noc19-ph02 Lecture 31-Introduction to different crystal type Part-I

IIT Kanpur July 201
20 followers
Dec 3, 2023
In the last lecture, we came across with the concept that you have many different types
of Bravais lattice, which are just the set of points, a geometrical set of points with
some properties, which I have already told you about, what classify points as a set of
points belonging to a Bravais lattice. However, another important property of these points
is that if they obey, that they remain invariant, this lattice, this collection and arrangement
of points, if it remains invariant under some particular symmetry operations like one of
the rotations or one or more of the mirror operations or one or more of the inversion
operations, if the system remains invariant under these operations, then you get special
class of Bravais lattices, which are important and those Bravais lattices are studied separately.
And amongst those 14 set of Bravais lattice is an important set, which is falls amongst
the cubic lattices. And as the name suggests, the points are arranged at the corners of
the cube. The spacing between consecutive lattice points is your lattice constant and
for a cubic system, the lattice constants are exactly identical. You know for a cube,
the sides of the cube have the same length. So, it is natural that the name comes as cubic
lattice. So, this is the simple cubic lattice, where the points are arranged at the corners
of the cube and A is equal to, A is the same along all the different directions, the lattice
constants are identical. A variant of this simple cubic structure is the body centered
cubic structure, the body centered cubic structure, where the lattice points are organized at
the edges of the cube, but there is one extra point which is sitting at the center of the
cube. This also follows some symmetry operations, remains invariant under certain symmetry operations
and this is called as a body centered cubic structure.
And finally, within this class of cubic lattices, we have the face centered cubic structure,
where again you have points which are at the edges of the cube, you have points which are
sitting at the edges of the cube, but additionally on each of the cube faces, you have points
which are sitting at each of the cube faces, the top and bottom face, the side faces, the
four side faces have points which are sitting at the center of each of these faces. So,
you have the simple cubic, you have the body centered and the face centered cubic structure.
The simple cubic is obviously the simplest of the structures and it is very easy to analyze
these structures. Amongst the other structures, we will now look at these crystal lattices
in a little bit more detail. So, first we look at the body centered structure. The body
centered structure, as I said, has atoms at the corners of the cube and has a atom at
the center and the lattice parameters are a, a and a, the lattice parameters are exactly
identical. So, you have atoms which are sitting on the corners of the cube and one in the
body of the cube which is in the center of the cube and this is your body centered cubic
structure. Now, for this body centered cubic lattice
of atoms, you can actually translate this entire structure over the entire space, this
collection of lattice points, you can translate it over the entire space, this set of points
you can move it along the x, you can move, repeat the same things along the y, z, minus
x, minus y, minus z direction and you will fill up the entire space, ok. So, you have
your body centered cubic structure lattice and then you can try and define what are the
fundamental or what are the primitive lattice vectors in this lattice.
So, the primitive lattice vectors in this lattice, this is BCC lattice, this is indicating
one BCC structure, another BCC structure, another BCC structure, there will be one in
between and then they will go in all three directions. Now, if you want to define the
fundamental, one of the ways of defining the primitive vector which will have only one
lattice per point, it will define and of course, first an area in which you will have only
one lattice point per cell, per primitive lattice cell and the corners of it or the,
it will be defined by the primitive lattice vectors, then one way of showing the primitive
lattice vectors, one choice of primitive lattice vectors for the BCC is this.
If these are the three cardinal directions, the x, y and z direction, the x direction
shown here, the y which is along this direction and the z which is along this direction, which
are the along the corners of a cube, but these directions do not form your primitive vector
directions. Rather, the primitive vector directions are, the primitive lattice vectors are one
which is along this, one which is along this and one which is along this. So, from one
corner of a cube, the vectors are pointing towards the BCC point, towards the body centered
point which is sitting in all the adjoining crystals or in the adjoining lattices.
The adjoining BCC lattice is the, it is pointing towards the adjoining BCC points. So, in terms
of x, y and z, you can write your A1 as half of A x cap plus y cap minus z cap, ok. It
is in the x, y plane plus x and plus y cap directions and this is in the minus z cap
direction. Similarly, A2 will be in the minus x cap direction and this will be in the minus
y cap direction. So, these are your primitive vectors for the BCC lattice.
