noc20-ae13-lec03_Lecture-03: Introduction (contd.)

IIT Kanpur July 201
20 followers
1 Video View·Dec 2, 2023
Lecture-03: Introduction (contd.)
Okay, so let us continue the introductory lecture and what we are doing that we have
seen the different classification of aircraft and their application, different purposes
and then where we stopped maybe we will continue from there, how this jet engines actually
works.
And this is what you can see and this is the one which we have been looking at, so this
video will give you some idea about other aspect,
Bird its fly by pushing air, mankind has made many things that push air, one of the great
machines that push air is the challenge, challenge is some air in the front, it push out of air
outer back, that works is called thrust that builds the aeroplane drew the sky but see
how it works.
Now, big fan in the front of the engine force air around the engine, it sucks air into the
core for now let us follow the air in the core, it goes into a compressor something
like many household fans joined together, each fan gets smaller and smaller as the blades
squeeze the air into a tighter and tighter space compressing the air like you squeeze
a balloon until that squeeze the air around.
A kind of super gasoline in a combustor that air if you miss you meets a flame and shoots
out the back of the engine, they rush a higher spins, its took up energy from the heat in
air, its spins the shaft connected to the fan and the front of the engine, the excess
hot air from the combustor blows out the back of the engine producing thrust, rather than
air rushing outside the engine core together, the turbine and fan push a larger mass of
air than the core ever can for much more thrust.
When the extra air pass around the engine door works more efficiently, it moves more
slowly then the high air flushing out the combustor and the back of the engine.
One of the first engine makers Pratt and Whitney recently designed the new jet engine that
lets the fan push air more slowly than the turbine by putting an amazing gear between,
Pratt and Whitney calls this the pure power engine because it uses less fuel and makes
more thrust and at the same time, less fuel saves money and save the oceans and environment
and all living things.
And when they move slow, the noise drive so much to compare the hear ear in the sky, it
is a new design for jet engines and the new era for jet aeroplanes that we all can enjoy.
Now, you can see this is a new engine of the Pratt and Whitney but the interesting to note
here is that if you recall there across the world, there are multiple flights were grounded
because of some glitches in new engine.
Now, this is another video;
Rolls-Royce is one of the most leading engineering companies designed and developing high technology
power solutions based on theory of piston engines, recently its applications on lands
at sea and in air now, engineering strength is based on 2 technology platforms; the gas
turbine and the piston engine.
So, how do they work?
In the case of the gas turbine on an airliner, the air is sucked in by the large front fan.
The majority of the air is directed around the engine as pure thrust direct into the
engine and it squeeze to a compressor consisting of a same
. So, this will give you an idea of the similar
nature but the another interesting video I would like you to draw your attention is the
looking at the different kind of now these are what you have seen so far these are all
like civilian applications.
Now, there is another category that we have already talked about is the military application
and there the engines are different and there are different manufacturer and you can just
go through that video how these different kind of fighter engines are in place, even
today how they look like, their operational range and things like that.
So that gives you an idea how this different and you could see the different fighter aircrafts
which are having multi fighting or multiple capabilities, now just to again brief in the
thing that you can have aero engines and there could be air breathing and the rocket engines
where the whole thing is the in the rocket engine the principle is different, where you
use some propellant and the other is the air breathing engines that is what we are going
to talk about and that there are multiple different kinds of engine.
But what you have seen the example mostly they belong to the category of turbofans,
now any aero engine once if you look at it or the propulsion system, there are certain
characteristics it should have, it should be reliable that means it has losing power
in an airplane is a substantially a greater problem than in road vehicles, so it should
be more reliable that could be one of the feature like reliability.
Then it should operate at extreme temperature, pressure and speed that means, the take-off
it should be at the sea level then when it goes to high altitude flying, then it that
means operation limits should be high, then the light weight, so the weight has to be
as light as possible because heavy engine increases the engine weight and the aircraft
weight, so it should be powerful enough to overcome any weight and drag of the aircraft,
small and easily streamline to create a drag.
Then the field repairable to keep the cost of replacement, fuel efficient, then capable
of operating at sufficient altitude for the aircraft generate as less noise as possible
and also the emission, low in emission, so all these are some of the features of the
aero engine that one could expect.
Now, if you say that then this could be again divided into multiple categories like these
are starting from external internal combustion engine or other type like solar and human
all these, so internal this could be steam, turbine, stirling or nuclear so that is what
we are not going to do too much of discussion.
Now, the internal combustion engine it could be reaction or shaft base.
Now, when you talk about the reaction engine, it could be turbine based, turbo ram, turbo
rocket or ram based ramjet, pulse jet, scramjet this is what we will do discussion or it could
be shaft based where you have a shaft in along with the shaft, there are other components
which are sitting there, so this could be continuous or intermittent and then we will
talk about turboprop, turbo shaft, turbofan or as a turbo based, we have turbo jet, turbofan.
