noc18-mm20 lecture 02-Basic Thermodynamics:Gibbs Free energy

IIT Kanpur July 201
20 followers
Dec 2, 2023
In the first lecture, we just learnt about some basic definitions related to essential
thermodynamics that will make us understand phase equilibria. So, in this lecture we will
again continue building on that and we will see some more thermodynamic correlations.
So, we were studying about how phase equilibria is an important understanding phase transformation.
For example, I gave you the example of water in which H2O molecules go from, H2O molecules
are present in liquid phase at temperatures lower than 100 degree centigrade, but as you
go beyond 100 degree centigrade, they transform into gaseous phase.
And the reason for that lies in the thermodynamically equilibrium, because at higher temperature
the vapour phase in the equilibrium state, whereas at lower temperature the liquid phase
is in the equilibrium state. And this is determined by what we call as free energy, the free energy
of liquid phase is lower at lower temperatures as compared to vapour phase, whereas converse
is true at high temperatures.
So, now let us look at the aspects related to phase stability. So, we look at what we
call as phase stability, phase stability basically is determined by thermodynamics
and in particular. So, basically what we are looking at, at a given condition of given
temperature, pressure and composition what are the stable phases and this is what is
phase equilibria. So, let us first define the term called as
free energy. So, I assume that you have basic knowledge of elementary thermodynamics, which
is useful to understand the course. So, free energy, so at a constant at a given temperature
and pressure as well as composition, free energy G, this is G determines the phase stability
for an alloy. And G is called as Gibbs free energy and this G is written as, G is written
as H minus T S. So, H is called as enthalpy, T is the temperature and S is called as entropy.
So, let now just let us just look at the definitions of these components. So, let us first look
at what is enthalpy. So, enthalpy is essentially defined as H, it is essentially defined as
heat content of a given system and H is defined as further U plus P V, where U is the internal
energy, P is the pressure and V is volume. And this U essentially, so basically it is
that enthalpy you can say the total energy in built in a system, which consists of the
internal energy and which consists of the pressure and volume terms, the net amount
of work which is done by the system or on the system and that will determine the total
heat content of the system. So, let us now first look at the internal
energy. So, this U is basically sum of all the kinetic energy contributions and all the
potential energy contributions. So, kinetic energy may arise from let us say a atomic
vibrations, b it could be due to. So, atomic vibrations in both solid and liquid phase,
it could be because of translational and rotational energies of atoms or molecules. So, it again
could be within the liquid phase or gas phase, generally these are more of significant liquid
and gas phase, whereas atomic vibrations are more in gaseous phase. So, this is the kinetic
energy term. So, the potential energy term on the other hand is written as follows. So,
this is potential energy term is potential energy P e, which is because of which is due
to bonding, it is also because of atomic or molecular interactions, because it may not
be only bonding, it could be various other things which is hybridization and things like
that interactions in a system. So, this is what the total energy now will be. So, you
have kinetic energy and then you have potential energy.
Now, let us look at the total energy is equal to kinetic energy plus potential energy. The
kinetic energy is because of atomic vibrations and which are basically, which could be in
solid and liquid both forms as well as translational and rotational energies of atoms and molecules,
whereas potential energy is because of as I wrote just now is because of bonding and
inter atomic interactions. So, this gives rise to total energy. So, total energy now
would be K e plus P e. So, basically as you change the temperature, the internal energy
increases. Now, why does it happen like that? So, when you go from for example, water to
vapour for instance, water to vapour essentially you go from low temperature to high temperature
and basically you are adding heat to the system. So, your internal energy will go up as you
go from water to vapour. Similarly, let us say if you heat a solid, you increase its
energy because you add heat. Similarly, if you heat for example, let us say tungsten
filament bulb, the tungsten filament becomes red hot and which means its internal energy
increases and as it cools out its internal energy decreases.
