Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
If you're not using Cricut's Print Then Cut feature, guess what?
You're leaving so much money on the table when it comes to your Cricut machine.
In today's video, I'm going to teach you all of the Cricut money-saving hacks I have for
Print Then Cut.
These are going to save you time and time again to get the most out of your material,
the most out of your machine, and of course, the printer.
I cannot wait to share with you these hacks, so if you are brand new here, hit subscribe.
We upload new Cricut videos almost every single day, and be sure to leave me a comment letting
me know your favorite hack down below.
The first hack I want to share with you guys is actually before you even get to the process
of printing and cutting, and that goes back to setting it up properly to fill an entire
sheet.
I want to share with you exactly how I do this to help you really understand the process
because you only have one sheet at a time, so if you're printing one sticker at a time,
you'll find that you're wasting a lot more material, so you'll always want to make sure
that you try and fill an entire sheet.
From a lot of you that write in to the channel, you say, Tanner, how exactly do you fill an
entire sheet?
Let me share with you that right now.
You're going to see right here, we have quite a few stickers on the Cricut canvas.
One thing that we teach here at Maker's Going to Learn is that when you are putting your
images onto the canvas, guess what?
They do not show up the same way that you would when you are going to the Make It section,
so I have two different tips that I'm going to share with you that will help you in this
process.
Number one, the first thing you can do is just set up your stickers like I have right
here and just kind of guess.
So I have these stickers right here, and then I can press the Make It button, and then look
right here.
It's going to automatically populate in the Make It section, and what you're going to
see here is that, first of all, it thinks we're using a large mat.
We are not.
We're going to go back to the letter size, so 8.5 by 11 for our material, and then we're
going to let it auto-formulate over here.
Now, as you can see, when it automatically populates, for the most part, we have some
really, you know, it did really well, but what I want you to see here is that there's
room for us to kind of manually move some of these around, and we could actually make
this fit a lot more than we think, and the way that you can manually do this is I'll
just zoom in, I click on an image of my choice, and I just move it around.
Like it's literally this easy to create space for us to set up our sheet.
Like look at this.
Super easy, right?
Well guess what?
Now we see that there's something on mat2, so what we can do is we can click on mat2,
we can select mat2's image, and it'll automatically select it, we'll click the three buttons
in the top right-hand corner, and now we're going to select move object.
When you select move object, it's going to allow you to move that object from its own
mat to mat1, so just click on mat1 and press confirm.
Now you can see it is right back here, and look.
Now we're able to squeeze it in here.
Now here is why I don't love this feature, and I have another hack for you that I'm going
to share with you next.
Let's say that we, you know, have already went through all of this work of setting up
these images, making space, and we have a significant amount of space.
Here's the thing.
What happens when we are like, okay, I have more space, I'm going to add some more stickers.
When I leave this make it area, guess what?
Everything's going to revert back, and I'm going to have to start over.
So to save us from having to do multiple steps and continually be moving things around, I
want to share with you the easiest hack, which is something you can do on your canvas.
So let me share with you that right now.
All we're going to do is press cancel and go back to the canvas, and let me share with
you this hack.
All right, so once you're back to your canvas, what I want you to do is I want you to add
a brand new shape.
Go over, select add shape.
You can select this to be like a light gray color.
That's what I prefer.
You can do white, whatever you want.
And now you're going to create this size of rectangle or square.
You're going to take a rectangle or square and size it to this size, 7.44 by 9.94.
All right, now that we have that inside of our canvas, we are now going to fill this
shape up so that we do not waste any material from a regular sheet of sticker paper.
Now, this is to be really specific for anyone that's working with just a regular 8.5 by
11 sheet of sticker paper.
So you can do larger print than cuts.
But in today's training, we're focusing on the 8.5 by 11 sticker paper and hacks around
that.
So once you've done this, you can see we can start adding in our stickers.
Now I'm going to move my gray rectangle to the back.
And now I can just start filling my stickers in right here.
And I'll be able to like make some smaller ones.
I'll be able to like fill things in better.
