Lecture 07 : Adsorption and the Energetic of Adsorption

IIT Kanpur July 201
20 followers
Dec 2, 2023
Hello everyone, welcome to lecture number 7, in this lecture what we are going to look
at is the adsorption of atoms on clean surfaces, in the previous lecture you have already seen
how to create a clean surface, so believe me now onwards we are going to always work
inside an ultra high vacuum chamber, so that is something I have already told you, so that
means we are going to work always with a clean surface.
Now adsorption of atom is actually the most important thing for us because with the adsorption
of a single atom, with the adsorption of many, many atoms on to the surface we are going
to create basically the thin film and finally the so called interface, then we will also
look at the energetic of adsorption, how basically the energy of adsorption is controlled, what
are the important energies that we need to keep it in mind and then we will also look
at the adsorbate layers in general and mainly what we are going to do is the looking at
the nomenclature of the ad layers, so how do we basically call a name for this different
type of ad layers, yeah.
When I call ad layer it actually means an adsorbed layer that is what it means, now
this here is actually kind of a physical vapour deposited, we are going to see after couple
of lectures you will see what is a physical vapour deposition meaning, it is a simple
evaporation method of an atom inside an ultra high vacuum chamber, so what you are seeing
here is actually cobalt atoms, isolated cobalt atoms and this what you are seeing is actually
a trimer of cobalt atom, so that means 3 cobalt atoms are coming together like that and then
here you have a dimer that means 2 atoms together like that, so what you are seeing is a clean
silver 111 surface, so this is actually the silver 111 surface and I have deposited cobalt
atoms on to this, so you can basically now work with atoms alone, so that is the interesting
thing about that and with this scanning tunnelling micrograph I can actually image them nicely
and resolve at their atomic level.
Now, when it come to the adsorption of an atom on to surface, there are certain important
things that you have to keep it in mind, now remember that we are going to always discuss
or deal with atomically flat crystalline surface, so that means there is a particular symmetry
for the surface, there is a particular way the atoms on the surfaces are arranged, therefore
it is extremely important for us to define something called adsorption site of the atom
that is actually getting stick to the surface.
So here is an example, I have here an FCC 100 surface and the green ones are basically
the first layer, the surface and the light grey is the second layer and you have already
seen this FCC 100 surface that is actually a 4 fold symmetric surface, right. Now, when
the atom goes on to the surface, it has many different choices but where does the atom
really go and that is the question, of course it can go on to this part here which is actually
a 4 fold symmetric site or the atoms can go directly on top of an atom or it can also
go on top of a in between 2 atoms here, so these particular adsorption sites are namely
known as 2 fold bridge site or 4 fold hollow site and then you have something called on
top or atop site, yeah.
So the name itself suggests what it means, so this is actually a 4 fold hollow site because
you can see here there is no atom in the first layer, the atom is actually in the second
layer, therefore it is actually a hollow site and this for example is a very, very favoured
site for the adsorption, you would imagine why is that? Because when the atom basically
adsorbs this site, you see there is actually 4 and then 1 coordination to the atom at the
bottom, so there is actually about 5 coordination that this atom can have when it basically
adsorb on the 4 fold site but when it adsorb on the 2 fold site as you see here, in the
2 fold site, the atom is actually having a 2 coordination basically, so the coordination
number is less and when the atom is actually adsorbed on top of an atom, then you see this
only has a coordination just with the atom on the surface.
So that means the number of coordination is finally going to define where these atoms
are going to finally adsorb because that coordination will define how strong is the adsorption and
that is what we are going to see in the next slide and then that will decide where the
atoms are going but you will see that you will encounter all these sites will be occupied
or the adsorbate would use many different sites of the surface to get adsorbed, it is
not necessarily that you always hit this so called most stable or most energetically favourable
4 fold hollow surface, hollow site for example.
So let us have a look at first familiarise the possible sites in different surfaces,
so for example if you take the 1 1 0 surface, you know the symmetry of the surface is different,
this is actually a rectangular site, therefore your hollow site that means this site here
looks similar to the one on the 1 0 0 surface but now you see that they actually have a
weaker coordination along this direction, right, there is no atom there, there is only
a coordination along this side, so this is mostly going to have a coordination like this,
right.
And then you have something interesting, a site like this and also a bridge site like
this and then finally an atop site, so these sites are actually called like that, of course
this particular site is actually known as the 2 fold hollow site because this is not
the 4 fold symmetric surface, it is a 2 fold symmetric surface, therefore the hollow sites
are basically known as a 2 fold hollow sites and then you have here something called an
atop site that is the top of the surface atom, then you have 2 different type of bridges,
one is called as a short bridge because you can see the distance between these 2 atoms
are much shorter compared to the distance between these 2 atoms, so that means when
an atom goes here it is actually absorbing on a short bridge and when an atom goes here
it is actually absorbing on a long bridge, right.