So, now if I just give you the signs of these energies. So, if you have let us say a system
and then you have surroundings and so basically if you do. So, this is let us say on this
side you write work, on this side you write heat. So, if work is done on to the system
then delta E is delta U, let us say delta U is positive and if you do work, if system
does the work then delta E is negative. On the other hand in terms of heat, if system
releases the heat then delta E is negative and if system absorbs the heat then delta
E is positive. So, that is how you distinguish between various states of the system as you
decrease or increase the temperature. Now, second thing that we talk about is the
P v term. The P v term is of importance because phase changes are affected by the change in
the volume or the pressure. So, when we say h, so this P when we say h is equal to U plus
P v. So, it is this term which adds or which adds or which becomes plus or minus as depending
upon the what the magnitude of this term is. So, basically for mostly condensed phases,
in general for condensed phases, condensed phases by this I mean generally liquids and
solids the delta P v term is generally very small and hence it is generally neglected.
So, for condensed phases generally h is nearly equal to you can say U, if this delta P v
term is very small. And finally, we come to the third term in G minus T S that is that
is what is called as entropy. And this entropy is nothing but a measure of randomness, measure
of randomness or measure of disorder of species within a given system. And this is this again
has a strong bearing on the overall stability of the system. So, as now we come to the first
expression again G is equal to h minus T S, the free energy of a given phase is affected
by the overall heat content h, which is equal to U plus P v. In most cases it is equal to
U for solid phases and then T S term. So, whether enthalpy increases or decreases
or the entropy term increases or decreases under given set of thermodynamic conditions
will determine, whether G will increase or decrease as a function of temperature or pressure
for a given system. Now, let us look at the definition of what we call as equilibrium. So,
what is equilibrium? Equilibrium is defined by generally we defined as equilibrium as in the
context of materials, the most stable state that is no change happens if you leave the system on
its own under given set of parameters. So, basically the you can defined equilibrium
as most stable state of a system under given set of temperature, pressure and composition. So,
basically T and P you can you can define these are constant then d G is equal to 0 and what it
means is that free energy has a minimum under those conditions. So, generally if you look at
again G is equal to H minus T S. So, G so G will decrease when H is small. So, if you decrease H
your G will decrease and when you increase entropy G will decrease because there is a negative term.
So, generally speaking the free energy free energy decreases when enthalpy decreases or
entropy increases because minus T S term goes as negative and H term of course, it
has to decrease for the, but overall it is a combination of these two which will govern
whether free energy will increase or decrease for a given system. And generally what we
are interested in knowing what is the relative change in free energy for given phases. So,
it might happen that you have two phases and as the function of temperature the free energy
of both phases decreases, but if the decrease in the free energy for one phase is happening
at a higher rate as compared to the other phase. Then we may come across a temperature
at which the free energy of the phase for which the free energy decrease rate was higher
may lead to lower free energy as compared to the other phase. So, we will see those
changes later on. So, generally. So, let us say at lower temperatures generally what
happens is that at lower temperatures basically at lower temperatures you have higher atomic
interactions and higher atomic interactions will lead to higher binding stronger binding
and this generally leads to low or more negative you can say internal energy. Because and that
is why solids have lower internal energy or more negative internal energy as compared
to the liquid gases have if you compare solid liquid and gases solid will have the most
negative internal energy whereas, liquids and gases will have higher more positive internal
energy as compared to the solid. So, as a result generally because of this
in decrease in the internal energy or negative internal energy of the solids solid phases
are more stable at lower temperatures. So, we can say if you go to p y this is what makes
solids stable whereas, at higher temperature converse happens at higher temperatures your
solids have your liquid and gases have although they have. So, if you look at higher temperatures
higher temperature we see generally liquids are stable right this happen is equal to h
minus T s although their h is positive although there is more although the h is more positive
as compared to the solid the entropy is higher. So, again this entropy term dominates this
term dominates over the h term. So, h increases, but s also increases. So, the competition
between these two makes lower than G s whereas, at temperatures G s is lower than G l in general.
So, we will we will look at various systems a few systems later on. So, at higher temperature
term dominates lower temperature the enthalpy term dominates giving rise to stability of
solids and liquids at lower and higher temperatures. Similarly, you have pressure volume effect
as well as we said generally pressure volume effects are not generally considered, but
however, if they are present they have to be considered.
