noc18-bt26-Lecture 09-Radio-telemetry

IIT Kanpur July 201
20 followers
Dec 2, 2023
Radio-telemetry
In today's lecture, we will have a look at radio telemetry, which is a technique to
monitor individual animals or groups of them using radio waves.
So, coming to the preliminaries, radio telemetry consists of this word telemetry, tele means
distance.
So, this is the same thing that goes in words like telescope, which is looking at a distance,
telephone, which is talking at a distance, television, which is seeing at a distance
and so on.
So, tele means distance.
Then metry, it comes from the word metron, which means to measure or measurement.
So, metry would come in photogrammetry, which is measurements using photographs or it can
come in trigonometry, which is measurements using triangles and so on.
So, telemetry means to measure at a distance.
So, coming back to the slides, we have the word roots, distance and measurement.
So, telemetry is the process of recording and transmitting the readings of an instrument,
which is measurement.
So, we are measuring something with an instrument and you are recording and transmitting the
readings of the instrument at a distance.
And radio telemetry is telemetry that is done using radio waves.
So, in the context of wildlife management, radio telemetry refers to the tracking of
wild animals through use of sensors, transmitters and receivers.
So, we have a sensor that is placed with the animal, a transmitter which again is placed
with the animal and then those signals that are given out by the transmitter are then
received by us and we make use of that information.
So, there are three formats in which radio telemetry is classically done.
So, the first is VHF radio tracking.
So, VHF stands for very high frequency.
So, these are radio waves at very high frequency that we use to track the animals.
The second is GPS tracking and the third is GPS plus satellite combination tracking.
Now, GPS stands for Global Positioning System.
So, this is a system that consists of a number of satellites that are revolving around the
earth.
And we use these satellites to get our position and that position can either be recorded inside
the collars that is put to an animal in the case of GPS tracking or this signal can be
transmitted using satellite, so that we can get these data points at a distance.
So, let us begin with telecommunication.
Now, telecommunication in the case of radio telemetry, it consists of three parts.
We have a transmitter, we have a receiving antenna and we have a receiver.
When we look at a VHF transmitter, so the transmitter is fitted to the animal through
a collar and it transmits radio signals at in the very high frequency spectrum.
So, what is the collar?
So, this is a tiger that we saw in Panna and this is the head of the tiger, this is the
body of the tiger, this is the neck of the tiger.
And on this neck, we can see this black colored strip which is collar.
Now, a collar is a device that is used to harness our equipments to the animal.
So, this is our transmitter.
So, this collar consists of a transmitter and a transmitter essentially consists of
four components.
So, one component as we have seen is the attachment method which is the collar, then this transmitter
requires a power source which is a battery, then it consists of an electronics package
consisting of a circuit board and crystal oscillators and it also consists of a transmitting
antenna.
So, these four things put together form our transmitter.
Essentially, we said that in the case of transmission, we had three things.
One is a transmitter.
Now, a transmitter consists of four parts.
We have a collar that is used to attach it to the animal, we have a battery, we have
electronics, and we have a transmitting antenna.
So, this is our transmitter.
The next component is our receiving antenna.
Now, in the case of receiving antenna, coming back to the slide, so, single or multiple
antenna can may be used when we are receiving the signals that have been transmitted by
the transmitter section.
Yagi antenna are preferred due to their robust design and directionality.
So, we will come to Yagi antenna in a short while.
The antenna are connected to the receiver through a coaxial cable.
So, this is how a receiving antenna looks like.
So, we have this antenna which is a directional antenna and we hold it like this, so that
on the top there is a pole and this pole can give us the direction.
So, essentially you have an antenna like this and the direction is given by the direction
of this top rod.
So, here we have this top rod that gives us the direction.
This cable that we can see here is the coaxial cable.
So, this antenna is connected to the receiver using this coaxial cable.
This is the direction of the antenna and these horizontal bars give us extra sensitivity.
So, the antenna can be used in two fashions.
So, receiving antenna we generally have Yagi antenna.
So, these are the most common antenna, but we can also go for some other antenna and
these can be used in two fashions.
One is a top mode and the second is in eye fashion.
So, in the top mode you have this top and then we have these antenna and here we have
the coaxial cable and this gives us the direction.
So, the direction tells us the position of the transmitter and this is our handle.
Now in the eye fashion, coming back to the slides, the antenna may also be used in an
eye fashion for improved directionality at the cost of reduced sensitivity.
So, essentially what it says is that when you are at a distance from the animal.