So, these are also we are going to talk, now again this was the old engine which was Wankel
engine, now the piston engine has different types, so this could be inline, rotary and
V type, radial type, so these are known as reciprocating engine, so this was initially
or first used this piston engines.
So, inline engine has cylinders I mean they are lined up in a row, it typically has an
even number of cylinders.
But there are instances where 3 to 5 cylinder engines also very; it were common in early
aircraft including the Wright flyer which was the 12 horsepower engine, there are some
advantage of an inline engine is that it allows the aircraft to be designed with narrow frontal
area for low drag but if the engine crankshaft is located to be mounted up high for ground
clearance even with short landing gears.
But there is a disadvantage also, it has a very poor power to weight ratio because the
crankcase and the crankshaft are long and thus heavy, so these are pretty much this
inline design was abundant and these are hardly or very rarely used in the modern engine.
Now, the other could be rotary type which was extensively used in World War I, as it
is lightweight, powerful, cheap, easy to manufacture.
So, this has cylinders in circles like this, so but there are also had an advantages and
disadvantages with this kind of engines that is why it was sort of out of the operation
because one of the biggest disadvantage of this kind of rotary engine is the gyroscopic
effect for the heavy rotating part.
Now, there are radial type also and opposed type or this is a combustion type.
Now, moving ahead we can have turbo continuous combustion type, we have a turboprop engine
where it is a single shaft which sucks the air inside, then pass through the compressor
and then passes through like this, so there is a free turbine sitting there or this is
another engine which would be coming under that category of is the turbo shaft engine,
so this was primarily for helicopter an auxiliary power units.
It is a very similar to turboprop but some key differences are there like in a turbo
prop, the propeller is supported by the engine and the engine is bolted to the air fan but
whereas in the turbo shaft, the engine does not provide any direct physical support to
the helicopters rotor.
The rotor is connected to a transmission which itself is bolted to the air fan and the turbo
shaft engine simply fits the transmission by a rotating shaft.
Now, there are another one is the propeller fan, it is or unducted fan, sometimes this
is a modified turbofan engine with the fan placed outside of the engine nozzle and the
same axis of the compressor blade, prop fan or propeller fan engines are also known as
ultra-high bypass engines most recently open rotor jet engines.
The design is indented or intended to offer the speed performance of a turbofan, all the
economy of a turboprop.
So, there is an added basically, advantage of turboprop and turbo fan that is what it
was used, so this is also bit of fuel efficiency but obviously, when you have these components
are sitting outside that will create a lot of noise, so this is another image of that
kind of engine which was there.
Now, when you move to the reaction category; in the reaction category you could have ramjet
engine and that could be at the subsonic level or supersonic ramjet which is called scramjet,
here there is no rotating component here as you can see, the air comes through this and
then passes across the combustion or the; these things and then finally you get the
these things done, so this is a ramjet concept.
And this is the flight which used that now, the other is the valve pulse jet, so this
Leduc was actually which was the first ramjet flight in 1949 actually, now the other is
the valve pulse jet, so pulse jet is a very simple type of jet engine with the combustion
occurs in pulses, now these are intermittent combustion while ramjet compared to ramjet
but ramjet provides continuous combustion.
So, these pulse jet engines are very unique in type, for jet engines this is able to operate
statically with few or no moving parts, they are simple cheap to construct, so there is
an excellent balance between these.
There are 2 broad types; one is the valved, one is the valve less.
In the valved, there is a mechanical one-way valve which is simple leaf spring type of
shutter.
So, if the valve open, so air comes in or the phase charge of air is allowed to come
inside, then the air mixes with the fuel and then explosion takes place and which starts
the valve and forces the hot gas to go out through the tailpipe and this is how that
operates or in the valve less, pulse jet you have no moving parts as such and only there
is control is achieved through the geometrically.
So, this expels the exhaust to go out of the long tail pipe for more efficient propulsion
and the valve less or the valve less pulse jet engine operates on the same principle
as valve type, so the combustion process creates 2 shock fronts, one traveling down and one
upper long type and other down the lower tube, now by tilting these or turning these things
a resonating combustion process can be achieved which can produce considerable amount of thrust.
So, fuel consumption is very high, noise level is also unacceptable, the French engine manufacturers
like SNECMA developed these pulsejets in later 40s to use for drones and all this.
Now, there is also history behind that and if somebody is interested you can look through.
But then you have this other type of things where there is also pulse detonation engine
and the this is another pulse jet engine, so this is the scramjet, here where the flow
comes here with supersonic and then pass through this inlet section which would be lot of shock
interaction, shock boundary layer interaction takes place and then finally it allows through
combustion chamber and then finally it produces the thrust.
It is an evolution of the ramjet that are able to operate at higher Mach number than
ramjet and kind of air within it is an acronym stands for supersonic this combustion of the
ramjet, so it is a 1950s and 60s the variety of experimental scam jets engines were built
and ground tested and now 81, there are tests made in Australia presently in Brazil, China,
France, Germany, India, Italy, Japan, Russia, South Korea there is a they have different,
different programs for this scramjet.