And hence the systems with a smaller volumes are preferred as compared to system with higher
volumes because of lowering of p v term. So, if you look at this h h is u plus p v. So,
this volume term comes into picture at a given pressure if you have two phases the phase
with a smaller volume will be preferred as compared to phase with higher volume and this
is because of changes in the corresponding changes in enthalpy. So, if your enthalpy
has to at higher. So, if you have two phases another one phase with lower volume that will
have lower enthalpy as compared to the phase with higher volume. So, more negative enthalpy
has to be will be preferred or lower enthalpy will be preferred as compared to the as compared
to the other phase. So, when we define equilibrium in totality
the equilibrium in totality is defined as you have you plot g as a function of let us
say arrangement of atoms. So, if I make a plot of this. So, this is for example, the
situation you have a state a and you have a state b. So, you can see that there are
two minima here. So, d g for this is also 0 d g for this is also 0. However, in totality
if you look at that free energy landscape this b state has lower energy as compared
to. So, this is let us say g b and this is let us say g a. So, g b is more stable at
equilibrium because g b is lower than g a. So, if you leave the system for long time
to achieve equilibrium system will move towards achieving g b. However, in many systems such
as in glasses there are or in polymers there are metastable states which have local minima.
So, this local minima is often stable because this is also at an energy which is which is
small at a at this arrangement. However, to reach from here to here it has to overcome
energy barrier. So, this is energy barrier delta let us say q this energy has to be overcome
for system to again achieve a low energy state. So, as a result typically some sort of impetus
has to be provided for system to move from this state to that state. So, this happens
generally in glasses in glasses there are local minima in energy and the system stays
in that energy because the delta q can be quite large for system to achieve the proper
equilibrium. However, for many crystalline systems for many solids the minima is achieved
quite fast. So, minima how fast or how slow minima is achieved that is determined by the
kinetics or the time dependent rate processes within the system, but generally the tendency
of a system if you leave it enough for long enough time it will achieve the equilibrium
with lowest free energy state. So, for example, if I give you I will give you the example
of diamond a carbon. So, carbon if you leave it for long time the thermodynamic state stable
state of carbon is it has two forms one is graphite second is diamond. Diamond is the
metastable form graphite is a stable form, but we do see diamond exists we do see that
diamond exists and however, if you leave diamond long time for very long time diamond will
eventually convert to graphite. So, if you, but the process is so slow that
for virtually for very long times for virtually for eternity the diamond is appears as if
it is stable, but within size of earth the timeline of earth is very long as a result
the phase transformation that happen from diamond and graphite they do not happen in
our lifetime they take millennia's to for them to happen. Similarly, glasses the crystalline
glass is more stable as compared to amorphous glass, but what we see in front of us is mostly
amorphous glass because the time scales at which amorphous glass is convert into crystalline
glass are huge they are they are way beyond our imagination. So, that is why you see these
metastable states appear to us as if they are the stable phases. However, since these
are local minima's and free energy which are not absolute minimum as a result they are
that is why they are called as metastable states which do exist for long times in front
of us. So, we will stop here today what we have learnt
is basically in this lecture if you if you go from the beginning we learnt the concept
of free energy what free energy is what are the terms which are included in free energy.
So, free energy is required to understand the phase stability and free energy consists
of three terms enthalpy temperature and entropy enthalpy is basically the heat content of
the system. So, heat content depends upon the internal energy in the p v term by and
large it is governed by internal energy itself. So, internal energy is sum of potential energy
and kinetic energy and these are kinetic energy comes from atomic vibrations and translation
rotational energy of atoms molecules whereas, potential energy is primarily because of binding
between the molecules. So, it is a competition between enthalpy and entropy which gives rise
to eventual lowering of free energy in the system determining the final phase stability
entropy as I said is the measure of randomness of a given system. So, in the next few lectures
we will again expand on these and establish a basis of phase equilibrium.
Thank you.