And if those are the primitive vectors, this is your primitive cell, ok. If you look at
your BCC lattice, you can define your primitive cell which is the smallest volume of lattice
points which will have only one lattice point per cell. A1, A2, A3 which are the primitive
lattice vectors I have already shown you and this is the volume which is made by the primitive
lattice vectors, the primitive lattice volume and it is pretty complicated.
So, as the lattices get more and more complicated, your primitive lattice cells can also get
more and more complicated. Of course, there is no, it is not a unique choice, this is
one way you can also draw the Wigner Seitz cell for this, ok, which I leave it to you
to look up in a book like Ashcroft and Mermin, where the Wigner Seitz cell for a BCC lattice
is already shown in the book. So, you can go and take a look at it and you will see
it is a pretty complicated three-dimensional structure.
So, the primitive cells actually become more and more complicated as the nature of the
crystal structure becomes more and more complicated. BCC is one example where you can draw it and
show it, ok, that this is your primitive cell. However, an alternative way of defining
such sort of lattices is using another way. So, you have an alternative way of working
with complicated Bravais lattices or crystal lattices in general. So, BCC is one sort of
a slightly complicated lattice where you have one point in the center of the cube and
its primitive cell is a little complex, complicated, but is there another way to analyze this structure?
So, instead of drawing a primitive cell, you can actually consider the BCC as having a
conventional unit cell. And what is the conventional unit cell? The conventional unit cell is any
cell which can be translated across the lattice to fill it up without gaps.
So, I can instead of having this sort of a lattice primitive cell, which I have shown
here, ok, instead of this primitive cell and translating it across to fill up the entire
lattice, I can also consider that the BCC unit cell is a conventional unit cell, which
is a cube, it is just this cube and I can fill up the entire space with the cube. The
only requirement is now that associated with this cube is there will be 2 lattice points
per unit cell, because a cube as I had told you earlier has only 1 lattice point per cell.
Recall that if you consider a cube, if you consider this cube and if you have spheres
at the corners of the cube, only one-eighth of each is belonging to this cube and there
are 8 such points. So, 8 into one-eighth of a sphere will give you 1 lattice point
per cell, where for a conventional cube, but a body centered has another point which is
sitting in the center, you have this additional point which is sitting in the center.
So, one point per cell comes from the corners of the cube and another point comes from the
body centered point. So, instead of describing the body centered lattice with this complicated
primitive cell, we define it with using a conventional cubic cell, but with 2 lattice
points per cell. A primitive lattice has only 1 lattice point per cell, a conventional unit
cell can have more than 1 point per cell, but it makes description of these lattices
a little easier. So, you can describe a BCC not with this primitive cell, but you can
describe it with a cubic unit cell and you can define your primitive vectors along these
3 directions with the only requirement that there are 2 points per conventional cell.
So, your conventional cell, these are the vectors a z cap, a x cap, a y cap, these are
your fundamental translation vectors and you can define the location of the 2 points
per cell, one is at 0 0 0 and the other is at a by 2, a by 2, a by 2. This is the location
of the 2 points per conventional unit cell. And if you translate this now across the entire
cell, you will make up the entire lattice. And this is an important point that often
we do not always go back to a primitive cell wherever required we do it, but sometimes
we also describe a complex lattice structure with its conventional unit cell which can
be a simple structure like a cube and associated with it are more than 1 lattice points.
So, this is as far as BCC structure is concerned, okay. And here actually it shows you very
nicely that why there are 2 points per cell, the big circle in the center or the big sphere
in the center is your lattice point and the one-eighth of each sphere is sitting at the
corners of the cube. Elements which form BCC structure, there are a large variety of elements
which I have enlisted here, okay. And this is the lattice parameters, this is the lattice
constants or the lattice parameters of those structures. And for example, barium, potassium,
sodium, rubidium and these are few examples where you can see they form a BCC structure.
So, large number of elements form a BCC structure.
Next we go to the FCC lattice, a face centered lattice. A face centered lattice is as I had
said that you have on the faces of each cube you have a lattice point along with points
which are sitting at the corners of the cube. So, you have points which are sitting on the
faces of each edge of a cube as well as on the corners of the cube. So, this is your
face centered cubic structure. For the face centered cubic structure, you can define your
primitive lattice vectors as shown here.
