noc21-me33-lec36, 37

IIT Kanpur July 201
20 followers
4 Video Views·Dec 2, 2023
Welcome to week 8 of our NPTEL course on muffler acoustics.
So in since the last week we have basically moved towards more towards the business end
of the things you know really stepping into analysis of you know commercially used mufflers
which are perforated mufflers.
So after developing some of the background some of you know although very briefly the
background required for dealing with such stuff where mean flow is present like air
acoustic state variables and you know introduction to constant perforated elements.
What we will do in this week's lecture majority of the part of the lecture will be detailed
analysis of CTRs concentric tube resonators CTRs concentric tube resonators which is either
fully perforated that is basically it is a counterpart of a simple expansion chamber
concentric simple expansion chamber.
And otherwise it can have only a partially perforated airway or a central duct through
which air passes and it is only partially perforated from either sides.
So this serves to you know develop some sort of a quarter wave resonators or neck extensions
at the inlet as well as the outlet ok.
So the purpose of such a thing is basically so that the resonators that are formed at
the inlet and outlet you know at the resonance frequencies of such quarter wave resonators
the attenuation produced is maximum and that would completely annihilate or you know completely
overcome the troughs that would form if such extensions were not there.
It is exactly the same as extend inlet and outlet thing where you know the first the
peak due to the quarter wave resonator at the inlet is able to nullify or cancel the
trough that would occur at the first resonance whereas the peak at the due to the second
or the quarter wave resonator at the outlet you know it is able to nullify the second
resonance and so on.
So we pretty much apply the same technique but again like I have been mentioning time
and again it is basically the perforates that are very crucial and they help in guiding
the flow and we need to develop they act like a bridge really.
So although extend inlet and outlet have been studied a lot relatively lesser focus is there
on CTRs with neck extensions and so in this lecture we will go through a detailed development
of the transfer matrices for such a thing incorporating the effects of mean flow and
you know you probably go to MATLAB to help us with some of the parametric studies where
mean flow is involved and we can also possibly take into account the effect of end corrections
at least for a stationary media.
In the last class I guess we let me go to the last slide so we stopped somewhere here
okay B inverse you know B will be when Mach number is 0 that is basically you know your
this case Mach number when it is 0 it will not be an identity matrix because of the particular
arrangement of the state variables that's alright but in any case even when M0 is 0
this is not you know inverse it will be 1 so there is no problem in that when it will
be not 1 then we have to invert this matrix so you know for argument sake let us call
this B inverse A you know let us call this B inverse A as C matrix okay which is in this
case a 4 cross 4 matrix alright this is what we get this part.
So the question now arises how do we solve it so typically what is known as a generalized
decoupling method and other things in the literature is basically you know the same
thing can be solved in using just one line command in MATLAB using a exponential function
matrix exponential function so basically you know let me do some simple linear algebra
things so e to the power we already know the function isn't it 1 plus x exponential function
x square by 2 factorial x cube by 3 factorial and so on so if a matrix is now raised to
the power you know e to the power A, A can be some matrix for argument sake we will
keep this as C matrix okay so this is given by defined as C matrix plus C square 2 factorial
C cube 3 factorial it is defined like that and how do we compute that that's a separate
matter you need to find out the Eigen values and Eigen values matrix when it is written
side by side inverse of that into the you know it is basically you know part of the
linear algebra so I will not go into the fact that how this guy is computed it is defined
like that or it is defined like that but in MATLAB what you just need to do is that type
exp m and give C so it will basically shoot out you some matrix D is equal to exp m C
so it will compute this using some algorithm that is there in it why is this useful to
us now because let me take a small digression here let's say we have a simple first order
ODE you know what the solution of this okay y is equal to alpha e to the power A x A is
known alpha is the constant which needs to be determined from the one boundary condition
because you know if you put this thing LHS and right hand side will be the same where
alpha is a arbitrary constant now similarly if we were to you know propose a solution
