Lecture 42

IIT Kanpur July 201
20 followers
1 Video View·Oct 24, 2023
Welcome back to the next lecture on the demonstration of the metal X 3D printer.
We have seen the demonstration very broadly in the previous lecture, how to set the printer,
how to put the components first in the printer, we get it built, then get it washed,
then in a sintering, we get it baked properly, so that we get the final component and as per the
dimensions that we have put. In the printing, their dimensions will be little higher, normally
20 percent higher, those will be taken care by software itself, but definitely we can scale up
and scale down the model based upon our requirements. Now, I will discuss the
connection to the eager software, that is, how do we connect to the cloud of the software that
is used for metal X printing here. So, printing using metal X, so let me connect to the software.
So, last video, we looked at the metal 3D printer, the software, we only talked about the software,
what is the software. So, we looked at the machine in the last lecture. Now, this is just a Google
interface that you could see. Now, in the Google, how to connect to the software, what is the
software and how do we save the files here, we can use the software at from any place, because this
is cloud based and we need not to have the big sophisticated systems, we do not need to have
a 32 GB RAM or may be very sophisticated graphic cards or so, because this is all cloud based,
only a good internet connection that could help you to see or work using the internet, just like
browsing a website. So, in the Google, we put eiger.io, if I click, it will show the first option
in the Google as Markforged. So, Markforged library, so already because we have logged into
this, log means the user ID is already saved in this. So, it will just log in here, it is asking
the software update. So, we will come to the updates later. So, it is Markforged software,
it helps here in the search window to search for the parts, folders, builds, devices. So,
first of all, the drawings that we are need to make, so we have to follow the specific process,
how to build the part, you have to see that. So, to make any part, so we need to understand
the location, the position, the feasibility of the part, whether the connection, the supports are
heavy or supports are to be put in the minimum possible positions as far as possible or whether
it is really legitimate to do it through using 3D printing, all these small things we need to see.
So, if the machining has to be there, what should be the thickness given to the component,
if threading has to be there, so then what strength has to be there at threading,
the infill has to be maybe more than 90 percent or maybe 100 percent if threading has to be there.
So, then we can use this software for all these small analysis, all these small
predefined specifications that we have. So, first we make a job. So, we need to see
the features of the job and anything that we build in this, first and foremost point is we
need to understand that the bed size that we have of this printer is limited. So, anything
fitting within that bedside could only be built or manufactured using metal-less additive
manufacturing Eager software. If the component is bigger, like you can see small sections here,
down there in the third row of the components, these are all parts of the one big body only.
So, these are all developed in a separate parts depending upon our bed size and these were later
welded or screwed or connected using nuts and bolts. So, there are multiple 3D files which
are available. So, there is a library. So, this is library, you can see multiple files here
and the left menu in the software you can say library as first option and you can see these
three rows with five parts in each row. So, we have named the file, then maximum of them
because MATLAB IIT Kanpur is the ID that we are using. So, it is being saved in this folder only.
Next we have the parts. So, in the parts if I click in the left menu,
this parts could be seen here. Each part how is it saved and how different names are there,
these are saved in different names. Then I have my parts, the parts which I have
specifically built. Some of the parts could have been imported from the third party,
those parts were there in the all parts. These are only my parts which I have saved here
in my specific folder. Then we have different folders here. So, these are different groups
of the parts like Shivam Sechan is one of the folders that one of these operators have made
or saved in this name. Then I have Appiment, this is one of the clients file, then Ashwin file,
McGig jobs, but different folders are there. So, in each of the folder it is showing in the
first folder 18 parts, in the second one 23 parts those were there. Next are the builds. So,
any of the parts which are put on the bed to manufacture to start the printing,
those are called as builds. So, if I open any of these files for example, this file is open,
this file is open and it is taking time yes 100 percent downloaded now. So, it is showing the bed
size, the complete bed size of the machine is being shown here. So, we can zoom in, zoom out,
we can select the component and position it somewhere else depending upon our requirement.
