Intro-Chemistry and Physics of Surfaces and Interfaces

IIT Kanpur July 201
20 followers
1 Video View·Dec 2, 2023
Intro Video of "Chemistry and Physics of Surfaces and Interfaces" course by Prof. Thiruvancheril G. Gopakumar, Department of Chemistry, IIT-Kanpur
Hello everyone, welcome.
My name is Gopakumar.
I am a physical chemist, an experimental physical chemist working in the department of chemistry
IIT Kanpur.
I will be in this lecture discussing to you about surfaces and interfaces and its physical
chemistry and also the physical aspects.
And we will, before we go into the lecture, we will also have a look in detail about the
importance of these kind of surfaces and interfaces.
So you would imagine that you are actually living in a world where interfaces are unavoidable.
For example, if I touch both of my hands, you see I have formed an interface which is
actually a solid-solid interface.
Or when I am sitting or standing in this room, there is air for example around us which is
forming something again called a solid-air interface.
Or you jump into water or to swimming pool, you see suddenly you have formed a solid-liquid
interface.
So solid-solid or solid-liquid or solid-air interfaces are ubiquitous in the current day
or in wherever you are living.
Therefore, it is been always an interesting aspect for the scientist to understand basically
how these interfaces are behaving.
Are they slightly different from the solid itself or interfaces are the same?
And that is actually always a question that people asked around.
And that is also where the surface science itself as a branch of science has emerged
over the time.
But when you also look into the applications based on surfaces and interfaces, you would
see the modern technology for example light emitting diodes or thin film transistors or
organic light emitting diode based TVs for example, they all use interfaces.
I will show you or demonstrate to you just by looking into a cross-section or a schematic
cross-section of an LED for example.
You can already see to operate such an LED, what you need is actually the so-called emitting
layer from which you get the light, yes.
So that is where you get the light, h nu.
So that is the amount of energy that is coming out.
But you can see that it is not just the emitting layer that is embedded in this LED.
You have basically the whole transporting layer, electron transporting layer, you have
the metal cathode, you have the transparent conductor that actually act as the substrate
to emit the light or through which the light is coming out.
These kind of things are quite the components of a simple LED for example, yes.
So that means you see how many interfaces that we have here.
We have here about 4 or 5 interfaces that you need to create in order to make a small
electronic device like an organic light emitting diode or a light emitting diode.
So you will see in the lectures that anywhere, anytime you would actually like to create
some kind of an electronic device, you would require to create a lot of interfaces.
So that means even in technology or in the modern technology, this is quite important
to understand how the interfaces are forming, the microscopic structure, the electronic
structure and the chemical structure.
So these are the 3 things that we are going to address through the course.
So therefore I have actually just divided our course chemistry and physics of surfaces
and interfaces in this manner where we will first look at the importance of the surface
and interfaces.
Then we will look into the microscopic structure of surfaces, clean surfaces particularly and
we will be focusing mostly on crystalline surfaces and then we will actually just understand
how to nomenclature, how to prepare reconstructions on surfaces and then we will go to something
called deposition of material on surfaces and forming something called an add layer
or interface, adsorbed layer on top of a substrate.
Then we will basically just familiarize different type of interfaces like metal-metal interfaces,
metal-semiconductor interface or metal-molecule interface and then we will also familiarize
something called molecular self-assembly that is something you would find in the interface
formation of a molecule on surfaces.
And we will basically understand all these through this kind of techniques which are
basically microscopic technique and also two spectroscopic technique to understand the
microscopic structure, the electronic structure and also the chemical structure of these interfaces
and surfaces.
So that is what I am hoping to give you through my lecture and through the next 40 lectures
that we are presenting I will be basically covering these topics.
They may be not a particular order in which I would be following this but you would find
that more or less the same order will also be kind of followed through the lectures.
I am welcoming you all to my lecture on Chemistry and Physics of Surfaces and Interfaces and
I am looking forward to work with you in the next 40 lectures.
Thank you very much.
