noc18-mm20 Lecture 35-Ternary phase diagram(Cont...)

IIT Kanpur July 201
20 followers
Dec 3, 2023
So, good morning, welcome again to this new lecture on phase equilibria. So, we are in
35th lecture today. So, I am just going to give you a brief recap of past lecture. So,
as far as recap is concerned, we discussed, we started discussing about the ternary phase
diagrams. Ternary phase diagrams are basically three dimensional phase diagrams which have
three components. So, it could be three elements or three compounds which make you know binaries
between each other like if you have a, b, c, three components, then you will have basically
it is a mixture of three binaries a, b, b, c and a, c and these three binaries when they
are put together. So, you might have a situation like this. So, this is first binary, this
is second binary, on the back you have third binary. So, you have a, b and c. So, these
are composition axis and on the y axis you have temperature and. So, you can have for
example, one phase diagram here, let us say this is isomorphous between b and c, this
is another isomorphous between let us say b and. So, this is isomorphous between a and
b on the left, on the back you have isomorphous between b and c, on the front you have isomorphous
between let us say between a and c and on the top of it you will have a surface which
is. So, this surface on the top this is the liquidus surface whereas, at the bottom you
have this one if you connect these together this is the solidus surface. So, you have
three dimensional surface. So, you have a surface basically giving you it is a contoured
curved surface which will be a liquidus and in a similar fashion at lower temperatures
you will have another surface which will be curved in this fashion and that will be solidus,
I mean they might also touch each other somewhere in between either giving you a maxima or minima
depending upon the phase diagram, but for a simple isomorphous system you may have one
surface one curved surface giving you liquidus another curved surface will give you solidus.
So, this will be liquidus and the one here will be solidus. So, it is a three dimensional
phase diagram a ternary system and basically you draw it in the fashion of equilateral
triangles, we saw how to determine the composition. So, for that we saw that if you have a b c
then if you draw a horizontal line to b c then this line will give you composition of
a similarly if you draw a horizontal line parallel to a b it will give you composition
of c similarly if you draw a horizontal line parallel to a c it will give you composition
of b and remember x a plus x b plus x c should be equal to 1 there is another method that
can be drawn as that is the altitude method which means altitude of a equilateral triangle.
So, if you have a altitude you can take the altitude for example, this is the altitude
and this altitude is sum of this that and another. So, these are three altitudes which
can which you can take to be. So, these three altitudes will be equal to the overall altitude
of the equilateral triangle and they will also represent compositions. So, nevertheless
x a plus x b plus x c must be equal to 1. So, the corners represent the pure materials
the sides represent the binary systems and somewhere anywhere in between the triangle
you have a ternary system. So, and we looked at basically we are looking
at certain rules the first rule that we looked was if you take a line for instance here in
this case and if I draw a line like this and let us say if this is a b c and along this
line the composition of a remains the fraction of b and c remains the same you can vary the
composition of a along this line, but. So, as you move further away you will increase
decrease the amount of a, but the fraction the ratio of b and c remains the same. So,
that was the first thing that we discussed then we discussed that if you have this line
for example, if you draw another line like this and since this line is parallel to b
c along this line the a if you if you move the alloy along this line anywhere you will
change the proportion of b and c, but you will maintain the constant amount of a and
then we looked at the third rule that was the lever rule and. So, if you have if you
have a. So, this is for instance a b and c and if you mix 2 alloys let us say a and b
then the third alloy which forms as a result of the resulting alloy let us say c is the
it falls on a tie line which is it joins a and b. So, it is a straight line joining a
and b in between depending upon the proportion of a and b you will have c line and this percentage
of for example, your b phase will be equal to a c divided by a b into 100 and percentage
of a will be equal to b c divided by a b into 100. So, this is nothing, but lever rule
that we saw in practice all right. Now, now let us move on to another few more
aspects. So, we will first go to rule number rule number 4 says that if you have 3 alloy
if one mixes 3 alloys let us say you know x, y, z together the composition of the resulting
mixture will be at let us say in this case. So, if I draw a triangle fashion ok. So, this
is the prediction that you have and let us say you have a alloy somewhere you have y
and somewhere you have z and if you mix them together you form you make a triangle by connecting
these 2 and the alloy that forms let us say lie somewhere here let us say this is a point
t such that when you draw let us say projections. So, this is let us say x prime this is y prime
and this is z prime. So, basically the resultant alloy the composition of the resultant mixture
will be at a point let us say t in a triangle a b sorry x, y, z formed by joining the compositions
of the alloys and you draw the straight lines they are not curved lines. So, it is as if
you know it is at the center of the gravity. So, it is like point fulcrum at you have you
have a body whose fulcrum lies at t and it has you know some mass attached at its corners
like x, y, z and which basically represent the alloy compositions.
