13 Video Views·Nov 11, 2023 #grapevine #grapepruning #grape You’ve just found a grape variety you’d like to have some of in your yard, but it’s late in the year and winter’s approaching. Can you still start grapes? Yep! We’ll show you how.
#grapevine #grapepruning #grape #grapeharvest #plantpropagation
Grapes are an excellent addition to the yardscape or hobby farm. They are easy to propagate, using cuttings from the donor plant you want to create clones/offspring of.
Depending on the time of the year and the density of the plant material you harvest, there are different names for the cuttings and approaches to grow on new plants from those cuttings.
Cuttings taken early in the season are usually softwood cuttings, but we don’t usually do that for grapes. Cuttings taken mid-season are called semi-hard cuttings, and late-season cuttings are called hardwood cuttings.
If it’s late fall or very early winter, you will be working with grape hardwood cuttings. Harvest these from long canes that will not be needed for the following year’s growth on the donor plant. Use only wood from that year, and don’t do cuttings any smaller than the diameter of a typical pencil. You will want to retain 4 buds for each cutting.
Cut a blunt/perpendicular cut just below the bottom bud (the one that was closest to the main vine trunk), but not in the bud. Don’t leave a stub, as this will invite rot. Then count a total of 4 buds and cut about 1” / 2 cm above the 4th bud, in a slant. That pointed stub serves as a handle, a protector for the bud, and an indicator of which way the cutting will be planted. Handy, huh? This is especially important when you have a pile of mixed cuttings and you need to be sure to get the “polarity” right during planting. If you don’t the planting will fail.
Once you have your batch of hardwood cuttings, dip them in either rooting powder or liquid - a common and well-liked brand is Hormex®.
Then “stick” the cuttings into the growing medium directly in a propagation area in your garden or yardscape. Try to get at least 2 buds into the ground. Put a layer of mulch around them, and leave them out over the winter. Yep - through the winter. This will suppress the stem’s “urge” to put out leaves, thereby depleting the reserves in the stem that need to be retained to create root material.
Come spring, the soil will warm, sunlight will stimulate the cuttings to come out of dormancy, and root tissue will form in advance of the leaves - the way it needs to be.
Let them grow in place for several months, and then they can be potted or planted. Be sure to label them accurately. Different varieties are almost impossible to tell apart!
After the batch you see in this episode overwinters and then activates in the Spring, we’ll post a photo of the results here:
UPDATE PHOTO COMING SPRING 2024
In the meantime, we wanted to get this info to you so you could make use of it THIS year as the growing season comes to an end in much of the United States.
If you’d like to see how to prune your grape vines for maximum productivity and health, check out this episode:
https://youtu.be/0m5KWAXYH9Y
hey dirt farmer J here from dirtfarmer
j.com it's late in the fall almost
winter and you found some great
varieties you really like from your
gardening club or from a friend or
neighbor can you start cuting now yeah
you can let me show you
[Music]
how hey dir farmer J here from
dirtfarmer j.com one of the cool things
about having a yardscape and learning
about botney and plants and all of those
kinds of things horiculture is learning
how to do cuting now these kind of
cuting from grape Vines right here that
are done late in the season it is late
fall almost winter are known as hardwood
cuting if they were taken out mid season
then they'd probably be semi hard
cuttings uh but these are hard cuttings
and you think well how are you going to
start them now well what we're going to
do is let them over Winter with a little
bit of root hormone stuck in medium out
out in the field yep they'll be just
fine after they've overwintered and then
they start to Leaf out and the root
structures form on the bottom there
we'll actually post another picture uh
through our Instagram account and I'll
show you that in a link right above me
that you can jump over to uh in the
spring of 2024 or uh you can go to the
description below and find that link and
see for yourself the results now what
we're doing at this point is we're
actually letting uh the top weather
through and that suppresses Leaf
formation preserves energy in the stem
parts and then allows the root formation
to form first which is key to successful
great propagation but is this just a
bundle of sticks is there a little bit
of methodology to it yeah let me take
you into the vineyard briefly show you
what it starts with and then we how we
cut these prepare them and then stick
them in the ground hey hey come on let's
go all right grapes are very vigorous
and they put out a lot of growth in one
single season and this particular
variety Canada really puts out long
stems it's very prolific a lot of over
shading but it gives you a lot of uh of
stock to work with and I'm going to take
one of the canes here and just uh we'll
cut a piece of it and show you how it's
prepared so couple things I'm going to
teach you just a little bit about plant
structure very quickly if you notice
there is a node right here there's a
node here a node here a node here and
that's where there's active plant growth
that occurs either leaves or depending
on what you do with hormone or burying
it or that sort of thing you can create
root structure out of this so the nodes
are quite a distance apart and this stem
smooth part right here is called the
inter node and so there's quite a
distance here between them now to make
cuting what you want to do is remember a
couple things one let's call it polarity
polarity matters in other words uh the
part that's closest to uh the main Vine
trunk uh is the downside that's what's
always going to go to the root and the
