To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Namaskar, so in the last class, we started our discussion on the topic called network
stability, and we will continue our discussion today about the network stability, and also
we will discuss about the network synthesis.
So, let us start the discussion of today's lecture. So, in the last class, we discussed
about the network stability. So, what we discussed that the circuit is stable if its impulse
response that is H t is bounded as time t tends to infinity. So, that means that impulse
response will converge to a finite value when time t tends to infinity, and it will
be unstable if H t grows without bound as t tends to infinity. So, we also discussed
that in mathematical term, we can write it as limit t tends to infinity H t is finite.
Now if H s is the Laplace transform of H t, we discussed that it can be represented
as N s by D s in the Laplace transform domain. The impulse response H t, H s that is the
Laplace transform of the impulse response H t must meet the following requirement in
order to circuit to be stable. So, what was those requirements? One requirement which
we discussed was the degree of N s must be less than the degree of D s that is degree
of numerator expression should be less than the degree of expression in denominator.
Next requirement is that all poles of H s must have negative real part. All poles means
all roots of the denominator expression must have negative real part. Now we also discussed
that the circuits which are made up of passive elements that is RLC elements and independent
sources will not be unstable because if we say that these can be unstable that means
that there would be some branch currents or voltages which would grow indefinitely with
source is set to 0 which generally is not the case when we analyze the RLC circuits.
So, let us verify our saying that the passive elements and independent sources elements
network will not be unstable. So, let us see the example that is what we also discussed
in the previous lecture that if it is a series RLC circuit, we can say that V naught by V
s can be represented as 1 upon L c divided by S square plus R by L s plus 1 by L c. And
we also discussed that the denominator component that is the denominator expression that is
S square plus R by L s plus 1 by L c is equal to 0 is already we have discussed when we
were discussing about the series RLC circuit. So, this would be the characteristic equation
which we have already discussed in the past. So, we can say that the poles of the denominator
expression will have the roots of the denominator expression will have value p 1 2 is equal
to minus alpha plus minus root of alpha square minus omega naught square. And we also stabilize
that alpha is equal to R by 2 L and omega naught is equal to 1 by root L c.
Now, if you see that the RLC is greater than 0 when if this is the condition the 2 poles
will always right in the left of a plane. So, that means, that in the network which
contains R, L and c components will not be unstable because the poles which we get from
the given transfer function of the circuit will have always negative real part. The critical
condition which we discussed was that when R is equal to 0 the damping coefficient would
be 0 in that case the circuit will become oscillatory.
Now, there are certain circuits like active circuits or the passive circuits which contains
the control sources which can supply energy and that is why they can be unstable. The
oscillator is another example of such circuits which is designed to be unstable because it
will not die out to some constant value when the time t tends to infinity. So, when you
design the oscillator the transfer function of oscillator can be given as H s is equal
to N s divided by S square plus omega naught square which can be represented as N s divided
by S plus j omega naught into S minus j omega naught.
So, you will see that the poles of this particular transfer functions are lying at the imaginary
axis. So, the poles are minus j omega naught and plus j omega naught. So, when you have
poles lying on the imaginary axis that means, that the circuit is oscillatory the output
which you will get in this case is sinusoidal. So, when you have this kind of situation then
you will say that the circuit is oscillatory. Now, let us take one example so, that we can
understand the concept we need to determine the value of k for which the circuit which
is given in the figure is stable. So, now, here you see that you have one energy
storage component that is capacitor 1 by S c is the value of the capacitance in S domain
and we have two resistances we have one dependent voltage source which depends upon the current
flowing in this loop. So, we need to find out the value of k for which this particular
figure will be stable. So, what we have to do we have to first use the match analysis
and write the equations for these two loops. For first loop what you can write V i is nothing,
but R plus 1 by S c both are in this particular loop into i 1. So, that is the current which
is flowing in these two components minus i 2 upon S c because a for in the capacitor
i 1 is flowing in this direction while i 2 is flowing in the opposite direction. So,
your value for V i would be R plus 1 by S c into i 1 minus i 2 by S c. So, this is the
first equation which you got from loop 1. Similarly, for loop 2 what you will write
since i 2 is flowing in the opposite direction is starting from minus to plus. So, you will
get the dependent voltage source value as minus k i 1 then plus R plus S c R plus 1
by S c multiplied by i 2 because i 2 is flowing in these two. So, then you get R plus 1 by
S c into i 2 minus i 1 by S c because i 1 and i 2 are opposite in this capacitor component.
