Lecture: 26

IIT Kanpur July 201
20 followers
1 Video View·Dec 1, 2023
So, in the last class we were discussing about the ah series RLC circuit and its response
when the source is not available. So, we will continue our journey from there in this week
also and let us see ah when you apply step input then what will happen.
So, let us first understand what we discussed in the last class. We discussed about the
source free series RLC circuit and when we were discussing we mentioned that the ah characteristic
equation which we have ah we get from Kirchhoff voltage law is of second order in nature that
is why it is called a second order circuit. Now, if you see this figure the energy is
initially stored in inductor as well as capacitor. So, capacitor is initially charged with voltage
V naught and inductor is having some initial current as I naught. So, since these are these
two elements are storing the energy that is why the circuit is having some current flowing.
Now, we stabilize that the equation using KVL we will get is second order equation that
is d 2 I by dt 2 plus R by L into d I by dt plus I by LC equal to 0. Now, we assumed
that the current is A into e to the power sigma t. Now, if you put the value in ah the
above equation and we solve it we found that there are two roots possible for the equation
and we saw that sigma 1 and sigma 2 and we ah assumed that let us say alpha is R by 2
L and omega naught is equal to 1 by under root LC and when we simplified we got sigma
1 and sigma 2 as minus alpha plus under root alpha square minus omega naught square and
sigma 2 is nothing, but minus alpha minus under root of alpha square minus omega naught
square. Now, based on the values of sigma 1 and sigma
2 we found that there are three types of solutions available for the ah the equation that is
first case when alpha is greater than omega naught it means that the ah circuit has over
damped case, when alpha is equal to omega naught we have critically damped case, when
alpha less than omega naught we have under damped case.
Now, when we say that it is over damped and alpha is greater than omega naught the condition
which we got was C greater than 4 L by R square. Now, based on that condition the current value
what we found was A 1 into e to the power sigma 1 t plus A 2 into e to the power sigma
2 t. Now, if you plot the curve that is the variation of current I with respect to time
we saw that the ah curve will look like this which will start from 0 and eventually it
will come back to 0 at as time t tends to infinity. Now, second case what we discussed
was alpha is equal to omega naught where the condition is that C is equal to 4 L by R square
and we found that current at time t is A 1 t plus A 2 into e to the power minus alpha t.
And when we plot this the value of current I with respect to time t we saw that the
characteristic of ah the current is as shown in the figure and we saw that at time t is
equal to 1 by alpha the current will be at its maximum value.
Now, the third case what we discussed was alpha less than omega naught in that case
C was less than 4 L by R square and we saw the current equation which we got was having
exponential term as well as sin and cosine terms. So, when we plot the variation of current
I with respect to time we saw that it was exponentially decaying as well as it was oscillatory
that is because of the sinusoidal components available and the time period was 2 pi by
omega d and it was exponentially decaying because of the exponential component available.
So, this is what we discussed in the last class. Now, let us see what are the various
properties of series RLC network. Now, we ah we can say that damping effect is due to
the presence of resistance R because the ah damping factor alpha depends upon resistance
R. So, we can tune the value of R on and get the various ah kind of damping effects. When
the condition is alpha is equal to 0 means R is equal to 0 it means that we have a pure
LC circuit and in that case we will have only omega naught that is 1 by root LC because
alpha is 0. So, then this is nothing, but your undamped natural frequency. So, what
will happen in that case that response is only oscillatory and then circuit is said
to be lossless and because of no dissipating component the ah energy will be keep on oscillating.
Now, by adjusting the value of R the response may be made undamped overdamped or critically
damped or may be under damped. So, the R is the important component in the series RLC
circuit. Oscillatory response is possible due to the presence of two types of storage
element. So, here we have inductor as well as capacitor which act as a storage elements.
So, having both L and C allow the flow of energy back and forth because of that we get
the oscillatory response. Now, the damped oscillation shown by the
under damped response of the circuit is also known as ringing. Now, the critically damped
case is the borderline between under damped and over damped cases and decays the fastest.
So, if you have a system which is critically damped it means that it will decay the fastest
with the same initial conditions the over damped case has the longest settling time
because it takes the longest time to dissipate the initially stored energy in the storage
elements. Now, if you want the fastest response without
oscillation or ringing what we need to do we have to make the system critically damped
So, in that case we will get the fastest response without any oscillations. Now, let us talk
about the source free parallel RLC circuit. So, what will happen in this case you will
have R, L and C all these components in parallel. So, what you need to do you have to first
figure out what is the initial condition. So, let us assume that initial current flowing
through the inductor is I naught and initial capacitor voltage is V naught. So, what you
can write I at time t is equal to 0 is nothing, but I naught and you can represent it like
ah the integration of V at time t into dt where integration ranges between minus infinity
to 0 because this is the time where the system is at rest initially.
