noc20-ce19-lec17

IIT Kanpur July 201
20 followers
Dec 3, 2023
[Music]
[Music]
so welcome back so in previous lecture
we discussed about the the forecasting
and prediction of earthquake and the
there were few successes which were been
achieved in prediction our forecasting
the earthquake one was the 1975 -
earthquake of China and there was
another one from Himalayas so today we
will discuss about this and we will move
further in this lecture so as we
discussed in the previous one that tree
there is a nuisance of the large
magnitude earthquake greater than or
equal to seven point five between the
period from 1953 to 2001 so an early
case are for recurrence interval the
other studies which were been taken up
in the areas like the affected area by a
longer earthquake which was in 1897 but
magnitude eight point seven the group
from national geophysical research
institute in GRI non-doctor tsuki Jia
and his team have reported the result of
Palio liquefaction so these are the
secondary effects which which will
always get preserved in the sediments
and this is because it is related to
Strong's
ground shaking so the the found the
evidence and the the periodicity of the
large prehistoric earthquake in this
region and based on the radiocarbon ages
of collected the radio cam the in the
charcoals collected from different units
which were been deformed due to the
liquefaction process what they suggested
was that
and the recurrence interval and this
region is almost like 400 to 600 years
so this study was been done in the area
of not East India in Himalayan region a
modern magnitude earthquake forecast was
been done and this was been 1988 this
was been done in 1988 so the global
effort towards establishing the
precursory pattern that proceeded major
and great earthquake so this is what was
been taken into consideration for the
hygiene earthquake also that the
precursor events who have been
considered for predicting the the
preceding major events so a swamp or how
the crewson's preceding major earthquake
also is an indicative of not so either
there is number of earthquakes in large
number of forth weeks I have started
occurring and in particular region or
there is an christens there is no
earthquake which has been recorded since
last 100 years or 50 years or so those
areas are the areas which will be
hosting the largeman magnitude
earthquake so considering this either it
is an SRAM or the the period of
questions and taking and into
consideration the process of precursory
events similar exercise was carried out
by Gupta and Singh in 1986 and 1989 in
the vicinity of Indo Burma border now
based on this August 1988 earthquake was
rain predicted so what is the the
northeast portion of India where the
previous record it suggested not there
was an earthquake in 1897
and then another one was here in my
in 50 and few more which have been
listed here 1947 1905 1931 and all that
so in this region the this was been
predicted the earthquake was been
predicted
so Gupta and Singh in 1986 discovered
one such region shown in the image this
is one aside and predicted an earthquake
that may occur at any time from then
onwards okay so they they suggested that
during their studies and carried out in
1986 so after this any time there will
be an earthquake in this region now what
they also suggested that this was this
was definitely based on the precursor
events see they emphasize not this event
and that should they predicted
earthquake does not occur till the end
of 1990 then this forecast could be
considered as an false alarm okay so
this uncertainty always remains with the
with the observations or with the with
the studies which are or the
investigation which are carried out
considering the the precursor events but
at least if there is an the forecast
based on such studies will alert the
people in the local area or the
respective areas where this such
predictions are been done and
precautionary measures can be taken up
well in advance okay if it is false
alarm it is well and good but if it
occurs then we are towards the safer
side so however it turned out a true
alarm and there was an earthquake which
occurred in on the the forecast was this
one and the occurrence is over here so
what they they suggested that this will
be the the region where the earthquake
will occur and the magnitude will be
around 8 plus minus
five mochi 0.5 so but the earthquake
occurred in this area as compared to
what was then given the region here
which was pretty much within the predict
grade
area okay if you couldn't see this one
here it lies very much close to this one
okay so it was it occurred within that
and the depth also was been predicted
that the depth world will be around 100
kilometers around the surface and the
depth was 90 kilometers which was me and
time which was been given was between
like from 1986 and December 1986 with my
and the earthquake occurred in 1988 on
August 6th so this was again and another
successful achievement which was was
been done based on the precursor event
now earthquake focus and hypocenter so
wherever there is a maximum amount of
energy is been released that at a
particular point that is termed as your
focus on the fault plane and the the
exactly the location on the surface has
been termed as epicenter and the
displacement which has been observed on
the surface if there is a displacement
coming right up to the surface than the
the deform surface has been that
manifestation of the deformation has
been termed as false curve and and the
line here along which didn't moment has
taken places the fault line so this will
be the fault plane this will be your
fault line and the may be the displaced
surface is your false Cup so the the
energy where it has been released the
stored energy our depth is termed as
focus and the point exactly on the
surface above that is your epicenter so
for us everything is all these points
are important
but to know the in that I'd what depth
the earthquake will take place what is
the epicenter the fault line and whether
we see the signatures which are
preserved in the landforms on the
surface that is your false cups and all
that now
depth one can easily pick up because
this helps or helps in understanding
that what is the pattern of faulting
okay because whether the default is
dipping in this direction or the fault
is dipping into this direction this one
can pick up based on and what is the
tipped so exercise simple exercise can
