noc20-ae13-lec05_Lecture-05: Review of Fluid Mechanics, Thermodynamics

IIT Kanpur July 201
20 followers
1 Video View·Dec 3, 2023
Lecture-05: Review of Fluid Mechanics, Thermodynamics
Discussion on the fluid mechanics and thermodynamics review. So, what we have been talking about
that the control mass and control volume system and what how Reynolds transport theorem can
be applied to derive all the basic conservation laws. And if you just recall from the last
lecture, this is what we have shown that for a different property and how you can derive
all these different conservation equation.
And we have with this particular one, we have talked about the mass conservation equation
or rather continuity equation and how to reach the incompressible limit. So, now, we will
look at the similarly momentum equation. Now, one can always derive this like an what is
typically done in any fluid mechanics course or any fluid mechanics book that taking a
elemental control volume and you can derive because it is nothing but the Newton's law
of motion F equals to m a. From there one can derive the same set of equation, but the
idea here is not to derive in that fashion rather looking at the things from point of
view of the RTT. Now, so here n would be rho and eta would be velocity vector for
momentum equation. So, what one can write that d rho this is
n is if you see n is this is the forces let us say vector. So, this would be forces, so
d rho by d t for control mass system which is nothing but the all the forces that is
summation of all F s plus F b. So, F s is surface force and so these are act at the
boundary of the control volume or like for example, reaction forces, pressure forces,
shear forces these are all surface forces and F b is the body force. So, these forces
are acted on the material inside the control volume and this could be proportional to the
mass or the volume of the fluid. For example, gravitational forces, electrostatic forces,
electromagnetic forces like that and this F is the sum of all the external forces which
are acted on that particular. Now, this F is del del t of so control volume rho v d
v plus control surface v rho v dot d F. Now, if we say let us say the body forces are b
and all surface forces we can like T d A, these could be pressure, shear stress something
like that then what we get is that control volume v rho d v plus control surface minus
p d A which is d dt of control volume rho v d v plus control surface v rho v dot d A.
Now, this one particular one we can write like control volume delta dot v rho v d v
then what we get finally, clubbing this term and this also we can use and then finally,
what we can write del del t of rho v plus delta dot rho v v equals to minus del p plus
del dot tau plus rho F. So, this is what you get from that. Now, similarly this is
in vector form one can write this equation in also indicial notation and that would look
like just for your reference I am just providing that thing, but you can look at any of these
fluid mechanics book to review this derivation or the different notation for the same.
So, these are now we look at the energy equation and for energy equation also you can derive
similarly, but for that we just look at the first law of thermodynamics. So, it accounts
for the rate of change of energy either a system or a control volume. So, what it states
that the net heat added to a system should be equal to the sum of the change in stored
energy of the system and the work done by the system or the surroundings.
So, typically if you let us say have a system like this then the heat added here this is
the work output of the system. So, when heat is added this should be positive when the
work is output that should be also positive. So, we can write the delta E naught plus W
where E naught is the stored energy which is E k, E p, E i e and in differential form.
So, you write d q minus d w equals to d E naught and per unit mass E naught would be
energy per unit mass, this is kinetic energy per unit mass, this is potential energy per
unit mass and this is internal energy per unit mass. So, we have all this terminology
and also one can write that this E naught should be V square by 2 plus z plus E which
is nothing but E naught by m. Now, there are two kind of work, one is the flow work which
is work done on the surroundings and second would be soft work. So, the soft work is the
any other form of work for example, work transfer through the control surface by shaft electric
current etcetera. Now, similarly if we use the RTT, so we write
d E naught by dt would be del del t of control volume E rho d V plus control surface E rho
V dot d A. So, you put things back there and so this once you take the divergence and
all this, so what you can look at those couple of steps further for detailing and you get
back del del t of rho E naught plus delta dot rho V E naught which will be d Q by dt
W s by dt by dt. So, here W p is control surface p by rho rho
V dot d A, if I write in control volume del dot rho V p by rho d V. So, the equation transform
back to rho E naught plus del dot E V E naught plus p by rho d Q by dt minus d W by dt, this
is soft work and heat transfer. So, since E naught equals to E plus u square by 2 plus
g z, so one can write it back del dot rho V H plus V square by 2 g z equals to Q minus
W, so that is what you get. Now, if you look at, so this derivation also
one can do in a conventional approach. Now, quickly what second law of thermodynamics
states, it is talk about the entropy and what if you have your process is reversible, then
this can be written as for reversible process and the d s is the change in entropy in a
reversible heat exchange of d Q and a temperature. Now, if it is an irreversible process, then
d s would be always d Q by T for irreversible process. Now, if the process is reversible
and adiabatic, then d Q is 0 which means d s is 0 that means, there is no change in entropy.
So, this process is called the, I mean isentropic process and the second law is used to basically
describe the ideal operation of an engine for the calculation of efficiencies and other
parameters. Now, some other thermodynamical property of the gases like, again if you look
at from first law, what we can write d Q equals to d E plus d W. Now, for reversible
process we can write d W equals to p d V and then the Gibbs equation becomes T d s equals
to d E plus p d V and the perfect gas equation states that p equals to rho R T and we can
write the, so if these are thermally perfect gas, then E would be only function of temperature
and H would be E plus p by rho. So, which follows that H is function of temperature.