Now you see the difference, the surface as the surface getting much more complex or getting
more rougher you are going to get basically like more possible adsorption site, yeah.
And now if you look at the 1 1 1 surface that is one of the surface we talked about is the
least corrugated surface, of course atop is always an option, yeah, atop site is always
an option but you now see that I have basically here 2 different type of hollow sites, yeah,
a hollow site where I have no neighbour in the second layer and another hollow site here
which is actually having a neighbour just below that and these 2 sites can actually
just occupy atoms and they are actually known as the HCP hollow site and the FCC hollow
site.
So this is something you might also have studied in previous classes or earlier solid state
related courses where hollow site is actually known as something like an AB, AB type packing
and FCC sites are actually having something called an ABC, ABC type of packing, yeah,
so that is the basically the point.
So these sites are not energic in terms of their adsorption depending on the material
they can be slight differences in the energy but they are very close in terms of the coordination
because both sites would offer basically 3 coordination to the atom that is adsorbing
on the surface, so that is the key point here.
Now once you have understood the adsorption site, so now what I want to basically just
discuss with you is the energetic of the adsorption, how or what are the important energies that
we need to consider or keep it in mind when you understand the adsorption of an atom onto
a surface.
Now to understand this we will do a small experiment where we take an atom namely X,
it is any atom no matter what atom you would take, any atom and you adsorb onto a surface.
Just keep it in mind that this surface is atomically flat but now I am not at this moment
looking at the specific sites to which the atom is actually adsorbing, I am only just
considering that the atom is actually approaching the surface.
And you see that the atom is basically approaching as it keep on approaching there will be a
point where the surface start to basically interact weakly with the surface and that
is where you would call that there is a weak interaction that is happening and that is
something you can call it actually a physisorption that means only a physical adsorption via
not but not strong interactions.
Then if you push the atom a little further down then you can see there is true chemical
bonds that can form which is actually typically known as a chemisorption.
Now when you look at the energetics that means how the energy of the adsorbing atom changes
as a function of the distance between the atom and the surface, so what I am plotting
here is actually something known as reaction coordinate or this coordinate is actually
right now just for the convenience we use a one dimensional coordinate of the atom moving
towards the surface nothing more it is just a one dimensional coordinate.
So that means along this direction atom is basically approaching the surface.
Now when the atom is approaching the surface you would naturally imagine that the interaction
start to gain and once the interaction is actually gaining which would means that the
total energy of the atom that is approaching is basically decreasing and as a matter of
fact you can see that the energy is basically going like this, the energy is going down
like this right.
Now the point is this is actually a physisorption in the beginning the interactions are weak
therefore the atom is going to get adsorbed physically onto the surface not chemically
yeah in that case you can see that this so called energy gain that the magnitude of energy
with respect to the original energy of the atom the potential energy ideally is actually
known as the energy gain due to physisorption.
So you can call it as actually as a delta E physat or you can even call it actually
as an E physat which means like the energy gain during the physisorption.
But now the interesting point as you told if you actually push the atom a little further
on to the surface so then actually it can do undergo chemical reaction that means the
interaction becomes stronger and stronger and if that is the case then the atom is basically
gaining a lot of energy by putting them and chemically reacting them to the surface.
It is not necessary that all atoms would chemisorb on surfaces it depends really on the nature
of the surface and the atom which is adsorbing.
For example if you try to adsorb helium on metallic surfaces or any surfaces then you
would find that mostly they are going to be physisorbed and not chemisorbed.
But if you put oxygen on to gold or copper or whatever surface you would find that most
of the time they actually get chemisorbed.
So it also depends a little bit but the overall picture is this that as you put the atom closer
to the surface it physisorbs weakly interacting that means there is an energy gain and then
finally it goes down.
So the total energy diagram would be from a starting point like this a small energy
gain and then further strong energy gain and then finally it goes like this in the
path.
And this energy the magnitude of this energy is actually the total gain in energy which
is something you call it as the adsorption energy but that is the same amount of energy
that you also require to remove the atom from the surface therefore you can also call it
as actually the energy for desorption.
So let us call this one as energy of adsorption and which is also equal to energy of desorption
yeah you would find this terminology is slightly different but you can always call it as the
energy of desorption and the energy of adsorption but the only difference is that their signs
are going to be changed right because once the system is actually adsorbed it is there
is a gain in energy and because the gain in energy is always indicated by a negative
sign so the adsorption energy is basically a negative quantity yeah and if you want to
remove the atom from the surface you have to put in that much amount of energy so therefore
normally the desorption energy is actually counted as a positive quantity good.
So that is basically the general energetics of an atom adsorbing on to the surface.