furthest part away that's going out
towards the thin part or out to the
outer part of the branches that's the up
part and what you want to do uh you're
going to end up with quite long cuting
because you need to have at least three
nodes I like to go four now what you're
going to do is cut right below the node
don't cut on the Node and don't leave a
long stem because if you do that'll rot
and that'll causes problems so you can
cut this a little
closer let's say about like that and
then count up three more nodes and now
what you're going to do here is cut a
handle and an indicator of what is up
and so what you're going to do is cut
like that at an angle and we'll go ahead
and cut that off and when you do I now
have a cutting as you can see it's
pretty long here but the other thing is
I drop it and I've got a bundle of them
on the ground and I need to pick them
all back up I can really quickly Orient
what goes up because the pointer on the
top with the length there and then this
is cut blunt and then when I get a
bundle of all of these cuttings these
hardwood cuting I can just bundle them
together all right so that's how you're
going to come up with all these cuting
and of course if you want to know how to
prune so you're not cutting off next
year's important growth the on you
really count on check out the link right
above that we show you how to prune
grapes uh and how we do that and just
the the methodology the pattern you're
working it'll really de demystify that
but this is the end result you want as
many of these starts that you want for
the following year all right let's show
you what happens next we now have our
cuting here and uh these are mixed
somewhat some are pointing up and down
as you can see they fell on the ground
so again using our uh indicators the
blunt cut on the bottom end the root end
and the points up on the top here uh to
go up I can very quickly Orient all of
these now some of these are different
lengths because depending on how old I
always use last year's wood by the way
um as you can see this has just got a
slight bark covering there somewhere the
bark has actually come off off there uh
but this this wood is vital and as you
can see in the
ends it is very green and still so I'm
going to go ahead and Orient all of them
up there was one that was reversed and
you might be thinking why such different
lengths well depending on where it was
on the vine like this one a lot of
distance the inner nodes are quite long
here whereas some of the others that are
shorter you can see that the inner nodes
were pretty tight right here but again
I'm trying to get four nodes and I'm
actually trying a couple of three cuz
I'm always just experimenting but once
you get these all oriented now you're
going to take your next step so let's do
that real
quick looks like I'm set all right now
what you need next is one of two things
either you need a growing tray of some
kind it can be something like a plastic
shoe box or even a homemade crate uh
that you can put groin medium in that
can be pear light potting mix um compost
with perlite anything that'll hold
moisture and can be compact a little bit
around the base of uh The Cutting when
you put it in that'll work just fine in
my case I'm actually going to put it in
a groin bed outside and we're just going
to let it over winter but to prepare it
uh I like to use a um rooting compound
this is hormex some people say it
doesn't seem to make much difference
uh I like using it and I'm kind of lazy
I don't even dilute it I just go ahead
and dip each end on the blunt end to get
this bud at the end right here coated
with a hormone and then we'll take it
out and stick it in the garden all right
let's do
[Music]
it I like to put this inside of here in
case there's a tip over I don't end up
with a
[Music]
problem
[Music]
okay we've got those all coated they're
ready to go let's take them out
into um my propagation bed there we'll
put them in stick them in there and
let's see how that's done okay now here
we are at the propagation bed so you can
see a little bit over here some other
previous starts and this is I'm just
going to clear back some of the grass
out of this area this is actually over
in this area here is some asparagus for
next year but I'm using this as a
temporary propagation bed so here we go
we're going to plant each of these down
and what I do to just make it easier is
use a reg just common Nail Barn Spike
you can get a bigger one if you want
this is what I had on hand but I'm just
going to po poke down deep and do a
pattern I like to do them about 4 in
apart some people like them
closer when you do the 4 in just take
your downs and press down as far down as
you can and try to get that second butt
in if you can that one
[Music]
[Applause]
[Music]
did
[Music]
okay there you have it now what we'll do
is over winter these I'll just mulch
them back in uh and what'll happen is
over the winter and early spring uh root
formation will occur and then budding at
the top and eventually it leaves and
we'll get a start that we can go from
there remember if you want to see the
results in next spring uh just look at
the description find the link to our
Instagram photo as soon as we get these
going we'll show those to you and what
this will do is really provide some nice
uh uh Plant Exchange material at the
upcoming uh spring Plant Exchange in our
gardening group another area that people
struggle with in their Garden is an
effective irrigation system we've come
up with a DIY PVC pipe system that is
reliable uses common things around the
Home and Garden uh hose and that you can
control with a timer if you like and
dependably put water right where you
need it suppress weeds uh reduce the
amount of water but get great results
you can check that out right here and
take a look at that while you're at it
take a look at this other video that
YouTube thinks is perfect for your
interest and we'd enjoy it if you watch
it too until the next time this is dirt
farmer J from dirt farmer
j.com