Now, the definition says specific C V is d by d T and C p is d H by d T. So, what we
get? H equals to E plus p by rho which is E plus R T. Now, if I take d H by d T, this
is d E by d T plus R which means C p equals to C V plus R. So, if you take both side with
the, so C p minus C V by C p equals to R by C p which would be 1 minus 1 by gamma R by
C p. So, what we can get? C p is gamma R by gamma minus 1 while C V is R by.
Now, some other equation what we can write like from the T d s is d E plus p d V. So,
that gives me that H also equals to E plus p by rho. So, or rather H equals to E plus
p V. Then, we can write d H equals to d E plus p d V V d p. So, which is T d s equals
to d H minus V d p. So, here d E plus p d V, this one can use this relationship here
and so this is d H minus d p by. So, if you divide both side by T, this would become d
s by. So, you get d s equals to d H by T minus d p by rho T. So, you write d s equals
to d H by T minus d p by. So, we can write like d H equals to C p d
T. This is for calorically perfect gas. So, there are two types of situations. One is
calorically perfect, another is thermally perfect. Once we use this relationship. So,
for isentropic process, this should be d s equals to 0. So, what we get is C p d T
by T equals to r d p by p. Now, we can do the integration on both sides for constant
specific, what we get C p ln T 2 by T 1 r ln p 2 by p 1. So, ln p 2 by p 1 ln T 2 by
T 1. So, that gives us back p 2 by p 1 is T 2 by T 1 to the power C p by. So, these
are the sort of relationship that one get from this.
Now, we have already seen some other relationship like what we have seen C p is r gamma by gamma
minus 1 and C p by r is gamma by gamma minus 1. Then, this ratio of p 1 by p 2, we can
write rho 1 r T 1 by rho 2 r T 2. So, T 1 by T 2 whole to the power gamma by gamma minus
1, one can write rho 1 by rho 2 T 1 by T 2. Now, since we have p 2 by p 1 T 2 by T 1 gamma
by gamma minus 1 which is C p by r, what we get rho 2 by rho 1 equals to T 2 by T 1 1
by gamma minus 1 or p 2 by p 1 equals to rho 2 by rho 1 to the power gamma. So, this
is what you get the relationship for all the isentropic process, where there is no change
in entropy. So, keep that in mind these are only for isentropic process.
Now, for if we have for non isentropic process, what we can write S 2 minus S 1 is C p T 2
by T 1 minus r l n p 2 by p 1. So, that you get from this equation and getting the integration
between two points, you get that relationship for non isentropic process. So, if it is a
constant pressure for constant pressure, this delta S is C p l n T 2 minus T 2 by T 1. So,
that either you can show it from here using this equation for constant pressure or you
can draw a sort of T S diagram like this. And so, this is let us say p equals to p 1
here, p equals to p 2 here. Now, this is on the constant temperature line. So, if the
temperature line is constant, this delta S would be minus r l n p 2 by p 1. So, these
are some of this relationship that is commonly used for different kind of processes and you
should be aware of that. Now, with that brief idea, I mean now the
whole idea is that you can review all these details. These are just to sort of refresh
your memory about all these. So, you can look at any other text book and all these just
to go into the detail. So, we will move to that with the discussion on compressible fuels.
So, now what important thing for the compressible flow discussion here, what we will be discussing
here the working fluid is. So, working fluid is to be perfect gas. So, that is one of the
thing that. So, whatever thermodynamic relationship that we have just looked at, they will also
be true and can be used. Second important thing for compressible flow is that density
is no more constant. So, this is a variable density situation and it changes quite drastically.
It is not like that it remains constant. Now, the first thing which comes is speed
of sound. How do we define speed of sound? It is just like air is composed of molecules.
They are moving in random motion, but they have a mean velocity and average energy which
is quite known. Now, sine waves are sort of weak pressure wave. So, sound waves are pressure
waves and they are carried by moving air molecules. Now, when there is a source of sound, it releases
some energy which is usually picked up by the neighboring molecules and causing an increase
in their kinetic energy. So, obviously if there is a source which emits
the sound wave or the noise. So, these are picked up by this particle surrounding it
and once they pick up that, so there would be increase in the kinetic energy. Now, this
kinetic energy which is picked up by the neighboring immediately molecules, they are transmitted
from one molecule to the another molecule and this process of this transmission happens
through molecular collision. So, this sound energy which is from here, it gets transmitted
through the molecular collision. So, the pressure wave is generated due to that. So, this pressure
wave is generated by the source is transmitted through the molecular collision.
So, when that happens, our eardrums actually pick the variation of pressure wave. So, there
this variation of pressure waves, these are picked up by our eardrums and it passes by
and our brain sense it, thus we actually hear the sound. This is how actually we are
able to hear some sound which is generated somewhere else. Now, this transmission of
sound is accompanied by change in pressure density and temperature. So, Newton provided
a expression for estimating the sound wave which is del p by del rho at t. So, this is
where it was considered to be an isothermal process.
But later on, it was found that this transmission of sound wave through air or any gas is an,
so transmission through any gas is an isentropic process which means the definition would be
del p by del rho. So, this is what the definition which was kind of given later on. So, and
then since it is an isentropic process, we can see how one can estimate the sound wave
from here. So, we will just stop the discussion here and continue in the next lecture.