of the form of this equation you know x vector is nothing but your say you know e to the
power C matrix times Z remember we need to integrate with respect to Z so here we have
this and the constant let me call that constant you know some number let's say q okay q is
a basically a vector of unknown constants that is basically q 1 q 2 q 3 and q 4 okay
so this is the solution why is this a solution because it is easy to see that I mean if we
were to substitute this solution into this one LHS and RHS would be the same you will
eventually get back C matrix times this thing because suppose if you differentiate we expand
this guy using this formulae and differentiate with respect to Z so we get I plus C Z C Z
square Z square and so on so if you differentiate this term will be 0 and what will we get is
basically C plus your C square but here will be the denominator will be only 1 factorial
C cube and here will have 2 factorial and so on so and eventually we can just take C
common and realize and this will be Z here and realize that Z square I am sorry for that
that we are eventually left with this thing C square by Z square by 2 factorial and so
on so let me move to the other page so we will be getting C you know e to the power
C Z again and there is a constant like I said q here so if you differentiate this so this
is nothing but this underlying terms only from here to here this is nothing but C matrix
times you know X because that is what we proposed isn't it so this is X so basically if we
differentiate this guy with respect to Z we will get back this solution and this happens
to be this particular guy this happens to be our RHS so in short what I am trying to
say is that this solution this particular form of the solution always satisfies our
differential equation ODE a set of linear first order differential equations so if you
do the matrix exponential we will get this and in MATLAB like I said all we need to do
is like it will you know pop out some matrix D is equal to exponential exp m not exp just
exp m C so you can have fun with this thing if q is a constant we need to be determined
so let us say we have this solution so we will move on from here now our job now is
to determine so let us go back let me draw it again for you anyways so this is our perforated
bridge section isn't it and we have the duct 1 here and 2 here annular part let us say
we want we are fixing a coordinate system Z is equal to here at this point and Z is
equal to L okay so now what do we do we are fixing a coordinate system at these points
mentioned here at point A and B Z is equal to 0 and Z is equal to L our first job now
is to determine the constant Q in terms of the state variable state variable at we will
call simply this as X0 and XL okay so we know the solution in the form this thing so X is
equal to e to the power C at Z is equal to 0 this is just 0 which is you know your identity
matrix so I will simply write this as identity matrix times the vector Q at 0 okay so this
becomes at Z is equal to 0 the simply the vector Q okay so now vector X at any point
is your e to the power C Z into X 0 isn't it now we want to relate things at Z is equal to L so
what we need to do is that at Z is equal to L this becomes e to the power C L we simply multiply
the matrix C each and every element of the matrix C with L and multiplied here is your
vector here alright so eventually you know what do we get so you know if you recall the
transfer matrix representation obviously you know relates things at the upstream with those
at the downstream so we need to invert it so at X is equal to 0 we relate things with those at
Z is equal to L so what happens is that e to the power C L inverse of this matrix at X is equal
to L okay so we will sort of get this so this can obviously be written as e to the power minus or
we just it is a matrix so we take this inside this guy inside and okay so we do get that alright
so we get this representation okay this becomes very simple now just in MATLAB you would just
probably do exp M and we will just say minus C L so we can just multiply the number L length L or
the perforated section to each and every element of the C matrix that is basically B inverse A
and put a minus sign and just you know give this command so you know this whatever this guy is you
know whatever this thing we can for just for our convention we can just for our simplicity what we
can do is that we can say this is your let us say your T matrix okay and here T is 4 cross 4 and
your XL is 4 cross X 0 or XL is 4 cross 1 okay let us expand this out and you know let us do
this here tilde tilde tilde so this is an expanded out form of this guy and here we will have this
Z Z is equal to 0 and C 0 U tilde Z is equal to L okay so this is your fully expanded out form
okay so for simplicity let me put this dotted lines okay now where do we go from here so what
needs to be done at this stage so we have got a solution at least symbolically we would need
to use computer algebra otherwise hand calculations even for a simple 2 dot interacting
system can get very messy so you know often you have multiple interacting that is in principle