So, essentially you are here, this is the animal with the transmitter.
So, when you are at a great distance, you will use your antenna like this.
So, this will give you the direction of animal, but because at a large distance, you are at
this distance of d, your signal is less.
So, you have signal is to noise is less.
So, essentially we want a greater sensitivity even at the cost of directionality, we want
a greater sensitivity because we want to detect that animal and we want to have an approximate
location or an approximate direction of that animal.
So, we increase the gain in the equipment.
So, gain is essentially a digital amplification of the signal by and also reduction of noise,
but once you have come close to the animal.
So, say at this distance of d 2.
So, at this distance, the amount of signals that you are getting from the transmitter
is large.
So, at this distance, you will put your antenna in an eye fashion.
So, this is the eye fashion.
So, this looks like our alphabet I.
So, at this point and this is our coaxial cable.
So, in this fashion, when the antenna is used, then it does not have a high sensitivity
because we do not require a high sensitivity because as such the level of signal is very
high because of our closeness to the animals.
The directionality is improved a lot.
So, essentially you can very easily pinpoint the direction of the animal at the closer
distances.
Now, the next thing is a receiver.
Now, receivers are devices that help isolate the frequency of the transmitter and depict
it in the form of an audible pulse or the movement of a needle.
Receivers often deploy digital signal processing and filters to improve the signal to noise
ratio.
They may also have a data logging unit.
So, this is how a receiver looks like.
So, we had an antenna to which a coaxial cable was connected and this cable is then connected
to the receiver.
Now, this receiver would be having some set frequencies which we can select using these
numbers.
So, these are some preset frequencies because we have a number of animals in the field.
So, every animal can be given a different collar which gives out a different frequency
and we can select those frequencies by these numbers.
Now, there is a tuning knob through which we can fine tune the signal.
So, say if it is giving out at a frequency of say X hertz.
So, this X hertz can be increased by, can be increased or decreased by very small values,
so that we can pinpoint the exact frequency that is given out by the transmitter.
And then we also have a knob for gain.
So, gain is essentially your digital amplification of the signal.
So, when you increase this gain to a higher value, you will be able to hear a loud pulse.
When you decrease it, you will be able to hear a very moderate pulse.
How do we use this device to locate the animals in the field?
So, you have a tiger which is wearing a collar.
This collar is giving out some set frequency and now you have your antenna and you have
your receiver and you want to locate where this tiger is.
To determine the position of the collared animal, two methods can be deployed.
One is called triangulation and the second is called homing.
Now, in the method of triangulation, the operator stands at a certain location and moves the
antenna to the direction where the signal is the strongest.
This directional bearing is noted using a compass.
Then the operator moves to a second location and repeats the process with the two locations
defining the base vertices of the triangle with the side length of d and the two angles
alpha and beta discerned from the compass bearings.
The third vertex can be computed.
This vertex is the position of the collared animal and in practice multiple locations
and multiple bearings are used to reduce the error in positioning of the animal.
So, this is how it looks in the field.
So, there is an animal somewhere out there.
So, you stand at one position, you take, you move your antenna to a direction at which
the level of the signal that is received from the transmitter is the highest.
So, you are getting a very loud sized pulse like beep, beep, beep.
So, at that direction you note the bearing of this antenna using a compass and then you
go to another location and repeat the process.
So, essentially what we are doing here is that you have an animal somewhere here, you
are standing at location A. At this location you moved your antenna to the direction where
you have the highest signal.
So, you get this angle alpha.
So, this angle is generally taken in the form of a bearing.
So, a bearing means that when you have a compass.
So, you have north, south, east and west.
So, if you are getting this angle, you will write it as say north 45 east, which means
that you are talking about this angle and from this angle, so, this is your 45 degrees.
From this angle you can compute this angle very easily.
So, this again will be 45 degrees and you are getting the value of alpha is 45 degrees.
Then you move to another location B and at this location you again find out the direction
of the animal from this location.
And here you get an angle of beta, say beta is equal to 60 degrees.
Now, you come back, you plot your locations.
So, we can have a GPS reading, a GPS reading will give us the latitude and longitude of
point A and similarly a lat long for point B. Once you have these lat longs, you can
come back and plot both of these locations on a map.
Once you have plotted them out, you can draw a straight line and then on this straight
line you can draw these two lines with the same angles alpha and beta.
And once you have done, the point where these two intersect is the location of the animal.
It is easy to see it in theory, but in practice, remember that this triangulation is being
done at large distances.
Now, at large distances, when you are using your antenna in this fashion, you are holding
it up.