So, there are certain rules to position the components that I will discuss in the end of
this lecture. So, if you can see if this component in this position, if I suppose
invert this, then it would need to have the supports in between. In this case you can see
the small area just outside the component, this is known as raft. We could have brim,
we could have raft, this is a raft because it is the whole area the body is having
plane surface at the bottom, so a raft is required. So, now this is a component,
if I need to change the angle of this component or maybe try to reposition it, this could all be
done using this. The build details in the left you can say estimated print time, it is 1 day
and 22 hours like around 2 days or is it 24 for 22 would be that is 46 hours of the time would it
would take. Copper volume because the material that is that is copper only, so the copper volume
it is showing 110.29 cubic centimeter of the copper would be used, then ceramic release volume
would be 1.39 centimeter cube, then the material cost in UST it is calculating they have put their
own scale because this is a US based printer, it is showing 166 US dollars would be the cost of
printing this material. The name of the part is also put here,
w band final metal 3D printing dot stl. So, any of the files in 3D printing has to be
stl file, this we are now very clear with. Now, in the right detail menu you can see,
it is showing build settings, review and modify your build settings or printer type is metal x.
So, select printer metal x we only have this printer available, so for this software the
software helps us to build using other versions of the printers as well. So, right now we have
metal x here, the parts in build. So, we have put this component here. So, there are 2 copies
of this component. So, second component is showing 2 different component, if I cancel 1, if I cross
1 it will say now only 1 component. I can even add the parts, the similar component the same
component could be added or another component could be added. So, we can add part to a build,
add a part to w band like this present file that we have. This is a stainless steel,
first one is a stainless steel component, second one is a copper component. We cannot add separate
material components into one print obviously, because the spool that is coming is a single
spool. If it is a stainless steel spool, all the stainless steel components could be put here,
similar is the case with the sintering as well. So, if I say add component done.
So, it did not add the component because this component that I wished to add was stainless
steel. So, present component is of copper. So, it will add the component only if the metal
component is of the same size. Now, depending upon the talking about the size of the printers.
So, sinter 1 is the first or the base sinter that mark 4 developed. So, in that sinter 1 the
volume was around 4760 cubic centimeters, but what we have at MATLAB is a sinter 2 which is
a recent version which is around 22000 something cubic centimeter is the volume of the sinter 2.
But one thing is to be definitely taken care of sinter, temperature printer is all designed for
the specific material. Sintering for the copper would be different, for the stainless steel would
be different, the timing would be different, for the in colloid will be different. So,
all the components of stainless steel which would come in this volume 22000 something centimeter
cube that could be put in one go, but it has to be a similar material ok.
If there is anything required there is always a support here, there are available
get support for the call or for the chat. We can also print here you can see part view save build
print. So, like we looked in the machine how do we connect to the Wi-Fi the Ethernet. So,
here also we can just print directly while sitting out there provided the printer is set,
set means the bed and everything is set and the vacuum is created there,
then we can print it from here. Now, it says that yes printer or the print is ready to
execute it is the metal X ready. So, we can click here and see what is ready
printer is ready that metal X is ready sinter 2 is right now offline. So, we can click print
button at the right bottom and start the print. So, print will start taking place and it will
take this time 1 day 22 hours to build these 2 components ok. Now, this left menu we have seen
build settings menu in the right also we have seen part view save build.
So, we can click the part and look at the view if I select the part it will highlight this option
part view and we can view the part. Now, to look at the fine features of the part
we can also see the parts from the different views like top bottom.
So, you can see in the top it has a small groove here or groove or maybe the negative surface here.
So that means, if I would have put this in upside down it would have bring supports here. So,
this finish would not have come good. So, this is one of the ways that the plain surface as
far as possible has to touch the base of the table. So, raft would definitely be used. So,
that the final component that we get is having the perfect surface finish or the surface finish
that we required to bring accordingly. The hole sizes could also be seen and checked
whether these are feasible to be printed here using this printer whether the hole sizes fit
to the resolution of the printer. So, you can also see small grooves here the sizes of the
small half circles these minor details could be checked. So, the full detail of the components
given in the in the part details here in the left there are certain warnings.
There are 2 things number 1 is warning number 2 is error. Error means that is vital that is
that shall be corrected right warning means it may be corrected. So, this is how it differentiates.
So, in the part detail it is showing that 55.7 mm into 78.4 mm into 10.7 mm of the thickness.
This is the print dimension and the final part dimensions would be 48 into 67.5 into 9. This
reduction is due to the contraction in sintering. You can see from 48 to 55 around 10 percent or
15 percent of the size is increased to compensate the sintering contraction of this material.
The coefficient of contraction is different for different material. So, this is all calculated
by machine itself. Now the wash time, print time, dry time everything is mentioned here.