you know you it is possible to get things like this kind of a thing you have multiple you know
perforated duct something like this and you have like this and then you finally have this kind of
thing it forms basically you know your multiple extensions so multiple neck extensions are there
in principle you can have any so you can have systems like this and the flow comes in from here
and let me just sort of complete this figure and similar thing would sort of exist here we have
this kind of a thing okay so you can have multiple such things imagine if you were to do all this by
hand calculations all right things would become just impossible you know solving like this is
like 1 2 3 4 so each duct has 2 variables so you know something like you know 8 4 4 into 2 that is
8 8 cross 8 matrix so you know it becomes almost impossible to deal with a such a coupled 8 cross
8 system or the 8th order differential equation if you were to combine all of the variables into
1 so you know it becomes quite messy and then that is the reason that it is best to work I
would prefer working in terms of a set of coupled linear ODEs and keep it first order so you know
MATLAB or any other algorithm would do it pretty efficiently for you even if you do not rely on
this thing you can always write algorithms to you know find out matrix exponential so the idea is
definitely use some computational algorithm rather than you know seeking analytical solutions
because perforated ducts really require that especially when you have mean flow so I will
keep this figure you know just like just like that and sort of move on so you know I would
like to remind ourselves back that this is a system that we originally intended to study we
intended to study okay we intended to study this all right so how do we go about this now we have
got this system and we would like to impose the boundary conditions now is the time to do that
now clearly you know as you can see from the figure that this is a partially perforated section
so at z is equal to 0 at z is equal to L we have this so what about the annular cavities 1 and 2
or let me yeah 1 and 2 is the use for this duct so let me use some other term we will call it
A and B okay so if for the portion A that is the cavity formed here at the extension at the inlet
is a length LA and LB are 0 you know then it obviously reduces the case to the case of a fully
perforated expansion chamber fully perforated concentric tube expansion chamber something like
this it is fully thing so let me let me just draw this thing again for you guys so it is
something like this apologies for the color we have holes everywhere perforates right from the
beginning all the way until the end so things would become sort of fairly simple let me derive
you know this sort of a thing for you guys and then we will perhaps do some you know get back
to this equation again and involved in neck extensions okay so we will do that so what
happens here really so you know U2 is the stuff where we need to apply the boundary conditions
remember this is the duct so you know really what we have is that U2 is equal to 0 at z is
equal to L because you are you know you are this thing is kind of squeezing or basically you have
kind of extended the duct perforated section throughout the chamber so Z really Z is equal
to 0 starts from one of the faces and Z is equal to L is at the other end face alright so you have
this sort of a thing what it means for the transfer matrix that we have derived here let
me use the red color so U2 at Z is equal to L is 0 as we have just noted here this is the condition
okay so what it would mean is that we do not have to deal you know this is multiplied by this this
with this this with this but then this guy is 0 so you know we can get rid of this particular
column okay because we do not have to do deal with this similarly U2 is also 0 at Z is equal to 0 so
what it would mean is that this into this plus this into this plus this into this is 0 but we
would like to sort of relate you know these two guys with these two guys so although we have
eliminated U2 but we still have T13 multiplied with P2 and T23 multiplied with P2 also and we
have one more relation P2 is related P2 at Z is equal to 0 is related to the other variable
to the downstream using the third this thing but in the process we also found out another
relations you know T41 multiplied by P1 T42 multiplied by this rho naught C naught U1
tilde T43 multiplied with P2 linear combination of this is equal to 0 from that we can get some
equations for P2 I mean express P2 in terms of these two quantities and then basically put that
P2 in the first two equations and simplify things let us sort of get started with it that we will
put T41 P1 tilde plus T42 rho naught C naught U1 tilde plus T43 P2 tilde is equal to 0 so what this
would mean is that P2 tilde is your nothing but T41 P1 tilde plus T42 rho naught C naught U1 tilde
this is of course at Z is equal to L all of them so this happens and T43 okay so this is there and
so we get this and this is like I said at Z is equal to L okay.