So, what is the current flowing at time t is equal to 0 will continue to flow ah in
the circuit at time ah before t ah equal to 0. Similarly, for time t is equal to 0
we are assuming that capacitor is initially charged with voltage V naught. Now, what will
happen if you assume these two initial conditions and ah the circuit is in parallel then the
best thing is that you can apply Kirchhoff current law at the node where all the three
elements are connected. So, now, what will happen? You will say that some of the resistor
inductor and capacitor currents will be 0 at this node. So, you can ah write the current
which is flowing through resistor is V by R let us assume that the ah voltage at this
node is V. So, the current which is flowing through resistor with the V by R similarly
current flowing through inductor would be 1 by L 0 to t V t dt and the current flowing
through the capacitor will be C dV by dt. So, the summation of all those three elements
would be 0 at that node. Now, what you need to do? The equation we have just got because
of the application of KCL let us differentiate the equation once again. So, what we will
get? We will get d 2 V by dt 2 plus 1 by R C dV by dt. So, basically the ah value of
the component C you can take them in denominator. So, it will become ah dV by dt into 1 by R
C plus 1 by L C into V equal to 0. Now, we can obtain the characteristic equation
by replacing the first derivative by sigma and the second derivative by sigma square.
So, if you put the value of sigma and sigma square in this equation what you will get?
You will get sigma square plus 1 by R C into sigma plus 1 by L C equal to 0. So, since
it is a second order equation you will get two roots of this particular characteristic
equation. What would be the roots? The roots would be sigma 1 and sigma 2. Let us assume
the values are the characteristic equations roots are sigma 1 and sigma 2. The value of
sigma 1 and sigma 2 can be given as minus 1 by 2 R C plus minus under root of ah 1 upon
2 R C square minus 1 upon L C. So, if you see this equation ah for sigma 1 you can place
ah the plus sign and for sigma 2 you will use negative sign. So, you will get simply
roots. Now, let us assume that the 1 upon 2 R C
is nothing, but alpha and 1 by L C is nothing, but omega naught square. So, if you put these
values the sigma 1 2 which are the roots of the characteristic equations can be represented
as minus alpha plus minus root of alpha square minus omega naught square. Now, if you see
this these roots these are similar to what we got when we were analyzing the series R
L C circuit. So, what will happen that you have assumed
alpha and omega naught and based on that you can again have the three possible solutions.
So, if you compare similar to your series R L C circuit in this case also you will get
three possible solutions the conditions for these possible solutions would be one condition
is alpha greater than omega naught, second is alpha equal to omega naught and third is
alpha less than omega naught. Now, when alpha alpha is greater than omega
naught you call it as over damped case. So, what will happen if you put the condition
if you replace alpha and omega naught values with this ah with these value which you assumed
previously you will get the condition that when L is greater than 4 R square C the circuit
will be over damped. Now, in that case the roots of the characteristic equations are
real and negative this is similar to what we got in case of series R L C circuit also.
So, similarly the response which you will get in this case will again be A 1 e to the
power sigma 1 t plus A 2 e to the power sigma 2 t. So, this response would be similar to
what we got in case of series R L C circuit. Now, in case of critically damped case where
alpha equal to omega naught your condition will be the system will be critically damped
when L equal to 4 R square C. So, in that case also the roots are real and
equal. So, you can say the response would be V t is equal to A 1 plus A 2 t e to the
power minus alpha t. So, this is again similar to what we got in case of series R L C circuit.
