noc18-me58 Lec 12-Transformation of stiffness and compliances matrices

IIT Kanpur July 201
20 followers
Dec 2, 2023
Hello, welcome to advanced composites. Today is the last day of the second week of this
particular course. Yesterday, we just developed a relation between stresses and strains in
a specially orthotropic material loaded in a plane stress condition in a situation in
a general reference frame. So, there we were not specifically aligned to a particular material
axis system, we were just making sure that the material is orthotropic and it is thin
and because it is thin, it will have a plane stress condition. And for that condition,
the relationship between stresses and strains in a general x y coordinate system, we had
expressed was this sigma with respect to x y coordinate system equals Q bar matrix
times the strain vector with respect to x y coordinate system. And to recap, Q bar matrix
is nothing but inverse of transformation matrix T 1 times Q matrix times transformation
matrix T 2. So, we know what exactly T 1 matrix is. So, we can take its inverse, we know what
is T 2 matrix and if we do all the computation, the relationship between Q bars and Q's
come out like this. So, Q 1 1 bar equals Q v 1 1 times cosine 4 theta. So, C means
cosine and S means sin theta. So, Q 1 1 is equal to Q 1 1 bar times cosine 4 theta plus
Q 2 2 sin 4 theta plus 2 Q 1 2 plus 2 Q 6 6 times sin square theta cosine square theta.
Similarly, Q 2 2 bar is equal to Q 1 1 sin 4 theta plus Q 2 2 cosine 4 theta plus 2 times
this entire expression times sin square theta cosine square theta. And Q 1 2 bar equals
sin square theta. So, Q 1 2 bar is equal to Q 1 2 Q 1 1 plus Q 2 2 minus 4 Q 6 6 times
sin square theta cosine square theta plus Q 1 2 cosine 4 theta plus sin 4 theta.
Now the Q matrix was having Q 1 6 and Q 2 6 as 0, but in the Q bar matrix Q 1 6 bar
is not 0. So, I will write down the expression for that. So, that equals Q 1 1 minus Q 1
2 minus 2 Q 6 6 cosine cube theta sin minus Q 2 2 minus Q 1 2 minus 2 Q 6 6 cosine theta
sin cube theta. And Q 2 6 bar equals the same thing, but it is cosine theta sin cube
theta minus same terms in this bracket and this is cosine cube theta sin theta. And finally,
the expression for Q 6 6 bar. So, that equals Q 1 1 plus Q 2 2 minus twice Q 1 2 minus twice
Q 6 6 sin square cosine square plus Q 6 6 times sin 4 theta plus cosine 4 theta ok.
And we will spend a couple of minutes looking at these expressions and I will make some
observations. Q 1 1 and Q 2 2 and also Q 1 2 their values do not change if I change the
value of theta from plus theta to minus theta, because how are they dependent on theta they
are dependent cosine 4 theta. So, if I change from cosine 4 theta to cosine 4 of minus theta
it is the same value sin 4 theta sin square theta cosine square theta. The same is also
true for Q 6 6 it is also true for Q 6 6 its value also does not change if I switch my
theta to minus theta. So, if theta is 30 degrees and in the other case if it is minus 30 degrees
the values of Q 1 1 bar Q 2 2 bar Q 1 2 bar and Q 6 6 bar they do not change they remain
same, but. So, these are even functions of theta. So, these are even in theta this is
also even in theta, but Q 1 6 bar and Q 2 6 bar let us look at these.
So, when I change from theta degrees to minus theta degrees cosine Q does not change because
cosine of positive theta and negative theta is the same, but sin theta changes sin theta
changes to negative sin theta. Similarly the sin cube theta also changes. So, for this
reason Q 1 6 bar and Q 2 6 bar are odd functions in theta. The other thing I would like to
say is that because Q 1 6 bar and Q 2 6 bar they are not necessarily 0 this mathematically
implies that extensional strains or extensional stresses they can generate shear strains and
shear stresses they can generate extensional strains and vice versa.