So, when you rearrange you will get another equation which is in the form of i 1 and i
2. So, now, you have these two equations if you represent them in matrix form how you
will write you can write these two equations as V 1 is there in the left hand side here
the value is 0. So, you will write V 1 0 then you will arrange the components. So, corresponding
to i 1 we have R plus 1 by S c and for i 2 it is minus 1 by S c and similarly here i
1 is plus i 1 component is k plus 1 by S c with minus sign plus R plus 1 by S c for
i 2. So, when you compile the matrix you will see
that if you want to find out the characteristic equation of this particular circuit governing
characteristic equation then what you have to do you have to just find out the determinant
of the matrix which we have just compiled. So, what would be the value of determinant.
So, determinant let us say it is delta. So, we will say that the value of determinant
is nothing, but R plus 1 by S c square minus because minus minus will become plus and then
you will see another minus for the determinant calculation and then multiply by 1 by S c
in this particular term you will get minus k by S c minus 1 upon S square c square.
So, when you rearrange the term you will see the value of determinant is nothing, but S
R square c plus 2 R minus k. Now, if you put the value of delta equal to 0 that would be
nothing, but the characteristic equation then what you will get you will get the value of
single pole because here this is the numerator component is only containing the degree of
S is 1. So, you will have only one single pole. So, the value of pole p would be k minus
2 R upon R square c. So, now, if you see this particular value
of pole p you will say that the pole would be negative when k is less than 2 R. So, what
we can say that the circuit will be stable when k is less than 2 R otherwise for k greater
than 2 R the circuit would be unstable. So, this you can verify the you can find out the
value of k for which your circuit will be stable.
Now, let us talk about another concept called network synthesis. So, what is network synthesis?
Network synthesis is the process of obtaining an appropriate network for a given transfer
function. Now, this network synthesis is just opposite to our network analysis where we
get the circuit and we try to find out the transfer function of the given circuit. So,
network synthesis is easier to carry out in S domain than in the time domain. So, when
we differentiate between network synthesis and network analysis we can say that in network
analysis we find the transfer function of a given network while in case of network synthesis
we reverse the approach that means, we are required to find a suitable network for a
given transfer function. So, in case of network synthesis what we will do? We will get one
transfer function and from that we will try to find out the suitable network which satisfy
the transfer function. Now, in network synthesis there may be many
different answers to or possibly no answers because there may be many circuits that can
be used to represent the same transfer function. So, we need to find out the most suitable
answer for given transfer function while in network analysis the things are opposite means
there will be only one answer means for network analysis we will always get one single transfer
function, but in case of network synthesis one transfer function can represent multiple
circuits. So, let us understand these concepts with the help of examples because that would
be easier to understand the synthesis aspect of the circuit.
Let us see that there is one transfer function given as V 0 S upon V i S is equal to 10 upon
S square plus 3 S plus 10. Now, let us say that this is the circuit where L and C are
presented and C is in parallel with R and the ratio that is V 0 by V i is nothing, but
the ratio between voltage across resistance R divided by input voltage. So, now, we have
got this transfer function and we have the idea that this would be the circuit what we
have to do since we have three unknowns here R L and C we will fix one value that is R
why we will fix that value we will see when we will progress with the solution that why
we are fixing value of R and finding out the value of C.