And you're going to see how this is going to save us a lot of time by setting it up
here before even making it to the make it section.
So look at this.
What I love is once you add in the stickers that you are considering doing, here's what
I love.
You can go through and size some up.
You can size them down.
You can just try to fill the entire sheet, which I really, really appreciate.
So then you can say, okay, which sticker would I want more of?
Because it's really important that we don't waste the space we have right here.
Right?
So you have a few options.
You can duplicate from your existing stickers, or you could go to makersgonnalearn.com where
we have thousands of print than cuts.
You can pick a new one and add it onto the same sheet.
So what I can do here is go to my uploads area.
And what I love about makersgonnalearn is that once you have made an image and you've
uploaded it to your Cricut design space, guess what?
You don't have to go back to makersgonnalearn.com and redownload it the next time you want it.
You will already have it linked to your Cricut account.
So when you scroll through your uploaded images, you can just scroll through, scroll through.
You can see we're working on a lot of Christmas.
I can search sticker and I can be like, oh my gosh, like, of course I want to do coffee
as my craft fuel.
So I'm going to add that to canvas.
I'm going to add another sticker to canvas.
And all of these are found at makersgonnalearn.com.
So I've added these two stickers and you can see this one imported really large.
I'm just going to scale it down to four inches.
So now that we're scaling these down, you can just kind of take them and place them
where you would like it on the canvas.
So do you see that I can just turn this like vertical, scale it down a little bit more,
turn it vertical.
I'm going to rotate this 90 degrees and there you have it.
So we've been able to fill in our entire sheet and now we have a full sheet of stickers.
The last step before we move forward is you want to first make sure all of your stickers
are set to print then cut.
You can do that in your layers panel.
So you just make sure it all says print then cut.
And now you'll go down to your square or rectangle.
You're going to delete the rectangle because you're not actually printing and cutting it.
So we're going to delete that out.
And the last but not least step is it's very, very important for us to select all of these
stickers and do what action?
Attach.
We must, must, must attach right here on the canvas before we move to the make it section.
It's very important that when you have something set up in Cricut design space on the canvas
to actually have it move forward with you to the matte area and the make it area, you
must first attach.
All right.
So let's go ahead and select all of these here.
And all we're going to do is click attach.
Now that this is attached right here, what we can do is press make it.
So now that you're at the make it area, you can see how well this went ahead and automatically
set it up.
If for some reason your sizing is a little bit off, what I love is that you can go back
to the canvas, scale it down just a little bit.
And then when you go to make it under material setting, you will be able to make sure you
select the letter size and you can see on ours right here, letter size is selected.
Now you'll be able to cut that out really easily.
Now that you know the best way to set up your images, let me tell you my best kept
secret for making sure I save the most money when I'm stocking up on my printable material.
First of all, I absolutely love this brand right here.
It is Zacoto and we pick this up on Amazon.
There's so many different finishes between matte to glossy.
We absolutely love the feel of these stickers.
They literally feel like you purchased them from a professional print shop, but really
you did it at home, which I love having that feel with all my stickers.
But my number one secret is actually going to be a little surprising.
There's a few materials that I say just buy as needed.
But for this right here, I really want to encourage you to stock up on this when they're
on sale.
So you can see I have multiple packs right here because what I did was during the deal
days at Amazon during Amazon Prime Week in July, I stocked up on this material because
it was on such a good discount.
Anything over 20 to 30% that is a really good deal for you to stock up on material.
So as we get ready for the holiday season, what is that next big deal going to be?
That was probably going to take place in November.
So if you are just getting started with Cricut, I want to encourage you to stock up on some
of your favorite printable material so that you have a whole stash.
This will probably last me a year or so, which will be super, super fun to have it on hand
for no matter how many stickers you need, you're paying the best price possible and
you're not having to wait around because you've stocked up when it's on sale.
Now, we've kind of touched on this already, but what I want to encourage you is to start
getting into a habit of not just printing one sticker at a time.