But now what is interesting that we can look at a special case which is actually a diatomic
molecule yeah a molecule that is connected so let us call it actually as a homoatomic
molecule heteroatomic molecule would also do similar but let us take actually a homoatomic
molecules and I have a molecule now and the molecule a diatomic molecule is now adsorbing
on to the surface so everything works the same way but the only interesting thing here
or the most interesting thing that you have to keep it in mind when the interaction of
the molecule start to increase then you can see the interaction between the molecules
are actually starting to weaken that means if this would have been the molecule while
it adsorbed it basically start to also just get separated and then finally when they chemisorb
on the surface these atoms are truly separated not necessarily completely away but they are
actually separated not as in the case of the true molecular situation.
So if you look at the energetics of that it looks slightly different the overall picture
is the same yeah the overall picture look the same as you have seen before but the difference
is now that when the looking at the chemisorption particularly the chemisorption is basically
leading to a different point in energy compared to the physisorption the reason is very simple
that this extra magnitude in energy is nothing but the dissociation energy of the molecule
itself because the molecule when it physisorbed without any dissociation it actually can just
go on the surface right.
So there is an energy gain when a molecule just goes on to the surface but if I have
to dissociate them I need to supply an extra amount of energy and that is the reason why
your chemisorption curve would reach to a higher point than the physisorption because
in the physisorption when you remove the molecule the molecule go as a single molecule but when
you remove from a chemical state that means a chemisorbed state you can see the atoms
are actually separated it goes like X and X but from the physisorbed state when the
molecule goes it is going as X2 that is the difference.
So because of that you will see that there is actually a difference in that.
Now the interesting aspect here is if you would take molecules that are having extremely
large dissociation energy then what is interesting is that because of this extremely large dissociation
energy of the molecule itself you would find that you create basically some kind of a barrier
between the physisorption and the chemisorption.
It is actually due to the fact that the crossing of the physisorption the crossing of the physisorption
and the chemisorption actually is going to happen at a higher point than the physisorbed
state.
Therefore you ideally create some kind of a barrier so that means you have a physisorbed
molecule and then the molecule need to overcome a barrier finally to reach to the so this
is actually the physisorbed state and this is the chemisorbed state and the molecule
need to basically cross this barrier in order to come to the chemisorbed state.
So that is the difference in this case compared to the general physisorption or generally
atom adsorbing on to the surface.
Now we understand this and now once we understand this we can actually also have a look at the
energetics of the adsorption of atom on to a lattice because that is something we have
not considered.
How does the lattice play the role in the adsorption energy?
For that we need to consider a lattice so let me just draw a lattice so this is actually
the top surface atom of the surface and of course the crystal continues in this way and
of course the crystal also continues in this way.
Now the point what I want to make here is actually now when the atom approaching on
to the surface as I have already seen as we have already discussed in the previous slide
that the atom could actually just approach along this particular point or atom can actually
just approach along this particular point.
In that case the atom is going to come in this case to an atop situation and here it
is actually going to come to a bridge or to a hollow site.
So depending on where it goes of course in the side view we cannot distinguish the bridge
and the hollow but the atoms now can basically just come to do different sites.
Now you see the point as I have already mentioned in the previous slide depending on the coordination
number that the atom gain on the surface the adsorption energy truly be higher than the
other situation that means if you would consider that this is the point where it basically
has the highest coordination then the adsorption curve of this site would look somewhat like
this.
I am not considering the physisorption in site so this would be the energetic so basically
I have my energy here and here is basically the distance of the approach and the magnitude
is actually defined by how deep the atom goes.
But now on the top site the interesting thing is the same curve if I would draw on the top
site it would basically just look like that.
So what is the difference in this?
The difference is basically in the magnitude of the E adsorption energy in the two different
cases.
So you can see that the energy E adsorption energy is actually much higher compared to
that at the top site.
So now if you would have plotted basically the energetics of the adsorption of atom along
the lattice you would find that the adsorption energy is low at this point let me just take
a slightly different color to highlight this.
If this site I have a very low adsorption energy and then when I come here I have actually
a high adsorption energy.
So that means the profile of the adsorption energy would basically look like this as periodic
as the surface and this is basically the typical magnitude of the energy difference between
the adsorption energy of a top site, a hollow site or a bit site and so on.
So that means the surface itself is a kind of landscape of energy for the atoms to adsorb
and the atoms at a lower coverage you will hear what a coverage means at lower coverage
means lower concentration of the atoms on the surface the atoms would always go on to
a hollow site or to a bridge site than on a top site because the energy at that point
is actually higher.
So far we have seen the different possible adsorption sites on surfaces and also have
seen the energetics.
Now let me introduce to you the typical nomenclature or the naming convention of ad layers on surfaces.
So here I have an FCC 100 surface decorated with ad atoms.
