noc19-ch17-lec30

IIT Kanpur July 201
20 followers
Dec 3, 2023
In this lecture we will discuss the introduction and basic concepts of equation of state
Welcome, back in today's lecture we are going to start a new topic, it is on Equation
of State or in general intermolecular forces and the type of models we often use in explaining
thermodynamic behavior. So, when it comes to equation of state it simply means relating
the pressure volume and temperature in some empirical fashion. So, we can write something
like this. So, essentially a function which relates this variables is nothing but equation
of state is useful in modeling. So, useful in modeling let us say vapor liquid equilibria
or liquid-liquid equilibria. So, this becomes a very valuable set of equation sometimes.
The other thing which it can do is it can also avoid writing properties in tables and
interpolations we often use in case we are using tables. So, it can avoid that. So, thus
a equation of state becomes very useful. One can also write in explicit P or V by writing
P as a function of T and V. The classic example or most common equation of state is ideal
gas which is nothing but P is equal to R T by V ok. So, here this particular equation
is derived from kinetic theory of gas and one of the important assumption of ideal gas
is that it does not occupy any volume. It does not have any specific volume and that
means, the particles can pass through each other without filling each other. So, it has
no intermolecular forces except for except when they collide with the container of the
wall. So, walls of the container. So, in other word it has velocity. So, essentially in the
case of the ideal gas, the molecules have 0 volume or no volume and it has no intermolecular
forces and the energy the internal energy is nothing but the kinetic energy ok.
Typically internal energy will be kinetic energy plus potential energy. Since potential
energy is 0, so it is kinetic energy and thus you have only function of temperature. So,
this kinetic energy velocity is directly related to temperature from you know using
this Maxwell Boltzmann statistics one can show that. So, they are directly related to
temperature via Maxwell Boltzmann statistics ok. So, from this definition it is very clear
that there is no intermolecular forces. So, essentially the pressure is directly related
to the to the overall volume of the container and hence one can also show that when pressure
goes to 0 ok, all gases turns towards ideal gas ok. One can derive this expression using
statistical mechanics and as well, but we would not go into those directions ok.
So, kinetic energy in this case is gets contributions from the translation, rotation and vibration
of the molecules ok, whereas potential energy is nothing but relative position of the atom
in the space. So, but in the case of ideal gas of course, there is no meaning because
it does not have any attractions. But now let us look at the potential energy.
So, potential energy or the intermolecular forces or interaction how does it arise ok. So,
most of the atoms in general have this nature where you have this positive nucleus and essentially
the electrons are negatively charged around it. So, the nature of atoms is electrical or there
is a electrical nature of atoms and this results to potential energy or in general this results to
the intermolecular interactions ok. So, when they are close by it adds to those kind of interactions.
So, often you can apply for such a electrical nature the concept electric field. So,
let us assume that you have a charge Q and electric field is E, then this essentially
is nothing but the force or in other word I can write electric field as F by Q and F
is nothing but the gradient of the potential energy by Q ok. So, this is nothing but electrical
forces. So, essentially F is minus delta minus you know minus gradient of gamma,
gamma is our the potential energy ok. So, this is the kind of force which we can now try to
derive it and this kind of expression or this kind of electrical force this results from the
net charge of the ions and permanent charge separation in a neutral species. So, you can
consider net charges they are very few examples of specific point charges systems, but we will
take that in order to illustrate this intermolecular forces. So, as I was saying that
electrical forces results from net charges of ions and also from permanent charge separation
in neutral species ok. So, let us consider an example here. So, let us consider this as a
positive charge ion with Q of i and this is again let us say a positive charge ion Q of j ok.
And we have also this distance between the ions are if the size of this let us say sigma if r is
much much greater than the radius of the ion radius of i which is in this case could be sigma
let us say then we can say that this is point charge ok. So, let me write it down now F of i
and j ok, this is the force on i due to j is nothing, but Q of i Q of j divided by r square.