So, under equilibrium conditions the percentage x is equal to x 1 t divided by x x 1 into
100 similarly percentage y is equal to y 1 t divided by y y 1 into 100 and percentage
z is equal to z 1 t divided by z z 1 into 100. So, this is all coming from basically
properties of the triangles. So, generally in 3 by ternary system we do not look at the
3D diagram we are mainly looking at various sections isothermal sections vertical sections
and so on and so forth and when you put these sections together. So, you can have a if you
draw a ternary phase diagram for example, like this. So, the sections could be you know
horizontal section like this. So, this would be isothermal section because you have t here
and a b c's are here. So, this is the isothermal section you can have vertical section. So,
for example, you can have a section like this is a vertical section you can have another
vertical section like this for instance. So, there are various vertical sections which
are possible. So, if you by looking at these various sections you can understand ternary
diagrams a little better. So, these sections are for instance you can
have liquidus plots now liquidus plots plots as I just explained to you. So, if you draw
let us say a ternary phase diagram right. So, you have let us say one part of the phase
diagram is this. So, this is let us say a b c another part of the phase diagram is something
like this and this is the b c part of the phase diagram which is like right. So, the
you can see that this is liquidus this is liquidus this is liquidus and this is solidus
solidus solidus when you connect liquidus together. So, this surface the top surface
consisting of liquidus. So, this surface on the top this will be essentially the liquidus
surface this liquidus can be projected on to a surface. So, for example, if you have
a system such as the one which I am going to draw with little complex. So, let us say
a surface like this. So, basically what you can do is that this surface can be represented
by let us say these lines these lines are nothing, but constant temperature lines. So,
you draw constant temperature lines on this surface. So, generally it will start from
one end. So, when draw these constant temperature lines you can project them in 2D. So, and
these would be the for example, lines. So, depending upon the melting points. So, let
us say if c has the highest melting point and b as lowest melting point. So, this would
be T 1, T 2, T 3, T 4, T 5, T 6, T 7, T 8, T 9, T 10, T 11. So, this is basically by
picking up the constant temperature lines on the surface you are projecting them on
the 2D plane. So, this is what is the liquidus plot. So, it allows you to visualize the liquidus.
Similarly, you can draw a section at you can do the solidus you can do the same for the
solidus as well. So, you can have a liquidus plot like this you can have a complex phase
diagram for example, let me draw a little bit longer lines here. So, let us say we have
a phase diagram which is let me see. So, if you have and let us say this touches somewhere
here. So, you have a similarly for this side you can draw another eutectic phase diagram.
Similarly, on this side you can draw another phase diagram this is a eutectic. So, connect
this line. So, let us say. So, these are the corners are a, b and c and you see 3 ternary
diagrams one between a, b second between b, c and third between a, c. Now, on this ternary
diagram if I connect the points lying. So, this is the these are the melting points of
a, b and c and if I connect only the liquidus lines. So, this is liquidus use this color
liquidus let me use different color. So, this is liquidus this is liquidus this is liquidus
this is liquidus and this is liquidus and these eutectics will meet somewhere here and
this will form let us say a ternary eutectic. So, this surface which is shown on the top
is essentially the surface that represents a liquidus surface of a ternary eutectic.
So, on this you can draw isotherm constant temperature contours and when you project
them in 2D. So, let us say this is a, b, c eutectic thing. So, now you can start. So,
this has. So, if the previous case it was like this there was no nothing very complicated
there you just draw a constant temperature lines on a 2D diagram and they just show the
temperature profile. So, this is the profile of the surface in this case since you have
a ternary eutectic somewhere in the middle there is a dip in the middle. So, what happens
is that you draw the isothermal lines. So, they say this is how you draw and that is
how they start merging into each other. So, somewhere in between you will have a eutectic
somewhere. So, these lines they basically merge towards each other to form let us say
eutectic. So, various lines merge towards to form give you a eutectic. So, this is for
the sake of it let us say this is 400, 300, 200 this could be for example, 500, 400,
350, 300 and you know 200 or this could be for example, 650, 500, 550, 400, 200 and so
and this will be the all the 3 lines merge to the contours merge to give rise to a ternary
eutectic point somewhere in the middle draw it slightly more clearly basically.