it's been done considering the the
distribution of earthquakes now this is
in the case where 2001 Butcher
earthquake occurred and these are all
aftershocks
so aftershocks have been distributed in
the area the which rapid got ruptured
that is subsurface okay so what you see
is this is of course is the plan view
you see the distribution along the
latitude longitude and these are the
location of those epicenter and these
are all pitch and ball diagram which
also indicate and which type of movement
has been observed along this one either
the block has moved up or either the lat
trait has laterally moved or it has
moved down okay so the location of
earthquake is been done as I have
briefly discussed that the instrument
which has been used to record is been
termed as seismograph and the recorded
graph which we get is been termed as
seismograph and this is mainly has been
where the the arrival time of the
difference between the arrival time that
is an essence between the s and P wave
or you take between the the the love and
relative and they take this in the
the difference has been taken into
consideration along with the amplitude
to locate the the epicenter so there's
another diagram along with that which
shows not not only the the with the the
location of the epicenter is important
but for the the civil engineers and as
well as the seismologist they will be
interested in knowing that what is the
amount of horizontal movement and what
is the amount of vertical movement which
has been taken so this it shows that
there's the horizontal moment and the
what will be the vertical moment
so this basically records the ground
shaking so although many seismograph
stations now records earthquake wave
digitally recorded time it's a small
graph like this one especially huge for
visualizing the nature of earthquake
waves that is mainly their amplitude
wavelength and the frequency of the
vibrations so different seismograph are
used to measure for example which has
been shown in be horizontal version and
the vertical motion so the vertical as
well as horizontal motion is also
important because that will help us in
understanding that if in particular
earthquake has been triggered on in in
any given region then what will be the
effect to the the site of interest where
we want to do go for seismic hazard
assessment so basically if you are
having the seismograms okay so the the
difference between the arrival of p-wave
and s-wave has been taken into
consideration and that helps in and
along with that the amplitude has been
taken into consideration so the example
which has been given here where it shows
that you have considered the the
amplitude of the arrival of the
different seismic wave but mostly it has
been taken as and
it's wave arrival because this will
result into the major deformation the P
wave was mostly the compressional but
this one is the shear waves not as an S
wave and the difference between how the
arrival so this will be arriving first
and this will be later and the
difference has been taken here and this
is an log scale which helps in locating
that all or identifying the magnitude of
the earthquake so you have the the
amplitude here you have the the time
difference and connecting these two
points will give you in the chart will
give you the magnitude and what will
what was the magnitude of that
particular earthquake so the the Richter
scale if you take the because the
amplitude will play an important role
what we are seeing here the difference
between the magnitude five and six is
very very large okay and that what has
been we all know that the magnitude if
we have between five and six then the
energy which has been going to be
released will be almost like an factor
of 30 so here we have the the magnitude
six amplitude which you see here is
quite comparatively larger as compared
to what you have the magnitude five so
it is it says an earthquake of magnitude
six registers with ten times the
amplitude as an earthquake of magnitude
five from the same location and this is
the just the differences one on the
Richter scale now if you have like
because the important part will be where
to locate the the earthquake that is an
epicenter on the surface so at least you
need three stations three say smoke
graph that will help you in locating the
earth
see if you these are standard diagram
the curves which are available which
helps in locating the earthquake so you
have the if at least you have the
arrival time difference between the
arrival times of P and S wave have three
different location you can calculate the
the distance and that distance is your
what called the radius can plot it based
on that and that the intersection of
these three points will or three circles
will give you the epicenter
so locating earthquakes basically you
have like three locations which are
going given here so you have one station
which is sitting and SOC oh then TIG and
SSP a so these are the three stations
which were used to locate the epicenter
of one particular earthquake here so
what it shows on this curve here or this
graph that you are having the distance
here and this is your the time
difference again so you have the the
first P wave which is arriving here was
at one point five minutes okay and the
distance which is was been calculated
between the differences is here is one
point five minutes which is equal to
nine hundred kilometers and the this has
increased the time because at the from
the epicenter the wave have traveled so
the time interval has to increased so
this is around three minutes
eighteen hundred kilometers and further
if you go away that is your SS PA and
this one is SSP the the time interval is
almost like five minutes okay and that
has given the the larger distance from
the epicenter so as you move away from
the epicenter so suppose the earthquake
has been triggered here so the the
arrival time apart this station will
be comparatively less here will be
little more and this will be the largest
one so that is what we one can absorb
observe based on the the arrival time
difference okay so the difference in the
arrival time between the P and S wave
reveals the distance from particular
seismograph and to to an earthquake that
is the distance from here to this one
here so this plot shows the record from
seismographs at different locations or
different distances from a single
earthquake for typical crustal because
the the time interval okay it's almost
remained in that because the first