So now we will keep this equation let us call this equation 1 we will keep this equation 1
aside and in the other chunk of equations you know now we need to focus really on this guy
this entire thing is multiplied by this thing so basically P2 will come in here so let us do the
maths let me go to another slide so where I put P1 tilde and rho naught C naught U1 tilde as
something like this is going to be a bit messy so I am kind of forewarning you about the thing
so be a bit patient with the simplifications what I would strongly recommend to all of the
students here in the class especially the ones who are certain to take up the final exam and
are doing assignments is that please work out the algebra on a piece of paper and you know
the using the longhand approach that is very important otherwise you will probably never
be able to understand or appreciate things you know otherwise it is just like this.
So this is Z is equal to L and of course I am sorry there is a mistake so I should have written
this is the last so this is P2 my mistake sorry so Z is equal to L okay so this is 2 cross 3 and
this is 3 cross 1 so you get 2 cross 1 now you know using equation 1 we need to eliminate P2
this is of course at Z is equal to L okay so P2 thing will be put in here so let us sort of do
that it is going to take the entire thing so I am not going to bother writing with this T11,
T12 and T13, T21, T22, T23 and what we will get P1 and rho 0 C0 u1 and now it is the time to
substitute all these things in here so what we will do is that the first term here would be
minus T41 by T43 so minus T41 by T43 and into P1 isn't it P1 so I am not writing at Z is equal
to L it is sort of very well understood so minus T42 by T43 at T4 this thing and so we get this
thing so what this thing is there now we have really this equation okay.
So now we need to do term by term multiplication of each of the parts and rearrange the thing so
what I am going to do is that I am just going to go like this and start to multiply T11
times P1 tilde T12 times rho 0 C0 u1 tilde and now multiply this chunk with the entire thing so
this is going to be the part that requires a little bit of patience and a lot of concentration
so my request again is that please do these derivations for yourself on a piece of paper
maintain a separate notebook those who are at least taking exams and are serious about this
one so T42 T43 rho 0 C0 u1 tilde okay so let us first simplify this particular first row so this
would or rather let me just sort of write down the second row itself and it is then we will
simplify all of that together so T22 rho 0 C0 u1 tilde so again you will get 223 u1 tilde and
minus T23 T42 T43 rho 0 C0 u1 tilde okay now we can comfortably combine these guys into the
following so we get T11 minus T13 T41 T43 times P1 tilde plus T12 minus T13 T42 T43 rho 0 C1 u1
tilde okay so this is the first equation the other one is T21 minus T23 T41 T43 T1 tilde
plus T22 T23 T42 T43 rho 0 C0 u1 tilde so this is your second row so now I guess we are in a
position to relate things at the upstream of a CTR with those at the downstream so okay so we
get this okay and here of course we get P1 at Z is equal to L okay this is how it looks like
now the big transfer matrix is finally reduced to a 2 cross 2 matrix where we have related things
what goes on at this point to this point where your Z is really stretched Z becomes here at 0
and Z is equal to L here so it is a fully perforated pipe and we have related things
just here to that somewhere here Z is equal to 1 to Z is equal to L and so this is how it looks
like in terms of flow well flow is there implicitly because you know if you recall we are calling
this entire guy V inverse A as C and e to the power CZ that is your T matrix and so
all this manipulation will eventually you know lead you to this form.
So now since mean flow is there and as we can see you know your diameter of the inlet
and outlet is also the same so the transmission loss expression would really basically you know
sort of result back to the one that is used for classical state variables because you remember
you have a term like 1 plus MI and 1 well 1 plus O I and O means inlet and outlet or maybe the
other way around the main thing is that these things will cancel out because they are the same
so eventually in terms of the final matrix you can call this matrix as T1 matrix so you know
you can call this entire thing as T1. So T1 matrix which relates things here so the
transmission loss will be completely decided by this particular matrix and it you can use
expressions of the classical state variables as well in this case.