This was not the case for specially thermo orthotropic material because Q 1 6 and Q 2
are 0, but once we move to the land of general orthotropy then there is a coupling between
shear and extensional effects. So, if you have a rectangular sample and you pull it
it will not only become longer, but will it will also deform and it is angles at the corners
will change from 90 degrees to something different and it is important to note that the direction
of this coupling is sensitive to theta. So, if you change from positive theta to negative
theta is direction reverses direction reverses because Q 1 6 and Q 2 6 bar are odd functions
of theta. So, it is important to get our conventions right. So, whenever we measure theta this
is the convention we follow otherwise we will not get our shear strains and things
like that or we will not get our solutions correct because of the sensitivity of Q 1
6 bar and Q 2 6 bar to the direction of theta. So, we should be clear on our conventions
which are consistent with the conventions we have used in this formulation.
So, I can once again write my stress vector in x y coordinate system as Q bar matrix times
the strain vector. If I multiply both sides of this equation by inverse of Q bar matrix
then I can express strain in terms of in terms of a compliance matrix and stress. So, this
gives me strain vector is equal to S bar matrix times stress vector. So, S bar is compliance
matrix and it is nothing but inverse of Q bar. So, the mathematical relation between
different Q bars and S bars is this. So, this is equal to S 1 1 C 4 plus S 2 2 S 4
plus 2 S 1 2 plus S 6 6 S square C square S 2 2 bar equals S 1 1 S 4 plus S 2 2 C 4
plus 2 this entire thing S square C square and S 1 2 bar equals S 1 1 plus S 2 2 S 6
plus S square C square plus S 1 2 times C 4 plus S 4 and then S 6 6 is equal to twice
of twice of S 1 1 plus 2 of S 2 2 minus 4 of S 1 2 minus S 6 6 cosine square sine square
plus S 6 6 cosine 4 plus sine 4 S 1 6 bar equals 2 S 1 1 minus 2 S 1 2 minus S 6 6 cosine
cube theta sine minus 2 S 2 2 minus 2 S 1 2. So, there is a small error here this is
2 in bracket. So, it is 2 minus S 6 6 cosine sine cube and S 2 6 bar equals the same thing
times sine cube cosine minus this thing sine cosine cube. So, once again we see that S
1 1 bar, S 2 2 bar, S 1 2 bar and S 6 6 bar they are all even in theta while these two
guys S 1 6 bar and S 2 6 bar they are all odd in theta. So, it is important to understand
that. Lastly I will write stress strain relationships between stress and strain
relationships in terms of engineering constants. So, those relationships are given here epsilon x,
epsilon y, gamma x y equals 1 over E x minus nu x y over E y minus m x over E l minus nu x y over
E x 1 over E y and minus m y over E l and this is minus m x over E l minus m y over E l and 1
over g x y times sigma x sigma y tau x y. So, these are the stress strain relationship
for a generally orthotropic material which is in a state of plane stress in terms of
engineering constants you know engineering stiffness constants of the material which
are E x E y E l m x m y and so on and so forth. So, here m x and m y if these terms were 0
then there will not be any shear extensional coupling. So, these are the cross coefficients
these are called cross coefficients and what do they do they once again they couple the
extensional response to the shear response and vice versa.
The relationships for E x E y nu x y g x y m x m y. So, these 6 we have already explained
these relationships in our previous course. So, you please go back and refer to that and
you will find the relation. So, that E x E y nu x y g x y m x m y all of these things
can be calculated in terms of E l E t g l t nu l t and the transformation angle theta.
So, even though these are 6 constants, but they can be expressed in terms of these 4
fundamentally independent constants for this orthotropic material under plane stress state.
So, that concludes our discussion for today and also the content which I wanted to cover
in this week. I hope you have a wonderful weekend. If you have any questions please
do send us emails and next week we will move on to another topic where we will start discussing
the behavior of laminates in terms of these constants and how we can relate the stresses
and strains in case of laminates. So, with that I conclude our discussion have
a great day and a wonderful weekend. Thank you.
