To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Namaskar. So, till now we have discussed three important circuit theorems. Those were Norton's
theorem, Thevenin's theorem and superposition theorem. So, now today we will discuss about
the maximum power transfer theorem. So, in many situation the circuit is designed to
provide the power to the load. So, rather than finding out the voltage and current we
are more concerned about the power which is being supplied to the load. So, there are
such applications such as those in communication system where it is desirable to supply maximum
power to the load. So, what we have to do? We have to address this problem of delivering
the maximum power to the load when internal losses are known for the given system.
Now one important thing which you have to keep in mind that when you see the internal
losses present in the system and if you apply maximum power transfer theorem it means that
there would be significant internal losses. How it will happen? We will discuss the maximum
power transfer theorem in detail we will understand this particular phenomena.
Now the Thevenin equivalent which we discussed in the previous classes it is basically will
be used for finding out the maximum power in a linear circuit. So, whatever the network
you have suppose if you have network which is two terminal let us say it is A and B and
you see this is linear network. So, this network can be replaced by the Thevenin's equivalent
this we have already seen when we discussed the Thevenin's theorem.
So now whatever the network we have we can represent with its equivalent Thevenin voltage
and Thevenin resistance. Now what next we have to do the terminals across which we have
just found the Thevenin equivalent we have to add the load. Now what we have to find
out that under what condition the maximum power would be supplied by this network to
the load. So, what we are assuming here is that the load is variable. So, that we can
tune the load in accordance with the maximum power transfer condition.
So now if you see the circuit which is having the Thevenin equivalent of the network and
then the variable load that is R L connected. So, what would be the power in that case power
would be I square R in this case resistance R is R L because we want to find out the power
dissipated by this resistance R L. So, the value of current would be that would be V
T H divided by sum of the resistances in the network. So, here we have R T H and R
L. So, V T H upon R T H plus R L would be the value of current I and then the square
of that is I square and then multiplied by R L would be the total value of power which
would be delivered to the load. Now if you see this particular equation V
T H and R T H is fixed because this is a network equivalent at one particular point
of time. So, for that particular instant the value of R T H and V T H will remain fixed
the only thing which is variable in this circuit is R L. So, now if you vary the value of R
L from 0 to say infinite and you measure the value of power supplied by the network
to the load then you can draw a curve which will look like as shown in this figure.
So, when you start increasing the value of R L you will see that power which is required
for this particular load is increasing and now at one particular instant the power would
be maximum and after that the value of power will again start reducing even if the value
of R L is increasing. So, from this you can understand that there is one instant at which
the maximum power would be supplied to the load and now what we have to do we have to
find out under which condition or what would be the value of this R L at which the maximum
power would be delivered by the network to the load.
So, now let us try to find out the values we have seen that the R L is changing between
0 to infinity the value which at which the maximum power occurs is R L is equal to R
T H. So, if you see this figure the maximum power transfer to the load happens at the
value of R L which is equal to R T H. So, in this particular network when the value
of R L is equal to Thevenin resistance maximum power transfer happens. How did we find? We
find with the help of the power P which we just calculated. Now let us see how we will
say that R L is equal to R T H. So, what we need to do? You know that if you want to find
out the optimality condition what you have to do? You have to differentiate the function
which is given here as P. Now P is nothing, but V T H upon R T H plus
R L square into R L. Here the constant terms are V T H and R T H the only variable is R
L. So, to prove the maximum power transfer theorem what we have to do? We have to differentiate
P which is given in this equation with respect to R L and then for finding out whether we
are reaching at maximum value or not we have to set the D P by D R L equal to 0. So, what
we have to do now? We have to differentiate the power P with respect to R L which is the
only variable in this particular equation. So, now if we differentiate D P by D R L the
value which we get is now if you see these two this particular function you can separate
it out like V T H you can take it out then you can write as R L divided by R T H plus
R L. Now to take the differentiation of this function
you can take these two as a separate functions and use the methods of differentiation for
two functions. Then what you will get? V T H square is anyway out from this function
because it is a constant value. First we will differentiate this R L. So, what will happen?
You will get only 1 upon. So, if you differentiate. So, you will get D P by D R L is nothing,
but V T H square is outside. If you differentiate this first we take with respect to R L then
you will get R T H plus R L square plus then you differentiate this. So, what you will
get? You will get anyway R L is remain same you have to differentiate this. This will
become minus 2 R L divided by R T H plus R L whole cube. So, this is what you will get
when you differentiate. Now if you rearrange this particular right
side of the equation what you can write V T H square and this you make it as a cube.