So we have analyzed at least symbolically a fully perforated concentric tube resonator what we now
have to do is basically the way we will go about doing the derivations from now is that we will
sort of get the things for the extensions when you have extensions at the inlet and outlet so
there what are the boundary conditions and how do we go about that okay so let me sort of do
the derivation again for you but with sort of different boundary conditions so it is going
to be much more tedious than this case because now you have your other impedance expressions
in terms of cot or tan and all that sort of a thing we will probably put that later but the
funda is the same the main idea fundamentals are the same so let us let us do that so what we are
going to do now is analyze basically figure out the transfer matrix for a concentric tube
resonator but with extensions at the inlet and outlet so we probably we are looking for a
solution of this sort but only thing is that now we have our neck extensions also there so let me
draw a clean rather clean image of this and somewhere like in here something like this okay
so the flow goes something like this when these here okay so what we want is the stuff between
this is Z is equal to 0 Z is equal to L like I said this part is a b so it is quite clear now
that you know this is duct 1 2 all right and this can be circular or elliptical in shape whatever
it is there are couple of things that you know sort of needs to be clarified right at the outset
is that you know looking into the cavity you know velocity direction is taken or positive
along the along this direction that is along the direction that I am pointing somewhere here so
looking into the cavity like this is basically what you will do is put the impedance P2 tilde
at 0 and rho 0 C0 U2 at 0 but here you will have a minus sign because it is looking into the cavity
so this is equal to your minus J rho 0 C0 note that it is not y0 because you have we are kind
of changing the acoustic velocity variable it is not a mass velocity any longer it is a non
dimension or a velocity variable has the same dimension as pressure so it is cot k0 LA so
this length is LA okay so this length is LA and LB so we have this sort of a thing and P2 by rho 0
C0 this is L is equal to minus J times rho 0 C0 cot k0 LB where LB is the length like I mentioned
so this of course we are looking into the cavity like this all right so with this boundary condition
not here we do not have U2 and U2 at 0 equal to 0 neither we have U2 at Z is equal to L0
although I must mention here that these plates these end plates they are rigid so that much we
know of what does this mean that is why we have this cot k0 expression but now using let us say
the boundary condition 1 and 2 we would like to eliminate some variables that is your P2 and rho
0 C0 U2 at Z is equal to 0 and Z is equal to L we would want to eliminate that and let us see
how we sort of go about our business so well we have this so well in terms of P2 at Z is equal
to 0 we have this thing so what we really can do is that the divide P2 at Z is equal to 0 by this
thing so we have your divide this by minus J rho 0 C0 cot k0 LA I guess but you also have a minus
sign sitting in here so this would be plus all right and this entire thing can be written something
this note that the transfer matrix parameters themselves would not really change it is just
that the boundary conditions are different so eventually the final matrix T1 matrix that will
change so we have this P1 and rho 0 C0 U1 P2 now again here we need to do the same trick you know
rho 0 C0 U2 goes on the numerator and this guy comes down so this would be P2 by rho 0 C0 cot k0
LB and here will be so we have this sort of a thing so what we can possibly do is that you
have a minus sitting in here okay so if we take the minus here and minus here here here then we
possibly get rid of the terms in here isn't it so this is cot k0 LB sorry for my handwriting but
that is what it is so we have done well so far now what we really need to do is as usual we
need to relate this two guys with these two guys and in the process eliminate P2 somewhere here
anyways we have reduced now the things to only three variables so we need to wisely use the
equation so as usual we start from the this this row so this so this one into this this into this
T1 3 into P2 and T1 T minus 1 4 and 2 again so P2 can be taken common in this set of equations
and also in this one and then we have sort of another relation we can we can choose whatever
we want in terms of we have actually variables here so we have two more equations let us sort
of cleverly do it it is going to be a little bit involved algebra so please bear with me in the