Now, this is in a CGS unit ok, if it is an SI unit you have to divide this by 4 pi epsilon 0
Q j Q i Q i Q j r square this would be an SI unit where this is nothing,
but permittivity of free space ok. Now, one can find out the potential energy by taking
the minus integral of j dr this is Q 1 Q 2 by r again in a CGS unit. So, this is a by simple for
the case of this point charges. Now, as I said the effect here is due to the kind of electrical
nature and because of that you have this kind of forces and a potential energy. So, that means,
that this charges would emanate or would have an electric field around themselves.
One can also draw schematically the kind of electric field lines for such kind of point
charges. So, this is your positive Q and from for the case of the positive charge the electric
lines will originate from this ok. So, this is your E for the case of for the case of a negative
charge minus Q the electric line will be towards itself. So, this is how the electric line would
be ok. Now, as I said the point charges are rare, rare, but there are of course, examples. So,
molecular example would be your NaCl ok. So, NaCl is nothing, but ionic liquid or sorry ionic
solid and it is made of positive and negative charge ions within a crystal lattice. So,
it is made up of Na plus and Cl minus they are on the lattice ok and thus creating a solid
structure where these ions are placed overall the system is neutral, but they consist of Na
plus and Cl minus and because of this positive and negative charge there is a strong bond energy due
to attractive forces of a positive oppositely charged particle or charge ion in this case ok.
Ok. So, in addition to this you will have ions floating around in a kind of a liquid solution
that is called sometimes electrolyte ok. So, here the example could be let us say
S 2 O 4 acid bath ok. So, here is a net charge exist in the liquid phase in electrolyte solution
and molten salt. So, in the case particular case of S 2 SO 4 you will have H plus and SO 4 2 minus
will exert columbic forces ok. Now, it is in the water and hence the polar water polar water will
try to screen will try to screen the electrostatic cloud or let me first write down here the polar
water will allow this ions to be stable ok. So, because of the nature of the polar the
polar structure of the water ok. So, the nature of the water is that it will try to form an
electric electrostatic cloud that shields the ions from one another. So, what it does it creates
electrostatic cloud to shield the ions from each other and thus creates a stability of
this ions in this solution phase ok. So, this is a typical electrolyte solutions
where the screening effect is dominant and that is why even though is a strong ion,
but since the solution itself is contains a solvent which is a polar in nature which
helps the system to be to become stabilized by this mechanism of electrostatic cloud screening
effects or shielding effect ok shielding effect ok. So, in addition to this electrolyte you will
have other kind of systems such as ionized gas and plasma ok. So, this you might find it in
earth's ionosphere, but in addition this plasmas are also used in the etching and as well as
deposition of thin films in integrated circuit manufacturing ok. So, this is a typical ionized
form the system, but most of the cases when we are going to deal with the molecules they will
be neutral in nature and even though they are neutral in nature they will impart electrostatic
interactions they will have a dipoles may not be a permanent dipole could be a instantaneous
dipole and something which will lead to this intermolecular interactions and this is something
which now we are going to discuss a bit to provide little bit of clarity of different
types of interactions which we have in such kind of molecules.
So, there could be a electrical dipole ok even though for neutral molecules ok. For example,
water if even there is neutral will is does have a dipole moment. So, how do you define that?
Essentially you have molecules with overall charge separation ok. So, it is neutral,
but it is charge separation. So, let us say if this is a molecule here. So, this is a minus q
and this is a plus q. So, it is a neutral, but the charges are separated over the its volume and
the distance here could be L ok the dipole moment we defined by this sign from negative to positive
mu and mu is nothing, but q dot L ok the unit of this is Debye. So, if you look at the electric
field this will also have electric field, but now it is a it can be shown that I can draw this as
something like this. Let us say I can I can draw it here plus q separate minus q separate here and
this will have something like this electric field around itself ok. So, this will be the electric
field ok for such a neutral molecules where the charges are separated.