So, you have a high sensitivity of the antenna, but directionality is not that good.
So, essentially when we are seeing an angle of 45 degrees, this could be say 40 degrees
or this could be as much as 50 degrees.
So, in that case, you can draw two lines.
So, one is for 40 degrees and one is for 50 degrees.
So, here you have these two rays.
Similarly, at position B, you have these two rays, just because your directionality is
not that good.
So, in that case, your animals can be anywhere within this quadrilateral.
Now, to know the exact location of the animal, we can employ two techniques.
One is that we can just draw these two lines joining the opposite vertices or the two diagonals.
Then we will say that this point where both these diagonals are meeting is our location
of the animal, but then this is just an approximate location.
To get a better location, what we can do is, in place of taking just two points, we also
take a third point.
So, this point is C. Now, at this point, again we noted the bearing of the animal.
Again there will be level of uncertainty, but what it has done is that in place of using
this whole of, the whole of this quadrilateral, we have removed these locations.
So, this, these two locations are now gone.
So, we only have this smaller polygon from which we need to get the, which represents
the location of the animal.
Then we can take another point, say this point D. In this point, again we have a bearing.
But there is an error involved.
So, now we have reduced our polygon even further.
So, essentially now our animal is somewhere within this smaller polygon.
So, by taking more and more points, we reduce the errors that are there in the location
of this animal.
If we took another point, say somewhere here, point E, then we would be able to reduce it
even further.
So, at each step, we are removing some portions of the polygon to get another smaller polygon
which gives us the location of the animal.
So, this is an iterative process which can go again and again till we reach a level of
accuracy that is good enough for us.
The second way in which we locate the animal is through homing.
Now in this method, the operator stands at a certain position and moves the antenna to
the direction where the signal is the strongest.
Then keeping the direction fixed, he or she starts moving towards the animal.
As the distance to the animal reduces, the signal intensity increases and louder beeps
are heard.
These are then compensated by reducing the gain in the receiver.
At very close distances, the antenna may be deployed in the shape of alphabet I, which
is the I shaped fashion, or the antenna may be removed and just the coaxial connection
used as an antenna.
In this manner, the operator is able to reach the animal through homing.
Now, what we are doing in this case is that we have this animal here.
So, this is our location of the animal.
We are at this location.
So, this is the position of the observer.
So, we used our antenna in the vertical fashion.
So, we hold our antenna like this and then we turn it around.
We get an approximate directionality at which the beeps are the loudest.
So, suppose we got it as, so this is our actual directionality which should come, but because
of the errors, we make this assumption that our animal is somewhere between these two
lines.
So, between these two rays, let us call it OA1 and OA2.
So, our animal is somewhere between these two lines OA1 and OA2.
So, now what we do is, we move closer to the animal.
So, we start moving along this line, then at this point, we repeat the process.
So, at this point, we again get this bearing and then somewhere with our errors, it goes
something like this.
Then we repeat the process, we get to another point.
Now, once we have moved from the position O to O1 and then to O2, now at this position
O2, the signals that are coming from our animal are very high, because of our closeness to
the animal.
So, at point O2, probably our beeps are very loud, so they are beep, beep, beep.
So, in that situation, we reduce the gain, then we go on repeating this process.
So, after a while, we have reached so close to the animal, that even the antenna is not
required.
So, we take out the antenna, we just use the coaxial cables.
So, we hold it in our hands like this and then we try to figure out what is the direction
of the animal, or else we can use our antenna in the eye fashion.
So, in the eye fashion, we hold it like this horizontally.
So, it does not have a very high sensitivity, but it has a very good directionality.
So, once we have done that, so we are able to pinpoint the location with very less error.
And just by repeating this process again and again and again, we will be able to reach
the animal, which is the position of the animal.
Now, you might think that this is a tiger which is wearing a collar, so how can somebody
go so close to the animal.
Now, of course, when you are doing an exercise in homing, you do not walk on foot most of
the times, when you are having an animal like tiger that you are trying to home into,
you move on an elephant back, so that you are safe.
But in the case of other animals, because these collars are not just specific to tigers,
you can also put it on a barra finga or you can put it on a chitil or on a sambar.
So, once you have these herbivores, it is very easy to go very close to the animal.
Now, why would you want to go so close to the animal?
Now, in certain circumstances, it might be required to immobilize this animal.
So, basically you have put this collar, this collar has a battery and every battery has
a battery life.
So, suppose this collar has a battery life of 3 years and you have already reached 2
and a half years.