So, the print time is 23 hours 52 meter and the wash time for the ceramic and for the small
material that is there in the pores not the support material the ceramic material also enters
the pores of the material the main build that also to be washed it will take 1 day 3 hours.
After washing we have to put in a dry that is 4 hours of the dry time it would take.
Then printed part mass that is 339.14 gram of the printed part mass would become
and final part after taking off all the washing and everything would be 224.65 grams
and the metal volume that it is showing would be 55.14 centimeter cube.
The release volume would be 0.69 centimeter cube that will be used as the parting material to
separate the supports. Now on the right side you can also see the options here save internal view
and print. Let me see the internal view. Now it is showing the part view internally
how the part would look like. So, you can see this pink color here those are the supports.
In the slow motion also we can see there is a drag bar here drag here to select the layers.
If I keep on dragging it from left to right. So, I can manually just select the time frame
at which I would like to see the position or the status of the component being printed.
So, at around 40 percent of the time at about 50 percent of the time this much component
would be printed it is showing how it would go up right. So, here closely it would be 95 percent
and around 100 percent of the component printed. You can see the internal not exactly features,
but internal view of the component and how would it come and you can see the pink color this is
support the orange color is release green color is raft and the part is white color.
In 2D and 3D views could be seen it is showing the screen the blacks whether the parts could be seen
with more clarity. So, let me come to the part view once again.
So, we can just directly print it from here and it will go to the print.
So, we can directly print it from here and it will directly go for the print.
So, if I need to see in the metal X that what is the position here or what is the situation here.
So, in the screen it is showing that temperature metal temperature is 45 degrees release temperature
48 degrees of the print right now and the loaded material is this and this is the position or the
status of the metal X printer that is showing the printer is ready because the stainless steel is
already loaded there the ceramic release is already loaded there and the bed is ready
the metal temperature is 45 degree and the release temperature is 48 degree.
So, it is showing the printer is ready and we can just execute or start the print. So,
the machine status or machine readiness could also be seen directly from this cloud based software
because the machine is also connected to internet and it is connected
through the cloud to this software right. So, let me now come back these are all printing
options like preheat metal is there preheat release is there preheat bed then cool the
printer sometimes if we need to stop or hold in between we need to cool down the printer
that also is option available ok. Let me come back to the screen where the
component is shown already internal view is seen and then print is let me let us see the
internal structure of the component. So, let me try to see part settings at the
right side copy this part to modify its settings there are 3 options general setting and infill.
In the general option it is only showing the material that is to be printed here
material then we have the furnace type that is sinter 2 we have printer type.
So, let us try to see the material details in the lab ready once again. So, this component is there
w band yes now it is highlighting those options part settings in general then we can review and
modify our settings for printing here. So, it was copper before now it is stainless
steel here we can select from these materials see how many materials are available.
So, it is nylon white printer 17 4 P S steel V 1 and V 2 in colon H 1 3 tool steel A 2 tool steel
D 2 tool steel copper these all different materials could be used. So, this highlighted
blue color that is a selected material is 17 4 P H stainless steel. In the next phase titanium
aluminum these materials are also expected to come. So, this is an ongoing R and D to keep
on come bringing new and new materials. So, people have also worked somewhat in magnesium
which is considered to be very brittle material also, but still people have worked upon
developing small experiments using the printing in additive manufacturing using those materials.
So, we can select the printer or the we can select the furnace here sinter 1 and sinter 2 as I told
you the sinter 1 and sinter 2 because both of them have different volumes the timings would
also be different because to heat the bigger volume to heat the smaller volume the time would
obviously, be different. So, depending upon that the time for the overall printing including
sintering is calculated. So, we have selected sinter 2 this is only sinter variable that we
have at IIT Kanpur then the printer type is metal x. So, now, you can see the part is now I kept
perpendicular here just to show you another view. So, we can just put and drag it up and down.
So, if I would have put part like this for the printing finally, the down part would be having
printing down there. So, in the standing position also the printing time would be higher
and also the resolution the surface would not be as good as we wanted to have at the base of this
different orientations could be put here just to see what is the best possible or to have the final
best results which position we should be put in we can move it manually we can put the x y and z
dimensions here to rotate the component manually. So, we do not wish to change this. So, we lock
the orientation we say yes the orientation is not locked. So, with any other option this could not
be changed. So, it could be locked here then we can save this here it is saved here.
Now, it will again show the internal view the print. So, what you will have to see or you can
if you are very confident that this is correct you can go for the print or if you need to see
some more details you can just look at the internal views.