Let us take an example of HCl which is strong electronegatively charge you know which is like
acid and in this case you have the Cl which is electronegative ok. So, in this case I can write
something like this H plus and Cl minus right. So, you will have in the similar sense this kinds
of electric field. Now for the case of HCl there would be covalent bond which are formed between
the valence electron ok. And this is because of the fact that chlorine gains electron density
at the expense of H because chlorine is more electronegative ok. So, it pulls the electron
from the hydrogen ok. So, covalent bond is formed between the valence electron and this is this
happens because of the bond formation between the between one electron of hydrogen and chlorine of
one electron of chlorine or so that means the bond is formed by sharing.
So, would so it is not just between this by sharing ok one electron of H and one
electron of chlorine ok. So, as I said the chlorine is a high electronegative ok. So,
it pulls the electron from H ok. So, which clearly means that even if it pulls ok which
means that essentially what happens that electron is not shared equally which means
electron is not shared equally and thus it can create a kind of a net charge separation ok.
Such that Cl obtain a net negative charge and H obtains a net positive charge ok. So,
this is how you are going to see that for the case of HCl. Now if you can extend this
exercise for polyatomic molecules. So, one can one can generalize this behavior by saying that
there will be dipole moment if if there is a non-symmetric distribution of the charges.
That mean mu exist due to non-symmetric distribution of electron cloud ok. So,
let us consider now two molecules with dipole moments and hence there would be not just a charge
charge interactions, but it will be between dipole dipole interactions. So, so dipole dipole
interactions. So, earlier we looked into charge charge interaction for the point charges now we
are looking at dipole dipole interactions. For this there could be a many orientations
of the molecules which will play a role. So, let us just draw one. So, I am just saying
this is a charge separation with positive and negative and hence there is a dipole moment
and the other could be something other molecule could be something like this ok.
Or you could have something like this ok this would of course, be repulsive in nature ok this
could be and this would be your attractive in nature right. So, there could be many
configurations as you can see and these all configurations of the molecules would lead to
kind of a different energies and thus this configuration effectively need this energy
effectively need to be average over the various different possible conformations ok.
So, for example, if in the case of a simple or generalized kind of arrangement where let us say
you have this molecules then center of mass is here and this another one is like this ok and I
can draw a kind of axis where the dipole moment the angle with respect to dipole moment here is
something or this axis can something like theta i. Similarly for this again dipole moment here
is negative to positive is again theta j and in addition then may not be on the plane ok they
may be in a in a different plane. So, essentially you have to look at also the angle kind of phi i
and phi j is a similar notion as in the dihedral angle. So, you have to see whether they are kind
of rotated by theta phi out of plane and in that case this will be let us say theta i phi i and
other one is phi j and given this kind of information you should be able to find out
effectively the energy between i and j you can show that that this can be written as simple like
this ok cos phi i minus phi j. Now this something which we can derive it I am not expecting that to
you to derive here, but just to tell you that if you have this kind of configuration you can
consider this to be a point charge of course q there is a specific length of this from positive
to negative to positive and you know this distance r ok from this point to this point.
So, you can find out the point charges here considering the point charges interactions
with this and as well as this and similarly for others and one can do this rearrangement
in a in a mathematically and you can show this kind of expression ok and this is for just one
expression there will be for others. So, essentially one can average this kind of
interaction ok and one can show that this is minus 2 by 3 mu 1 square mu mu i square mu j
square by 6. So, this is still in the CGS unit remember that otherwise you have to bring the
permittivity part. So, this kind of interaction between the dipole-dipole ok is one of the very
prominent contribution towards the Van der Waal interaction ok.
Now, this had a permanent dipole remember this is nothing, but a permanent dipole. So,
it is like a permanent dipole-dipole interaction, but there could be other cases where you could
have one molecule permanent dipole and other molecule which does not have any specific dipole
ok, but because of the polarizability that mean it can change the electronic cloud ok. So,
it can have some kind of displacement and leading to the charge redistribution creating a dipole
moment. So, that is visible. So, in that case you can have a induced dipole. So,
this is another important contribution and this comes from the fact that permanent dipole,
let us say this is a permanent dipole ok. So, this is a permanent dipole ok and there will
be of course, electric field ok and around itself ok. So, and then if the another molecule comes ok,
such that this permanent dipole induces the effect or distributed the electronic cloud in
such a way that due to the charge distribution, now it has net effective charge separation
creating a induced dipole ok and this is a electric field let us say E of j.