So here the black circle are surface atoms and the blue is basically the ad layer atoms.
Now what you notice is actually that the unit cell of the surface is basically a square
unit cell as you have already seen for the FCC 100 surface and if interesting thing in
this particular type of ad layer that we are showing where each of the surface atom is
actually decorated with a ad layer atom.
So that means it is a 1 to 1 adsorption basically which is meaning that the lattice parameter
of the surface and that of the ad layer is basically matching.
So this you can call it as a 1 by 1 ad layer.
So the 1 is basically the 1 by 1 is basically representing that along both crystallographic
direction you would find the ad atoms at the unit of 1.
Basically meaning that every atom is basically decorated by an ad layer atom.
Now if you would take a little bit more complex surfaces here again you have the blue as the
surf ad layer atom ad layer and this is basically the surface in all the cases that I am going
to discuss it will be the same.
Now I can basically represent the ad layer using two different type of cells.
So either the blue cell which is a little larger one or with the magenta one.
So in this case what you notice is that it is actually a cell which is having two atoms
in the cells.
So it is not a primitive unit cell because here you can see this is a primitive unit
cell where you have basically one atom in the cell.
So this is not a primitive unit cell that is the difference.
But you can basically represent the surface using either of this and you can generate
the surface ad layer using any of this unit cell.
Now how do we basically name these unit cells?
Well I can basically calculate the unit lattice vectors of the surface with respect to the
surface unit lattice vector which is a and this is basically root 2a in both direction
because it is a square lattice and in this case it is basically 2a.
So if I would basically write down the unit cell corresponding to this blue one then I
have basically a 2 by 2 unit cell which is meaning that along both the direction I would
basically require about two times to move to find actually an add atom and I also need
to basically represent that this is basically a center type of cell.
So there you have already seen that in the two dimensional bra phase lattice and therefore
I would also call it basically a C 2 by 2.
So you have to first name the surface which is FCC 100 C 2 by 2 would be the name of the
surface the add layer.
Now the other unit cell is basically represented like this so you have the root 2 by root 2
that is a unit cell and it is an FCC 100 surface and in addition to that you also need to basically
mention the angle that the add layer is actually making with respect to the surface unit lattice
vectors and that is for 45 degree in this case and therefore you have to also represent
the r.
This kind of a notation of representing the add layer is known as Woods notation which
is a simple notation.
Now let me just introduce to you another surface for exercise here we have a 1 1 1 surface
and the surface unit lattice is basically represented using this oblique here.
Now again the surface we can basically represent using any of these cells where the magenta
one is basically a unit cell containing one atom and this is therefore a primitive cell
and this is basically again a centered unit cell basically.
So you can basically just mark the unit cell as it is and depending on the magnitude of
the unit lattice vector you can actually now name them either a C 3 by 3 or a root
3 by root 3 but it is actually an r 30 degree so this is rotated with respect to the surface
unit lattice vectors.
Now let us take one more example so this is an FCC 110 surface again the blue basically
representing the add layer and the black lines are basically representing the surface.
Now the first representation which is basically this unit cell so which is actually a 2 by
2 unit cell and that is actually written as FCC 110 2 by 2 add layer.
Now you can also represent the surface using this magenta unit cell where the lattice vectors
are root 3 by 2 and root 3 by 2 with respect to a because that is also something different
for the FCC 110 surface that it is basically the unit cell lattice vectors along different
directions are different in magnitude.
So with respect to a so the unit lattice vector magnitude for this unit cell is basically
root 3 by 2.
So you can now represent the unit cell of this add layer using two different ways either
you call it basically a root 3 by 2 by root 3 by 2 with respect to a and in that case
the angle of rotation is basically 55 degree or you can basically represent the same unit
cell as root 3 by 2 root 3 by 2 with respect to b therefore the angle is basically r 35
degree.
So that is the only difference but the interesting thing about this Woods notation is that depending
on how you represent you can have slightly different name for the different type of unit
cells.
Now in general this is how you write the Woods notation you need to have the surface then
you need to basically have the magnitude of unit lattice vectors for the surface and the
add layer and then the rotation and then finally the adsorbate atom.
So imagine that what you are looking at is a silver surface and the add atoms are nothing
but cobalt.
So in that case we would be writing the surface as AG 1 1 0 centred or primitive so now if
I would basically take this one then I will have to use a centred 2 by 2 and then the
angle so there is no angle because this is basically the same as that of the surface
so there is no angle and then finally the adsorbate atom cobalt.
So this is how you are going to write the Woods notation of the surface.
So you can basically do this exercise for different surfaces and you can learn this
further.
With this I would like to conclude this lecture and in the next lecture I will introduce you
one more type of notation for the surface which is a little bit more generic in nature
and that is actually called as a metric notation.
Thank you very much.