So, now you think that in the next 6 months my collar will go off, so why not change the
battery.
So, when you want to change this battery, you will have to go back to the animal, you
will have to dart it.
So, darting and immobilization is something that we will cover in another module.
But essentially you are immobilizing this animal, so you shoot it with a chemical laden
dart, it becomes unconscious, you go there, you remove the collar, replace the battery
or put another collar and then put it on the animal.
So, in those circumstances, homing is extremely crucial.
Otherwise, in the case of tiger reserves, we also use homing in situations when some
tourist has told us that one of your tigers and has clicked our picture that one of your
call, your tigers which has a collar has become hurt because of say fighting with another
tiger, a territorial fight.
Now, in such a circumstance, it becomes very much essential to go to that tiger and its
level of hurt.
So, you will take a veterinarian to the tiger who will analyze its situation and then take
a decision whether these bones are going to heal on by themselves or whether we need to
perform some veterinary operations.
So, probably we would need to immobilize this tiger, then put some antibiotics or antiseptics,
clean up the wound or maybe even stretch it at times.
So, for those circumstances also homing becomes extremely crucial.
So, coming back to the slides, this is how a homing operation would look like.
So, you have an antenna, you are at a distance, this antenna gives you the direction of the
animal.
You take this antenna and you start moving towards the animal till you reach the animal.
Now, all these were regarding our VHF collars.
Another kind of collar is a GPS radio telemetry through collaring.
Now, what is GPS?
GPS stands for Global Positioning System.
Now, this system consists of a number of satellites and at any location on the earth, we can get
signals from a number of these satellites.
So, what we are trying to do in this case is, suppose we are there on the earth.
So, suppose this is our location and these are the four satellites that we are getting
our signals, these are the three satellites that we are getting our signals from.
So, we can measure our distances from all these three satellites.
So, let us call it D1, D2 and D3.
So, we know the positions of these satellites because they move in certain specific orbits
and once we have these three locations, what we are trying to do is, suppose this is our
first satellite and we are at a distance of D1 from it, we are at a distance of D1 from
satellite S1.
So, our position with respect to this satellite is given by this sphere on which we would
be there.
Now, if we have a second satellite and we are at a distance of D2 from the second satellite
S2.
So, our location would be given by this second sphere.
So, let us make it in red.
So, by using two satellites, so, we are on this sphere, sphere 1, S1 or let us call it
sphere 1.
So, we are somewhere on the surface of sphere 1 and we are somewhere on the surface of sphere
2, which would give us that our location is somewhere on this circle that is formed by
the intersection of these two spheres.
Now, if we have a third satellite, so, let us have this third satellite S3 and we are
at a certain distance from this third satellite given by a value of D3.
So, now, this satellite, the sphere that is formed by this satellite.
So, we are on the surface of sphere 1, sphere 2 and sphere 3.
So, now, an intersection of two spheres would give us a circle.
Now, this third sphere is going to cut the circle at two points.
So, this is point P1 and this is point P2.
So, we are at either point P1 or we are at point P2.
Now, because we are on the surface of the earth, so, suppose this is the surface of
the earth.
So, this is another sphere at, now, this is the center of the earth.
So, let us call it E and the radius of the earth is given by RE.
So, now, this also forms another fourth sphere.
Now, this sphere is going to intersect either this point P2 or it is going to intersect
point P1.
The other point will either be away from the sphere or it is going to be inside the sphere.
So, by using these four spheres, we can very accurately pinpoint that our location is P2.
So, a GPS satellite, essentially, when we are using a GPS satellite, we are finding
out our distances from different satellites and by knowing the positions of these satellites,
we are drawing a number of spheres and the intersection of those spheres and the intersection
of the earth gives us our location in the three dimensional space.
Now, GPS tracking is being deployed these days on the animals.
So, when we do that, we can use it in two modes.
So, we can have an animal which has a collar, that collar has a GPS receiving device and
that collar will find out the location of the animal and will go on recording it in
a data logger and then later on, we can go to the animal, we can dart it or we can program
our collar in a way that after a certain while, this collar drops off by itself.
So, once this collar has come out of the animal, we can go there, we can retrieve it back and
then we can take out the data from the GPS device which was there in the collar.
So, before proceeding further, let me show you how one of these GPS devices works.
So, we observed how using our handheld devices, we can get our positions in the form of latitudes,
longitudes as well as elevations.
Now, when we deploy a GPS device in the form of a collar, we tune our device in such a
way that these values of latitude, longitude and elevation are continuously logged in a
data logger that is connected with that device.