So, mu i induced ok. So, this is i and this is j is nothing, but alpha times E of j. So,
the induced dipole is nothing, but the proportional to the electric field provided by the permanent
dipole ok. Now, with this you have now kind of again a dipole-dipole interactions ok. Now,
the mu i or the strength of the mu i depends on of course, alpha ok. So,
alpha is something called polarizability which is nothing, but ease with which molecular cloud
can be displaced by an electric field ok. So, if you think from this point of view that here is
your nucleus, here is a electron, how easy you can how easily this can be displaced depends on
lambda. So, larger the alpha value. So, how easily we can displace the electron depends on this alpha
value. The larger alpha means easy to displace or remove ok. So, usually for larger atoms,
we have alpha is large ok. So, larger usually large alpha for larger atoms ok. So, and usually
alpha is additive which means that for the case of molecules, if the number of atoms increases
and hence alpha should also increase ok. Therefore, it scales alpha scales with the
number of atoms. So, molecules larger molecules will have larger value of alpha and hence they
have this tendency to have this induced dipole moment in the presence of electric field creating
this induction phenomena which we call. So, this phenomena which we just described ok,
where a permanent dipole moment molecules ok or an atom I induces induced dipole in J ok,
leading to attraction between I and J ok, this is called induction ok. And basically this is
nothing but induction force. The force which is coming up is induction force. This should be
induction forces. So, as far as this potential energy form is concerned, it is going to be same
as this ok, instead of mu J is going to be mu J induced ok. So, we just talked about point point
charges, dipole dipole charges and then as well as inductions. The last part is the one where we
do not have a permanent dipole ok, but the fluctuation in the electronic motions ok,
the electronic clouds can have fluctuations and that fluctuations in the electronic nature of the
cloud creates a momentarily kind of dipole moment. So, over the time of course, the dipole moment is
going to be 0, but for momentarily it can have a dipole moment and that itself can have an
electric field creating an induced dipole in the other words. So, it is a common in many many
molecules where this is the particles may not have a permanent dipole, but you still have this kind
of interactions which are called dispersion forces or dispersion interactions. And if this is something
which was first found by London and this is why we call also London forces or interactions.
So, as I saying that the fluctuation produces a transitory dipole ok. So,
it is like this again if you have a transitory dipole because of fluctuation you have a dipole
moment and then you have this electric field creating induced dipole in molecule 2 ok. Now,
this fluctuations something which depends on ionization potential. So,
if you the corresponding energy for such a dispersion interactions can be written as
follows is minus 3 by 2 alpha 1 alpha 2 again is alpha is nothing but polarizability ok.
And this is R square h nu 0 for 1 h nu 0 for 2 h nu 0 1 plus h nu 0 2 ok. So,
this is basically nothing but for 1 and 2 ok. Now, this is proportional approximated
to this ionization potential ok. Now, h here is Planck constant nu is nu 0 here ok is the
characteristic frequency electronic frequency of molecule in unexcited state. And I of course,
is this which is not the is a nothing but the energy required is called ionization ok is a
first ionization potential I 1 is energy required for something like this m goes to m plus plus
electron ok. So, this is the 3 interactions we observed beside the point charges is the following.
So, you have dipole-dipole dipole-dipole, then you have induced permanent dipole and induced ok,
then you have this dispersion. Now, this 3 term or 3 contributions are part of Van der Waal
interactions ok. And if you carefully see all the 3 on an average can be written as C of 6 R 6 ok.
So, that means, this interactions Van der Waal interactions whether is a dipole-dipole dipole
induced or dispersion interactions are proportional to 1 by R to the power 6 is also negative and this
is of course, the strength of attractive forces. So, ok. Now, before I close what you can do is
you can also look at the test book Kerosky the book in this course and try to solve some examples
ok which is 4.1 to 4.3 this will further add to the understanding of what I just covered ok.
So, with this I will stop today's class and I will continue this exercise particularly relate
to the models which often we use and the corresponding state principle in the next class.