derivation so P1 tilde and rho 0 C0 U1 at Z is equal to 0 so I am just writing 0 here with the
understanding that this is that Z is equal to 0 T11 into P1 and T12 and now what we have to do
is T13 into P2 and minus T14 into P2 rho 0 C0 cot K0 this thing so we can now really combine
these two things so T13 and minus T14 rho 0 T0 minus T14 into P2 so P2 is common rho 0 C0 and
cot becomes tan cot becomes tan cot K0 LB and this guy becomes at Z is equal to L so and here
it is the same old business and here also divide by rho 0 C0 what we will sort of get is P2 is
common so cot goes in the numerator cot goes in the numerator so here we will have tan but I guess
I probably making a small mistake I realize now sorry it is a small mistake so here I think I
kind of did something very elementary mistake this cannot be this thing so here we have this
and similarly we have P2 my sincere apologies for the small error but we will sort it out now
in the this equation so basically what happens is rho 0 C0 still we would want rho 0 C0 so
basically we have minus minus plus so the only thing is that this guy would not be there you
just have a J sitting in here isn't it you just have a J sitting in here so rho 0 C0 is multiplied
by U2 at Z is equal to 0 this comes a denominator J so J times cot K0 L and goes in the numerator
so it becomes it becomes really tan later on and here also we can simply sort of get rid of this
guy and this obviously a J sitting in here which I also forgot my apologies again but I will make
amends minus sign is taken that is correct and what it would really mean is that coming back
from this equation minus T14 times P2 and this thing so cot you know goes in the numerator it
becomes tan and J is multiplied in the numerator denominator becomes minus J so it becomes so and
obviously we need to get rid of this guy not quite correct so going back and checking things minus
T14 times this so cot becomes tan as we can clearly see here and T14 is multiplied by tan and P2 is
taken out common J is a denominator J multiplied by J so it becomes minus J because minus J square
is there so this is all good similarly for the second equation is also alright so we have this
my sincere apologies once again for the elementary mistake here but this is what we get so things are
looking good they are looking sort of a bit more manageable this is your 2 cross 3 this is 3 cross
1 matrix so all good now we still have a bit more work to do because this is mind you at Z is equal
to 0 and this is at Z is equal to L so these this variable is different from this one in the sense
that we are relating things at different sections. So what do we do now basically let us sort of
write it down and you know we would basically eliminate you know kind of P2 at Z is equal to
0 from using either of the relations so let us use the third row thing so P2 at Z is equal to 0 is
T31 P1 tilde I am just dropping the tilde sign for now it is more convenient to do so here T32
rho 0 C0 U1 and T3 is taken common minus T34 minus I am sorry this is also T34 so minus T34
times J, J is in the denominator so actually it will become actually plus here plus here because
J is multiplied J square minus minus minus is cancelled so you get basically just J,
J times J times tan C0 LB or something like that so here also we get pretty much the same thing
but what we get is also J and this is this is J where J is root over minus 1 and this is this
thing and this guy sitting here basically what it would mean is that T34 times J times tan C0 LB
that needs to be added to this guy to get us P2 so this is all at Z is equal to so we have this
sort of relation now we can directly use this guy put it here I mean put the right hand side I mean
this thing this entire thing here and expand it out and then we can completely eliminate but be
prepared for a rather nasty algebraic simplification so it does require some work so what we would do
is write down the set of equations so P2 tilde at Z is equal to 0 we can just directly copy this guy
T31 P1 plus T32 rho 0 C0 u1 plus T33 plus J times tan K0 LB times T34 and this is multiplied by P2
I believe yes P2 so this thing is divided by J cot K0 LA J times cot K0 LA so we just simply
copied P2 what we got from this equation here into this guy in the numerator and this divide by J
cot K0 LB so there is no problem with the minus sign here and once we do that we would just keep
it aside for the time being and go back perhaps to this equation and expand this out completely
so now all these variables mind you at Z is equal to L and we have to you know patiently term by
term multiply P1 and everything is at Z is equal to L and T43 plus J times T43 you know here it
is the same thing minus is there so multiplied by J J square minus minus minus cancelled J times tan