Now, the third case is under damped case when alpha is less than omega naught that
means, the value of L is less than 4 R square C. So, in this case the roots would be complex
and can be expressed as sigma 1 2 is nothing, but minus alpha plus minus j omega d where
omega d is root of omega naught square minus alpha square. So, you can compare both of
the cases like series R L C and parallel R L C circuits you will come to know that the
roots are same the only change would be the condition because here the elements are in
parallel. So, that is why the case wise condition where
L is related to R and C would be different in both of the cases, but finally, the response
would be similar to what we got in case of series R L C circuit. So, in this case also
V t would be equal to e to the power minus alpha t which will give you the ah the exponentially
decaying response plus A 1 cos omega d t plus A 2 sin omega d t. So, if you if you plot
voltage V with respect to time t you will get the oscillatory response and it would
be decaying. So, in both of the cases like in case of series
R L C circuit we were comparing the current I with respect to time in this case since
it is a parallel R L C circuit we are interested in finding out the voltage with respect to
time. So, here you will again get the oscillatory response with exponentially decaying. So,
exponentially decaying because of this term oscillatory response would be because of this
term. Now, let us talk about the case when we apply
an S ah step input to a series R L C circuit. So, earlier when we discussed we were we discussed
the source free response of series R L C circuit. Now, what we are doing here we are connecting
the source with one switch which is closed at time t is equal to 0. So, when you connect
the switch there would be a current flowing in the mesh let us say this is I. Now, what
you need to do you have to write the ah the mesh equation for this circuit what we can
assume we can assume initially the voltage across capacitor let us say it is V naught
and current which is flowing through inductor may can can be considered as I naught.
So, these two would be the initial conditions which we know and based on that we will try
to simplify the the loop or mesh equation which we get from the KVL. So, when you apply
KVL at time t greater than 0 the moment when you close the switch you will get L d I by
d t plus R I plus V which is voltage across capacitor equal to external voltage source
V S. Now, you know that I is nothing, but C d
V by d t. So, you can put the value. So, what you will get you will get ah the equation
in second order. So, what you will get you will get d 2 V by d t 2 plus R by L you can
take L in the denominator plus V divided by L C equal to V S by L C. So, this is what
you get when you put the value in the equation. Now, when you compile the characteristic equation
the characteristic equation will not be affected by the presence of DC source.
So, what you can do the you can see the solution of this equation can be divided into two parts
means it will have two components one is natural response and other is forced response.
So, this will be similar to what we discuss in case of series R L or series R C circuits
in case when we apply the step input to those circuits. So, similarly here also we can divide
the total response of the circuit in two parts one is natural response and other is
forced response. Now, you can see that the total response will be ah can be written as
the forced response that is V F t plus natural response that is V N t.
Now, to find the natural response what you need to do you have to set the value V S equal
to 0. So, when you put the V S value V S equal to 0 in the in this equation. So, you
will get only the left side component and this would be equal to 0 and this is same
equation which we get when we ah analyze the series R L C circuit without any external
source. So, based on the previous discussion in case of source free series R L C circuit
we can write simply the natural response of the circuit and we can also say that there
are three conditions which are under damped under over damped and critically damped cases.
In case of over damped what we can write V t is nothing, but A 1 e to the power sigma
1 t plus A 2 e to the power sigma 2 t. Similarly, in case of critically damped you can write
V t is nothing, but A 1 plus A 2 t into e to the power minus alpha t and in case of
under damped case the value of voltage at time t would be e to the power minus alpha
t into A 1 cos omega d t plus A 2 sin omega d t.
So, these three equations are same equations which we got when we were analyzing the series
R L C circuit without any external source applied. Now, to find the force response you
need to find out what would be the steady state or final value of voltage. So, that
is V t means the time which tends to infinity the final value of capacitor voltage will
be the same voltage that is the source voltage. If you see the figure when you keep on this
particular switch on for very long period what will happen in that case your inductor
will act as a short circuit. So, the total voltage would be applied across
the capacitor will be equal to the source voltage because after the capacitor is charged
to its full value your current I will also be 0. So, you will get finally, the capacitor
voltage equal to V s. So, the same value we will use and we will say that the forced response
is nothing, but the source voltage. So, this we have got. So, what we can write now the
complete solution for the over damped under damped and critically damped cases can be
written as V t. So, in case of over damped you will say that it is V s plus A 1 e to
the power sigma 1 t plus A 2 e to the power sigma 2 t. In case of critically damped you
have to just write V s plus A 1 plus A 2 t into e to the power minus alpha t for under
damped case you will write V s plus e to the power minus alpha t into A 1 cos omega
d t plus A 2 sin omega d t. So, this would be in case of under damped
case. Now, what is left is the value of parameters A 1 and A 2. So, these values we can calculate
with the help of initial conditions which we assume that at time t is equal to 0 we
have voltage V naught and current which is flowing through inductor is I naught. So,
we can use that value and find out the value of those constants which are unknown in these
3 equations. So, with this we can close our ah today's
session where we discussed about the step response of a series RLC circuit. So, we will
continue our discussion in the next class where we will discuss about the step response
in case of parallel RLC circuit.
Thank you.