Apart from that, you can define it also using what I told you earlier that the face centered
cubic structure can be defined using a simple cubic unit cell. This is your conventional
unit cell also called as a unit cell. This is not the primitive unit cell. This is your
conventional unit cell which is a simple cube which is drawn here.
But now, instead of one lattice point per cell, the conventional unit cell for the face
centered cubic structure has 4 lattice points per cell. One lattice point comes from the
cube of points which are sitting at the corners of the cube and the remaining 3 come from
the edges. For example, half of this belongs to this face. Similarly, half of this belongs
to this face. So, these 2 halves make up 1 lattice point. Similarly, half from here,
half from here and half from here, half from here.
So, you will get 3 from the 6 faces, 3 lattice points from the 6 faces and 1 lattice point
which is associated with the corner of the cube. So, the FCC structure can be considered
or described with a simple cubic unit cell with lattice parameters a. And these are the
fundamental vectors. These are not the primitive vectors. These are the fundamental vectors.
Primitive vectors are shown here, okay.
But this conventional unit cell has 4 lattice points per cell. One is sitting at the origin
and the 3 are at a by 2, a by 2, 0, 0, a by 2, a by 2, a by 2, 0, a by 2. So, these are
the 3, 4 lattice points for the FCC structure. For the FCC structure, again one can define,
one knows that there are various elements which can actually form the FCC structure.
A large variety of elements can form the FCC structure. For example, the argon gas can
actually form a solid at very low temperatures and this solid is actually an FCC structure.
Aluminium is an FCC lattice, okay. And similarly, lanthanum and so on, okay. So, all these different
types of elements form a face centered cubic crystalline solid. So, this is another type
of crystalline lattice that one encounters.
Next we come to a slightly more complicated lattice and these two lattices are related
to each other, the diamond and the zinc blend crystal structure. Diamond, you already know
is made up of carbon atoms and the carbon atoms form a solid. In diamond, they form
a solid crystal structure and this is the position of the atoms in a diamond lattice
and you see it is pretty complicated, okay. The atoms are located not only at the corners
of a cube, but there is a complex distribution of these atoms inside the cube.
One way to think about this diamond lattice, which is these points which are arranged at
these locations, all these points, this is definitely not a Bravais lattice. The diamond
lattice is not a Bravais lattice, but this lattice can actually be described quite nicely
by if I consider one FCC lattice. Suppose this is an FCC lattice, where I have points
on the corners of the cube and if I displace this lattice, suppose I have two FCC lattices,
which I displace one from each other and move the second lattice with respect to the first
along the body diagonal, okay. If I displace the first along the body diagonal and place
it at a quarter distance along the body diagonal, I will get the diamond structure.
So, this diamond structure is generated by taking an FCC lattice. For example, here is
an FCC lattice shown with the blue circles, you have this FCC cubic lattice and I make
another copy of this FCC cubic lattice, which I just showed you and if I move it along this
body diagonal, which is shown in red and I place the second FCC lattice, which has these
green atoms at one quarter the distance along the body diagonal, then the lattice which
I generate is an FCC lattice. So, it is two interpenetrating FCC lattices, that is your
diamond structure.
Here I have drawn it with different colours just to identify and show you that I can make
two FCC lattices interpenetrate each other and here the diamond lattice is generated
by these two interpenetrating lattices, where the movement of the second lattice with respect
to the first is along the body diagonal and it sits at a quarter distance along the body
diagonal, okay. So, this point actually is sitting here and then you have this complex
distribution of atoms which can be nicely described by these two interpenetrating FCC
lattices.
So, this is your diamond structure. The unit cell which is your conventional unit cell
is simple cubic and you define the simple cubic with two points per lattice. For this
simple cubic cell, you will have two lattice points per cell and those two points, one
is at 000 which is this and the other one is at A by 4, A by 4, A by 4, which is this.
So, at every point you are going to put at whichever point you will go to, you have to
put two lattice points per cell and you will generate your diamond lattice.
And diamond lattice is seen for silicon, germanium. These are very important semiconductors
and apart from diamond, which is naturally from where the name the diamond lattice structure
comes from, silicon and germanium also have this diamond lattice structure, which is this
two interpenetrating FCC lattices which are displaced along the body diagonal.