So, we will take two cases where R is 5 ohm and R is 1 ohm and we will try to find out
the value of L and C. Now, first what we have to do we have to find out the S domain equivalent
of the circuit. So, when you create the S domain equivalent of the circuit it will look
like as shown in the figure. So, this is V i S that is the input voltage V 0 S is across
the resistance R and then the inductor will become S L and capacitance will be 1 by S
C. Now, the capacitor and the resistor are in parallel and this voltage would be applied
across both the components because both are in parallel. So, we can find out the equivalent
impedance of this particular parallel combination. So, what the value we get we get since R is
in parallel with 1 by S C when we solve that we will get the equivalent impedance in S
domain that is nothing, but R upon 1 plus S R C.
Now, we can utilize the voltage division principle since this V naught is also across the capacitance.
So, basically the parallel combination of capacitance and resistance will have the voltage
V naught S across them. So, we can utilize the voltage division principle and find out
the value of V naught in terms of V i. So, what we can write V naught is nothing, but
the value that is R into R divided by 1 plus S R C divided by the S L that is in series
with the parallel combination of the R and C. So, in denominator we will get S L plus
R divided by 1 plus S R C into V i. Now, the transfer function which we get is
V naught by V i and when we will rearrange we can say that it is equal to 1 upon L C
divided by S square plus S upon R C plus 1 by L C. Now, if you see the transfer function
that is 10 upon S square plus 3 S plus 10. So, that should be equal to 10 upon S square
plus 3 S plus 10. So, if you compare both of them you will get 1 by L C equal to 10
and 1 by R C equal to 3. So, these are the 2 values which we will get when we compare
the transfer functions. Now, as we have only 2 equations and 3 unknowns
we cannot find out the solution until unless we fix 1 quantity. So, that is what we discussed
in the last slide that we need to fix at least 1. So, that we can get the answer. So, what
we had in our question is let us fix value as R is equal to 5 ohm. So, when you put R
is equal to 5 ohm the value of C you will get is 66.67 milli Farad and L is 1.5 Henry.
Now, when you have R is equal to 1 ohm then C will be 0.333 Farad and L is equal to 0.3
Henry. Now, making R is equal to 1 ohm generally is said that it is normalizing the design
because you are fixing R as 1 ohm means you are normalizing the design of the circuit.
So, with this you can find out the value of unknowns that is L and C, but you have to
fix at least 1 component. So, in this case we fix the value of resistance R.
Now, let us take another example in this case the transfer function is given and we need
to find out the value of L and C again when the value of R is given that is 2 ohm. So,
first task which is required is that convert the given circuit into S domain. So, here
you see that R L and C both all of three are in series. So, the equivalent S domain of
the given circuit would be C will be replaced by 1 by S C L in place of L we will see S
L V naught T will become V naught S in S domain R will remain same and V i at any time T will
become V i S. So, what we have to do next? Now, we have to write the loop equation and
represent the voltage across R as part of V i. So, that we get the transfer function.
So, when we write the loop equation and rearrange the voltage across R as in terms of V i S
we can write V naught by V i is nothing but R because voltage V naught is across R divided
by all three series components. So, we can write 1 upon S C plus S L plus R when we rearrange
you can simply write R by L S divided by S square plus R by L S plus 1 by L C.
Now, you have got this transfer function based on the unknowns which you have in the circuit
the transfer function which is given to us is 4 S upon S square plus 4 S plus 20. So,
if you compare both of them you can simply say that R by L is nothing but equal to 4
and 1 by L C is equal to 20. So, here again you have two equations, but you have three
unknowns. So, we fix value of R as 2 ohm. So, when you fix the value of R as 2 ohm you
can simply get the value of L as 0.5 Henry and capacitance C as 0.1 Farad. So, basically
with this particular process you can easily find out the values of the unknowns. So, in
this case the unknowns were C and L and we fix the value of R. So, this is how you progress
when you are asked to do the network synthesis. So, with this we can close our today's session.
So, in this session we discussed about the network synthesis in detail and also carried
out our discussion on network stability and particularly in this week we discussed about
the application of Laplace transform in various circuit analysis. So, we close this week session
with this note that we will discuss the two port network in the next week.
Thank you.