So, you have essentially you have the temperature lines coming from A side temperature lines
coming from the C side temperature lines coming from the B side the contours and these contours
merge together somewhere in the center to give you a ternary eutectic point. So, this
is how your liquidus of ternary eutectic will. So, this is percentage A percentage B on this
you will have percentage C this will be percentage A. So, this is this basically useful to determine
for example, the freezing point of the alloy. So, you can see that if the eutectic falls
here you know that this is the minimum temperature that you will have in a ternary eutectic system
and this is the minimum freezing point of the alloy and this also helps with identifying
the primary phases that form during solidification in a ternary alloy at a given.
So, the next thing that we do is to basically look at the isothermal plots basically these
are plots drawn at constant temperature. So, and these are useful for predicting various
phases useful to determine the phase and their amounts compositions etc. So, you can
have for instance situation like this in which. So, if I take a cross section in the previous
diagram at a lower temperature. So, in this let us say if I take a diagram somewhere at
this point. So, let us say this is the T 1 then what I will see is that if I project
it in 2 d yes if I take it in 2 d what I see is that. So, this is A B and C. So, you can
have a line of A something like this line of B something like this and line of C something
like this. So, this would be for example, gamma phase field this would be beta phase
field this will be alpha phase field between these 2 you will have alpha plus beta alpha
plus gamma beta plus gamma and then you will have alpha plus beta plus gamma the 3 phase
field and hence and you can vary the compositions in this direction. So, this would be A this
would be C this would be A this would be B C this would be B. So, this is how you draw
the isothermal plots. So, they are drawn at a constant temperature taking a section and
this allows you to determine. So, for example, if you draw in a isomorphous system in a isomorphous
system at low temperature you will see only alpha phase. So, this is isomorphous completely
miscible system if you go to high temperature you will see only liquid at lower temperatures
you might see liquid and solid. So, that depends. So, these are isothermal plots and then we
determine another thing which is called as iso isopleths are basically vertical sections
which depict phases at various temperature. So, for example, if you have again if I go.
So, if I draw now let us say phase diagram and let us say. So, this is A B C. So, you
have liquid and this is liquid plus solid liquid plus solid and liquid here you have
solid and on top you have liquid. So, let us say if I draw a section which is something
like that. So, essentially I create a vertical line like this and I take a section which
is path. So, let us say I take a section like this. So, I can see that this is the section
that I am drawing all right and you can see that if you now project this in 2 D. So, you
can see that you are going. So, this is a section you started from pure B and you go
on to some A by C ratio some A by C ratio and you can see the phase field varies. So,
as this is the temperature axis you can see that somewhere here you have starting from
liquid plus solid and then you go to this regime. So, you have a phase diagram which
shows liquid the liquid plus solid you might have a situation in which something like this
let us say. So, you have sorry not very neat I have a situation something like. So, in
this phase you have. So, you have completely solid regime here something like that. So,
you have liquid you have liquid plus solid then you have solid. So, something like this
you may encounter if you want to see something in the binary phase diagram in the binary
phase diagram it may appear let us say something like this. So, you have let us say A some
let us say 30% of C and this point is B 40% of C. So, let us say if we go to section in
this diagram ok. So, we go through a section like this ok. So, this is a section and if
you raise this section take a vertical section and draw it. If you take a vertical section
and draw it you might see something like this. So, let us say you have a alpha something
like this let us say the phase boundaries may not actually in these things isopleths
are not actually phase diagrams they are not complete phase diagram they are only sections.
So, as a result you will see phase boundaries doing all sorts of funny things they may not
complete the. So, this is L L plus beta L plus beta plus gamma this is beta plus gamma
this is alpha plus beta plus gamma this is let us say L plus alpha this is L plus alpha
plus gamma and this is alpha plus gamma. So, you can see this is the vertical section starting
from A alloy containing A 30% of C and B 40% of C and this is how it will vary and somewhere
in between it will have certain composition which shows a minimum point transforming from
liquid. So, this is the eutectic composition of ternary showing you a minimum melting point.
So, these are the isopleths which basically depict the change in phase type as the temperature
changes for a fixed A and B ratio. So, these are certain characteristics of ternary phase
diagrams that we have discussed. These characteristics allow you to depict ternary phase diagrams
and imagine phase diagrams in a better sense and a better way and they allow you to study
the microstructure evolution phases their compositions etcetera in a more meaningful
manner. So, we will do further discussion on ternary phase diagrams in the next lecture.
Thank you.