arrival and they secure the arrival of
p-wave and s-wave
depends on because of the and the nature
of the P and S wave traveling through
the different medium and in crust mostly
what we see is the the travel the
velocity remains around six kilometer
per second for the P wave and around
three point five kilometers for the S
wave does the distance for the recording
station to the earthquake focus is given
by so this is an equation which has been
given which which can help you in
calculating the because you need the
time and you need you know the velocity
which has been given here so based on
that this is the TSS the the travel time
for the that is the arrival time of your
s wave and this is P wave and then you
can use the values putting in this
equation and identify the M the distance
okay so the TP TP and TS are the arrival
time of P and S wave respectively
this distance defines a circle centered
on the location of the station upon
which the earthquake focus must lie now
in some places or in some stations I
will not allow you exactly to
to have an intersection here so the the
in-between area has been taken initially
as an epicenter and then with the the
data coming from more stations because
not all regions will have with minimum
three stations they might be having more
stations so if more data comes in then
you can refine the location of the the
epicenter so this is a similar example
which talks about the different
seismographic stations reveals the
location of earthquake epicenter
so seismic waves from an earthquake
moves out concentrically from the focus
and arrives at distance at distant
seismographic stations at different time
so as we were talking about that that if
you are having the different relocated
seismograph then you will have that
davila arrive at different time and then
the second one it tells us not the graph
of the time interval so you are having
the time interval here which has been
given here and then you have the
distance which has been highlighted here
the previous diagram was
also more or less similar okay so what
we see as the travel time versus
distance is called the travel time curve
so we have the travel time curves
available because the P wave travel
almost twice as fast as the S wave so
this will arrive first and this will
alive later because this the velocity is
around six and this is almost around six
three point five or so the interval
between their travel time curves
increases with distance so that what was
been explained in the previous slide
also that in the arrival time here is
will be less because they are close to
the the epicenter and by the the the
difference between the arrival time
increases as you move away from the
epicenter
so by matching the observed interval to
the spacing of the curves a geologist or
decision artist can determine the
distance from station to epicenter and a
Twinner interval occurs at about 5600
kilometers from the epicenter which has
been shown here so if you have three
minimum points then one can easily
locate the earthquake epicenter
now since we have like very fast
computing facilities and algorithms
which are available with us
so this seismographic stations can very
quickly calculate and tells us that
where exactly the epicenter is located
so in no time maybe in few minutes or
maybe I mean less than a minute you will
get the location of the epicenter along
with that there is another exercise
which has been done is you're
identifying the different type of faults
or the slip which has occurred and this
has been done considering the the
arrival of the first motion that is the
arrival of the first wave now not all
these stations will have the similar
arrival that is your what you are having
here positive wave but here first motion
is your negative and so on okay now this
will indicate that what is the the body
the pattern of movement which has
occurred on that in that particular
region so what it shows us here you are
having the fault line and at least you
have the four stations for example which
are located here and based on this he
will also be you will be able to pick up
and identify that what type of movement
has occurred along this one so this
fault geologically we understand that
this is a right lateral fault and what
we see based on the now or observe
considering the and the arrival of the
seismic waves so for seismic stations I
put with respect to the fault line here
and during an earthquake and the the
first arrival wave this what is shown is
the positive one and this one is also
positive one on this side so this shows
push away from epicenter okay so this is
been pushed away this area has been
pushed away from the epicenter of the
piece
trees here for example and and this also
push away from the epicenter various
this one is a negative so this pulls
towards the epicenter okay so you have
the pulling towards one another and this
two blocks are pushing away from one
another so the the first motion of the
p-wave arrives and the seismographic
stations is used to determine the
orientation of the fault plane and the
direction of slip the cave shown here is
for the rupture of right-lateral
strike-slip so you are having a
right-lateral strike-slip note that the
alternative pattern of pushes and pulls
would remain the same so this remains
the same if the the plane perpendicular
to the rupture with left lateral
displacement is been taken into
consideration okay
the seismologist can usually choose
between the two possibilities using
original information such as field
mapping of the fall trees so what it we
are trying to tell here this one or you
consider this one here then the the
motion remains the same here because
what has been recorded but based on the
along with the the seismological
information the field information is
extremely important now this type of
exercise helps us in identifying the
fall times okay that is what we call the
the whether it is a reverse fault normal
fault and the the diagrams which we get
has been termed as pitch ball diagram
okay so we have in case of the normal a
faulting you will find which has been
shown that you have the one block is
moving away so there is an extension
here and this shows the compression here
this is in the case of the reverse fault
whereas this in this case you have
compression here you have the extension
along this one okay so I will stop here
and will continue in the next lecture
thank you so much
[Music]
[Music]
[Music]