K0 LB J times tan K0 LB times T44 is what you get and P2 is again taken common okay so we get
this this should be abundantly clear so now and I think I would like to drop off this term because
it is understood that all the variables in this equation are at Z is equal to L section so how
about I sort of just multiply throughout with J cot K0 L and then go about simplifying things so
with the idea that you know this thing P2 has to be expressed in terms of this thing so we could
do that so basically what it would mean let me do it on another piece of another slide so the
idea is that you know this minus J times tan K0 LA into T31 minus T41 times P1 tilde is divided
by X1 and similarly your the other term that is your plus rho 0 C0 U1 times in the bracket
is negative minus J tan K0 LA T32 minus T42 is divided by X1 okay so we get this P2 thing isn't
it we get this P2 thing so this entire thing this entire expression let me call this equation 2 is
being it has to be substituted in place of this thing okay and then we again regroup terms in
terms of P1 and rho 0 C0 U1 so it becomes you know as you can see it is already getting quite
complicated we it is a good idea maybe to involve you know computer algebra like for example Maple
or something like that to simplify matters or at least just write a MATLAB code and let the code
do all the simplifications for a given frequency so we could do that and eventually what we would
do I mean once we get P2 in terms of big expression that we just discussed now we regroup and at the
end of the day we will get a simplified well notionally it is simplified analysis it is
basically your P1 tilde rho 0 C0 U1 in terms of the T1 matrix so T1 matrix is different from here
T just the T matrix it is this thing rho 0 C0 U1 at Z is equal to L and this is Z is equal to 0 okay
so at the end of the day what we have done we have related things just at the point here see
the point at you know 0 to the point at L taking into account all the complex things that happen
in this annular region and the propagation that coupling due to this thing obviously these two
regions are uniform so it would not matter much so it would not matter at all apart from change
in phase so here to here we have related the transfer matrix and using once we get the steam
matrix we can sort of do a lot of things we can find out the transmission loss expression you use
the steam equation for transmission loss as that use for the classical state variables to get the
stuff now you know what really we have to do from now is that if you have more complicated things
like cross flow expansion chamber and all that I will in the next class I will probably up maybe
next to next class these are lectures 1 and 2 of week 8 so in the lecture 4 perhaps I would
about other expansion elements what I am going to do tomorrow I mean in the lecture 3 is you
know evaluate do some MATLAB demonstration basically I will and actually before I do
that I will talk about some present some popularly used perforate impedance expression that is
available in the literature a very brief historical review or probably just mentioning some important
ones you know starting from the work by Ingard and Munjal and Selamet and other guys Elnadi and
they have been lot of expressions so I will kind of present those expressions to you and the
situations in which they have to be used only for the case of well grazing flow that is what
we are dealing here let us remind ourselves we are dealing with only grazing flow so I will
present those expressions and some of them actually involve mean flow some of them do
not really involve mean flow but they have other effects well once we do that we would
go to a MATLAB code and type in the appropriate perforate impedance expression zeta what we
have been figuring it out in the T matrix and which is in inherently presented and incorporate
all the boundary conditions and possibly analyze your fully perforated CTR with and without
flow and also present the analysis of CTR with extensions at the inlet and outlet neck
extensions are extended inlet and outlet the perforated bridge without flow but in this
case I had also introduced some empirical expressions for end corrections which is popular
and then possibly do some mean flow parametric studies I guess but there is lots to be done
even after doing that because this is one of the basic elements so you know let us get
sorted out with this first and possibly in tomorrow's lecture that is lecture three
and also involving perhaps lecture four may be lecture three and four would be combined
and then we will see what we will do in the lecture five for this week so till that time
stay tuned and I will see you in the next class.