If you're running a business with your Cricut, that is not going to be profitable for you
to waste an entire sheet of sticker paper, number one, or even personally, it's not a
good way to steward your material if you're only going to print one sticker at a time.
So here's what I do instead.
What I would do is I would start setting up my stickers on a Cricut project like I already
shared with you and either fill it in with stickers I know I'm going to use in the future
or just keep it open.
And as you remember stickers you want, start adding it to that project and all you'll do
is save it for when you're ready.
And once you have a full sheet ready to go and filled, then you'll go through that print
then cut process.
But let's say you need a sticker today and you don't know what stickers you need in the
future.
You can reuse sticker paper and we have a whole video for you teaching you exactly how
to do that.
I'll link it down below because it is really, really handy to know how to reuse scrap sheets
of sticker paper.
If you want to save the most money when you're using Cricut print then cut, guess what?
You need to make a solid investment into a printer that is going to support your print
then cut habits.
And let me tell you, the more that you print then cut, the more you're going to want to
use it.
It is very addictive and I love it because it simplifies so many of my projects.
This right here is the Canon TS9521C.
We absolutely love this printer.
You could do large print then cut, you can do 12 by 12, you can do regular letter size
and so much more.
If you're looking at other printers, I always want to encourage you to buy a printer with
this rear tray.
When you're doing Cricut print then cut, you're going to use thicker material.
If you're going to use magnet sheet, like printable magnet sheet, we love that.
You need this rear tray so it can seamlessly glide through the printer and it's not going
to, you know, get stuck in there.
It's not having to, you know, do anything that is not just straight through the printer.
I've tried to use the rear tray before and it does work, but every three to five tries,
it gets stuck in there and you don't want to have to deal with that.
So go ahead and avoid that by making sure you have a printer with a rear tray.
I've had this printer for, I think, over five years and it is still working so well for
me.
So that is proof that if you invest in a printer that is, you know, quality, it's going to
last you a very, very long time in your Cricut journey.
Our last hack is to make sure you're printing on the best quality possible.
If you are not customizing your print quality outside of Cricut design space, I'm going
to put you onto something that is going to change the way that you use Cricut print then
cut.
If you are not using this feature, chances are you're not getting good prints, you're
getting lines on your images, and so much more.
Here's what happens.
If you're not telling your computer to put out more ink, then what's going to happen
is you're going to start getting those lines in images, especially images that are very
dense in color, very colorful, and things like that.
You are going to run into that issue.
The way to prevent it is just tell your computer to tell the printer, hey, this needs to look
the best it can be.
Give it more ink so that it can look the best.
Let me share with you how to do that.
Over here, when you're sending to the printer, you're not going to select the printer you
have.
You're just going to turn on Use System Dialog and press Print.
When you click Use System Dialog, it's actually going to pop up in the back right here for
you.
You get to decide all of the settings right here.
I would go through, select the Canon, but what I want to show you is when we talk about
media and quality, we are not going to use the auto quality, the normal.
We're going to simply move this to Best Quality, and then we are going to make sure all our
other settings are right, and then we can print it.
That right there, my friends, are going to save you so much time, so much money with
your Cricut and your printer and your material.
We absolutely love Cricut Print and Cut.
I want to know what is your favorite hack down below that's going to help you save money
and time using Cricut Print and Cut.
Let me know what other Cricut Print and Cut trainings you would like in the comments down
below.
Subscribe to Maker's Going to Learn to learn all about Cricut and how to best use Cricut
Print and Cut.
Here's the deal.
For staying to the end of this video, I want to offer you a dollar trial to Maker's Going
to Learn.
For that dollar trial, you can download 20 images, which equates to five cents per download
for a seven-day trial.
You get seven days and 20 download credits for only a dollar.
Click the first link down below, claim that dollar deal here at Maker's Going to Learn,
and try out our membership so that you can make amazing stickers with your Maker's Going
to Learn family.
Check out our training, our Facebook group, and so much more.
I cannot wait to see you in the next Cricut video, so be sure to check out this one right
here.
See you in the next video.
Bye, guys.