So, once we have deployed our collar for a specified period of time as is required, we
can then again go back to the animal using the process of homing.
Now, all these GPS collars also have a VHF transmitter attached to them.
So, we can always home into these animals along with getting these GPS signals.
Once we have gone to these animals, we can use a mechanism in which when we press a button
on our device, then it signals this collar to detach itself from the animal.
So, this collar will just drop off, it is called a drop off collar.
Once that is done, we can go retrieve that collar and then from its data logger, we can
get all the coordinates which are recorded at a specific time interval.
So, we know that at all these different time points, this animal had visited all these
different locations.
So, that is one way of getting the location of the animal using GPS collars.
The second way is using a GPS plus satellite combination tracking.
So, these collars are GPS plus satellite combinations.
So, what they do is that they have a GPS receiver inside.
So, they know the latitude, longitude and elevation of that place, but they also have
transmitter that can transmit signals back to the satellites and these are different
satellites than the GPS satellite.
So, these are telecommunication satellites.
So, once this device has logged latitude, longitude and elevation locations or data
points for a specific time frame, it will then transmit this data to the satellites
and then from those satellites, we will get these data back at our control stations.
So, in this way, you do not have to go back to the animal to retrieve your data points,
but essentially what we are doing in this case is that we have an animal with the collar,
then there is a telecommunication satellite that is going somewhere on top of us and suppose
this is our control station.
So, this collar after getting GPS coordinates and the elevation will then transmit the signal
to the satellite which will then relay it back to the control station.
From this control station, we will directly get the latitude, longitude and elevation.
Now, the benefit of using a GPS collar with satellite combination tracking is twofold.
One you do not, we have no need to retrieve the collar to get data because this data is
continuously being received at the control station and two is that it is near real time
because this collar is continuously transmitting the lat, long and elevation data to our control
station. So, we can know within say 20 or 30 minutes where this animal has been.
The minus point or the drawback of using this GPS plus satellite combination collar is that
because of an extra transmitter which is the satellite transmitter and remember that this
transmitter needs to have such a large amount of power that it should be able to transmit
the signals right up to the satellite. So, essentially it has larger power consumption
which also means that the battery drains faster. To circumvent the problem of battery draining
faster because if a battery drains fastest then it means that you can deploy this satellite,
this collar for a very small period of time. So, to compensate for that you have a larger
size battery. So, to compensate you have a larger battery. Now, a larger battery in turn means more
weight. Now, more weight reduces our options of putting this satellite collar, this GPS plus
satellite collar onto the animals because typically for any animal the weight of the
collar that can be used with this animal is typically less than 3 percent of its body
weight. The maximum you can go is close to around 5 percent of the body weight because
if the collar is too heavy then it will restrict the movement of the animal and will restrict the
normal natural activities of the animals. So, we typically have to have a weight cutoff
of around 3 percent of the body weight. Now, if your collar is very big then you cannot
deploy it on smaller animals. So, this also becomes a drawback with these collars.
So, in this lecture we looked at radio telemetry, we looked at different kinds or different ways
in which we performed radio telemetry. We can do it using a VHF collar which is a very high
frequency collar. We can use it with a GPS collar in which these GPS data are logged into a data
logger and then we can retrieve it back. Third, we can go for a GPS plus satellite
combination tracking in which we can get a real time location of the animal, but with a drawback
of having more weight in the collar which reduces our options of deploying it. Then in the case of
VHF collar we saw that we can locate our animal using two ways, one is triangulation and second
is homing. In the case of triangulation we take multiple readings, multiple bearings at different
locations, then we draw lines to that location and where those lines intersect is where we have
our animal. In the case of homing we will we get the direction of the animal using our antenna,
then we move closer so that its signal intensity is greater. In that case we deploy our antenna
in an eye fashion or we only make use of the coaxial cable to get even finer location or
finer bearing of the animal and then we move closer and we actually get to the animal.
So, radio telemetry is these days a very important technique for monitoring of animals,
for monitoring individual animals as well as for monitoring of a pack of animals. So,
we get data about say in the case of tigers, if these tigers are wholly resident in our forest
or whether they are going outside, whether they are migrating, if they are migrating what migration
routes are they taking, if they are dispersing what dispersal routes they are taking, at what
times do these animals rest, at what times do these animals move, whether they are moving in
the day time, whether they are moving in the night time and data such as these. So,
this is a very important technique and that is all for today. Thank you for your attention.