But at the same time one has to note that no scramjet powered vehicle as yet been produced
outside an experimental program, this finds its application in many recent hypersonic
speed vehicle like rocket future commercial transport in the 21st century or at the single
stage orbit rocket launchers but still there is nothing like that, so there are hydrocarbon
or hydrogen are used for fuels in the scramjet.
Scramjets are quite simple in design but aerodynamically they are more complex than jet engines, so
Boeing NASA X-43 is an example of experimental scramjet with a valve speed record of jet
powered Mach 9.7 which is roughly 1200 kilometre per hour or X-43 S 8 flight speed record in
16 November 2004.
Now, Boeing is also doing another X51which is known as X51 Waverider is an unmanned scramjet
demonstration aircraft that completed its first hypersonic flight on May 26, I think
2010 and for around 6 minutes and over Mach 5 in 2013, so these are still at the demonstration
level.
Now, moving to that the biggest development of this era is the turbo jet or turbofan engines,
so which we have already seen through the video that how these turbojet engines actually
work, you have intake diffuser, compressor, then combustor pass through turbine and the
nozzle and there are different turbojet engines like subsonic and supersonic.
So, when you talk about supersonic, then this has some afterburner that means, after the
turbine stages you have another layer or level of combustion which takes place there.
So, this allows these things to have some more quick manoeuvring, accelerations and
all these things, some examples like GJ 33 flight, GJ 35, these are turbojet engines.
Then, now the development which took place is the turbofan engine which are added fan
sitting there compared to turbojet and advantage associated with turbofan engine is that this
is I mean, primarily is the engine which has been in used for this modern days aircraft
whether it is a civilian application or it is an military application and there are 2
categories; one is bypass ratio, based on the bypass ratio, one is the low, one is the
high.
When it is high then the cold air also contribute to the thrust, total thrust quite a bit, low
bypass ratio means bulk of the air passed through the core of the engine where it gains
energy and all these.
So, this is another picture of high pressure compressor and a high pressure turbine and
all these, so this is a low bypass ratio afterburning turbofan engines, so the turbofan engines
are also equipped with after burning facility and that is why they are quite often used
in these military applications.
And there are advantages which are made and this is a huge list of some turbofan engines,
there are different manufacturers I mean, primarily there are few engine manufacturers
which are there in market, one of the British Rolls-Royce company, then you have GE, which
is US based companies, SNECMA is a French company, Pratt and Whitney this is again US
company, based company.
And there are also some and they have different, different engine, they have a different thrust
range and they are used for different aircraft, so you can see the range is quite high for
this turbofan which includes both the application of civilian and military applications and
they are kind of getting improved every day and they pretty much serve the purpose of
this aviation industry.
And but obviously, nothing comes with free of cost even with the engine, there are; now
these are some of the high bypass ratio turbofan engines, these are often or primarily used
in the civilian aircraft, so that gives you an idea about what kind of thrust it uses
but some of them are also used in the like this BA 146 is a fighter aircraft, so this
gives you an range bypass ratio, what is the diameter, length.
So, these are all sort of an design parameters you may not be able to appreciate at this
moment but when you go along with these things, then that time you will see how these things
are quite important and then there is another which is called turbo ramjet, now turbo ramjet
is a combination of turbojet and ramjet, it is a type of engine that which is designed
for high speed flight and its uses both the combination of turbo jet and up to certain
Mach number, let us say 2, 3 with the ramjet and beyond that the turbo actually starts
operation.
Now, this is turbo rocket engine there and this is another air breathing engine combining
the elements of jet engine and the rocket which is known as the acronym it here, so
that uses certain informations and all these, now the other power sources are electric powered
aircraft, so this is an electric aircraft, this is a solar airplane, so these are the
some of these recent developments that took place where these use of these resources which
are used to flights.
And these developments are taking obviously to the; so this is another human flight that
you can see, now just to conclude the whole idea about these basic jet propulsion, you
can see that if you have a simple tube and there is an area where the pressure difference
across that this is how the force which you can get across this particular surface due
to the pressure difference.
And now, when a small increment the gas starts to leave the tube, so there will be exit velocity
and then the pressure drops, so you get this thrust and this pressure would move to the
same pressure, if the thrust moves to 0, okay so this pressure inside the tube attains an
equilibrium with ambient and the net thrust reduces to 0, okay.
So, now if the tube is maintained at a certain pressure Pi, then the thrust would be calculated
like that, so if we avoid any of these losses like frictional, so one can easily estimate
that thrust which is simple way like what is the exit velocity and the mass flow rate
it handles, so it is m dot Ue.
Now, the simple principle which is just to calculate the force balance and all this if
you put it together in an aircraft this is what you have lift acted, weight update, drag
and thrust.
And that is how one can actually estimate the basic thrust for an aircraft engine or
this air breathing engine, so that gives you an basic idea how to do these calculations
and sort of with a detailed overview of the different kind of aircraft, their engines
all these things, so stop these things, now continue the discussion in the next lecture.