So, you will add R T H plus R L in the numerator and then minus of 2 R L. So, this is what
you get when you differentiate power P with respect to R L. Now for finding out whether
you have maximum or minimum at one particular point you have to set the value of D P by
D R L equal to 0. So, when you set this equal to 0 you get the numerator terms that is R
T H plus R L minus 2 R L is equal to 0. That means, R T H minus R L equal to 0 and finally,
you get R T H is equal to R L. This is what we discussed that at R T H equal to R L the
power would be maximum. The maximum power transfer takes place when the load resistance
is equal to Thevenin resistance. This we derived when we took the derivative of power P with
respect to R L which is variable. And now as we know that at the when the derivative
D P by D R L is equal to 0 at that condition the R L value what we get if you supply that
value R L into the power P the power might be maximum or minimum.
Now we have to find out whether the condition which we have stabilized with the help of
taking the derivative D P by D R L is really a maximum or not. So, what we have to do?
We have to double differentiate the power with respect to R L and we will prove that
it is less than 0. So, when it is less than 0 when the D 2 P by D R L 2 is less than 0
that means that the R L value which we have found when we took the derivative that is
R T H would be maximum. So, how we will find out the value of double derivative? So, D
2 P by D R L 2 we will find out with the help of the D P by D R L value that was V T H square
in bracket R T H minus R L divided by R T H plus R L cube.
So, now what we can do? We can see this as a function a and we can see this as a function
b and you can use the properties of derivatives and we can find out the value of D 2 P by
D R L 2. So, we will first differentiate b keeping a as same. So, we get this term and
then next time we keep b as it is and differentiate with respect to a. So, we get the second term.
Now if you put the value of R T H is equal to R L this term will become 0 and this term
will be nothing, but some value which is less than 0. So, with this you can say that the
condition which you stabilize that is R T H is equal to R L will give you the maximum
power transfer because the second derivative is less than 0.
So, therefore, when we substitute the value of R L is equal to R T H in the power equation
which we just calculated that is I square R L that is V T H upon R T H plus R L square
into R L and put the value of R L is equal to R T H the maximum power which the network
will transfer to the load would be V T H square divided by 4 R T H and important thing to
consider is that this value will hold valid only when R L is equal to R T H. So, when
the value is R T H value R L value is either more than R T H or less than R T H we have
to use the conventional formula of I square R L to find out the power being transferred
to the load. Now if R T H is represented as loss of the
circuit. So, what happens if you have the network like this and you are connecting load
to this external terminal A B if this network is represented as Thevenin equivalent the
value of R T H which we are seeing here is nothing, but total loss which is there in
the network and then if you connect the load R L at maximum power condition although the
load will receive maximum power from the source losses will also be maximum. So, that is why
the maximum power transfer condition will not be useful when the losses are present
in the system. So, in that case loss whatever we get in the system would be equal to whatever
power is being absorbed by the load. So, what we can say now that there is a distinct
difference between drawing maximum power from the source and delivering maximum power to
the load. Now when the load is sized such that the resistance is equal to Thevenin's
resistance of the network. So, it will receive maximum power from that network any change
in the load resistance whether it is increasing or decreasing with respect to Thevenin resistance
it will reduce the power which would be delivered to the load.
So, on the other hand we can now say that we draw the maximum power possible power from
the voltage source by drawing the maximum possible current. So, this was the condition
when we say that the source is delivering maximum power to the load. Now let us see
what is the meaning of drawing maximum power from the source. So, when you want to draw
maximum power from the source means you want to draw maximum possible current from the
source. How it will be achieved? It will be achieved simply by shorting the terminals
because only at that condition the maximum current would be delivered by the source.
