. So here you are going from plus to minus so it is
5 I naught dash and equal to 0. Now since it is a dependent source loop equation alone
is not able to solve the circuit we have to take one node and apply KCL also to find
out the current relationships. So if you put KCL at node 0 I 3 would be nothing but I 1
minus I naught dash or you can say I 1 is nothing but I naught dash plus I 3.
So when you simplify you will get I 3 is nothing but I 1 minus I naught dash. I 1 we
know because we just found that I 1 is equal to 4 so this I 3 will become 4 minus I naught
dash. Now this value you will put in this equation as well as in this equation and so
you will get two equations which are in terms of I 2 and I naught dash. So if you simplify
you will get value of I naught dash as 52 by 17 ampere. Now to obtain I naught dash
that is the contribution of voltage source what you will do? In this case your current
through 5 ohm resistance is I naught dash so your dependent voltage source value will
become now 5 I naught dash. Now if you write again the mesh equation for both of the meshes
which are there in the circuit while your current source is open circuit for loop 4
you will write the equation as 6 I 4 minus I 5 minus 5 I naught double dash equal to
0. Similarly for loop 5 you will write the mesh equation as minus of I 4 plus 10 of I
5 minus 20 plus 5 I naught double dash. So why minus of I 4 because current flowing
through 1 ohm is for I 5 it is in this direction and I 4 it is in opposite direction. So minus
I 4 would be because of this one open resistance, 10 I 5 because there are three resistances
of total value of 10 ohm minus 20 for this voltage source and plus 5 for plus 5 I naught
double dash for this dependent voltage source. Now I naught double dash is nothing but minus
of I 5 which you can see from here because I 5 is flowing in opposite of I naught double
dash. So instead of I 5 we can write minus I naught double dash in these equations.
So when we put the value of I 5 you will get these two equations and when you will solve
you will get I naught double dash as minus 60 by 70 ampere. So finally when you will
take this particular circuit that means the final circuit you will come to know that the
I naught is nothing but I naught dash plus I naught double dash. You have found the value
of I naught dash and I naught double dash you just add the value you will get final
value of I naught that is minus of 0.4076 ampere. So this way you can use the superposition
theorem to calculate the circuit variable. So in this case the circuit variable was current
flowing through 5 ohm resistance. So using superposition theorem first you removed the
voltage source and then you remove the current source and finally the current flowing through
5 ohm resistance because of both of the sources independently were summed up because it will
follow linearity property. So with this we close our two days session.
We will talk about few other theorems. Thank you.