So, in that case what will happen? You will effectively deliver 0 power to the load because
in that case the R value is 0 because you have short circuited the terminals. So, you
can now understand that there is a distinct difference between drawing maximum power and
delivering maximum power to the load. So, maximum power transfer theorem is applicable
when you say that source is delivering maximum power to the load. When we say drawing maximum
power it means that at that condition you are simply shorting the source terminals and
maximizing the current output from the source. Now another important thing which you have
to keep in mind that maximum power theorem is sometimes misinterpreted. What happens
that generally we design the maximum power transfer theorem to select the optimal load
in order to maximize the power absorption. But if the load is fixed that means if the
load resistance is already specified then maximum power theorem will not be able to
help. Why? Because since you have fixed the value of load that is your R L is now fixed
rather than the variable component. So, your R T H is anyway driven by the network
components. So, your V T H and R T H is already fixed. If R L is also fixed you cannot find
the maximum power transfer condition. So, in that way if the load resistance is already
specified the maximum power transfer theorem will not hold. Now suppose by any chance if
you make R T H as a variable. So, in that case the Thevenin equivalent resistance of
the network when you want to set equal to load it will not always guarantee the maximum
power transfer condition because what happens in practical situation the network will have
some loss components also. So, because of the available loss components
we have the power loss in those components and in that case the circuit which you see
as a Thevenin equivalent will not be able to help in identifying the maximum power condition
why because there would be one component which is always be a loss component and that component
will not give you the condition under which you have the R T H equal to R L. So, that
is something which you have to keep in mind that in practical scenario you always have
to see whether there is a power loss in the circuit or not.
Now let us understand the maximum power transfer theorem with the help of one example. So,
we have the circuit given in the figure. Now we have to find the maximum power transfer
at what value of R L we get the maximum power transfer. So, what is the first step? The
first step would be to find the Thevenin equivalent of this circuit which is left to the terminals
A B. So, for that what you have to do? You have to first short circuit the voltage source
and open circuit the current source. So, that you can find out the value of Thevenin
resistance. So, now if you see this circuit when you short circuit the voltage source
open circuit the current source 6 ohm resistance would be in parallel with 12 ohm and these
3 ohm and 2 ohm resistance would be in series. So, what would be the value of R T H will
be simply 2 plus 3 plus 6 in parallel with 12. So, when you simplify you will get the
value of R T H as 9 ohm. Now next task is to find the value of V T H that is Thevenin
voltage. Now when you see the circuit by keeping the sources back to the circuit you will see
there would be 2 meshes in the circuit. So, let us say I 1 is the mesh current in
mesh 1 I 2 is the mesh current in mesh 2 and voltage across terminals A B is V T H. Now
in that case if you see the circuit I 2 would be simply minus of 2 ampere because I 2 is
opposite to the direction of 2 ampere current source. So, you can simply say that I 2 is
nothing but minus of 2 ampere. Now if you write the KVL for this particular
mesh what you will write you will write minus 12 because you are going from minus to plus
then plus of 6 plus 12 that is 18 into I 1 minus of 12 I 2 because in this case I 2 and
I 1 are in opposite direction. So, what you get minus 12 plus 18 I 1 minus of 12 I 2 equal
to 0. You have to just simply put the value of I 2 which you just figured out from second
mesh if you put the value of I 2 into first equation and simplify what you will get you
will get I 1 is nothing but minus of 2 by 3 ampere.
Now what next you have to do you have to just see from the figure that V T H is nothing
but the voltage across the current source because there would be no current flowing
in 2 ohm resistor because it is open circuit. So, voltage V T H would be across the current
source. So, what you can write in this case if you apply KVL to this particular segment
you can simply write that is 12 minus V T H equal to the drop against these 2 resistances.
So, drop across 6 ohm would be 6 into I 1 plus 3 ohm into I 2. So, this is the drop
I 2. So, what you get from here 12 minus V T H is nothing but 6 into I 1 would be nothing
but minus 4 plus 3 into I 2. What is the value of I 2? I 2 is minus of 2 ampere. So, this
will again become minus 6. So, what V T H value you get? You get the value of V T H
is nothing but 22 volt. So, now you have got the value of V T H and you have the value
of R T H as 9 ohm. So, your equivalent Thevenin equivalent of the circuit would be like 22
volt in series with 9 ohm resistance and then you have connected an unknown load that is
R L. Now, using maximum power transfer theorem
what you can say? The maximum power will be transferred only when the 9 ohm resistance
is equal to the load that is R L. So, under maximum power transfer condition 9 ohm would
be the value of load R L. So, in that case what would be the maximum power transfer?
If you see P max, P max is nothing but V T H square upon 4 R L. So, what you have to
do? Simply put the value of V T H as 22 divided by 4 into 9 which you have just got and when
you calculate you will get the value of maximum power supplied to the load R L is nothing
but 13.44 watt. So, with this let us conclude the today's session. We will continue our
discussion on maximum power transfer theorem in next class also where we will discuss that
in case the dependent source is available in the circuit how you will calculate the
maximum power which would be transferred to the load.
Thank you.