Now, next is the settings in the settings it is showing post sintered layer height it is showing
0.125 height in millimeters. So, for machining suppose if some job is required to be machined
we should know that what is the height what is the layer of the thickness of the layer
post sintered layer what layer do we have. So, that we can machine the component properly.
So, to what kind of machine is required is it only finishing the grinding only or do we need
to use the lathe machine. So, this is post sintered layer height depending upon the machining that we
need to have we can put these values here it is showing 2 values 0.050 that is alpha and 0.125
we can change these dimensions here. Then original units original units it is
showing metric and imperial. So, we can scale up and down scale up and down means this component
and whatever dimensions are given for example, the dimensions 100 mm if I to scale if I put
scale 2 the 100 mm will turn to 200 mm and all the dimensions will be double in proportion.
So, but it is also mentioned here is a note that part is ready what is already scaled up for to
account for the shrinkage this scaling up is not the shrinkage one. Now, next is support structure
and change the structure to cubic and again save it is taking it time to save the cloud
slicing is in progress feel free to navigate away from the space. So, it is passing it and
trying to create the cubic structure now. Now, again we can see the internal view
it is loading a tool pass now structure that is there support structure is this color what is now
showing the cubical structure if I zoom it more you can see how the support structure is changed
right. Now, let us try to see another option for the support structures that is radial separations
again the internal view. So, for the radial you can see how is it showing now
the support structure in pink color. So, now, it has now become a single piece and it is radial
to the cut volume that is there. So, it depends upon the what kind of support structure do we
require how do we fit the support structure properly. So, that the part is held in position
with as far as possible accuracy and it has to be an experience of the operator or it has to be the
software decisions itself to put the support structure because this is the manual input
depending upon the kind or the size of the support structure we can select different options cubic or
radial or so. So, we have seen the support structure in such settings. So, how to how
the support structures are support radial separations default support structure cubic
separations depending upon the requirement we can put different support structures.
So, whether it is a circular support or whether it is a straight support.
So, what surface do we had at the top of the support. So, depending upon that we can have
then support radial cuts could also be changed some 2 to 16 how many cuts of the radial do we
have. So, it is it depends upon how difficult is the support structure to be removed. So,
how many cuts do we have accordingly then overlay transform is also there then overlay if it is
there suppose if something is overlaid how do we transform that into r dimensions.
So, next is infill in infill we have the fill pattern the fill pattern could be triangular fill
gyroid fill and solid fill this is a triangular fill which we showed this infill is a triangular
you can see small triangles are here only. So, these triangles are infill only right.
So, this is the triangular fill now let us try to see the another form that is gyroid.
What is gyroid? Gyroid is actually infinitely connected triply periodic minimal surface which
was developed. So, gyroid actually I would say is an analogy equivalent to an organic
kind of the flow. So, as you can see a gyroid infill here. So, this is gyroid
now yeah this is gyroid this is gyroid you can see the flow of the layers it is completely almost
free. So, this is a almost a zigzag motion. So, this is gyroid fill we can put different
percentages for different kinds of the fill. So, example for gyroid fill we can put exposed
infill as snowed yes then roof and floor layers will be required how many layers in the roof and
the floor do we require 0.50 mm post sintered layer how many layers of 0.5 mm post sintered
are required 4, 6, 8, 10, 12, 14, 16 then wall layers could be increased here it is 1 mm post
sintered layer the post processing that is required that is the machining or surface is
required setting is required based upon that wall layers could be increased here this wall
layer could be increased 1 mm post sintered. So, in the solid fill we can just say it is
only asking the wall layers here it is again calculating and computing the path.
So, in the solid fill let us again try to see the internal view. So, it is a complete solid
you can see it is almost a solid and completely filled solid. So, this is how a solid fill looks
like. So, solid fill and the status at different percentages 50 percent when we have 40 percent
we have around 25 percent of the print completed you can see how the solid fill is completely
showing it filled with the metal right. Now let me come back to the part view once again.
So, we can save this whole data. So, let me come back to the triangular fill and save the file
it is again computing the path fine uploaded and it is all saved in the triangular fill once again.
So, this is the general settings the general options which are available the settings options
and in filled options and part details again is mentioned in the left hand side.
So, we can copy the part we can update the stl file we can rename it or we can save it in different
name we can download the stl file we can delete the parts here. So, in the library. So, in the
eager software again we have come to the library once again where we have seen the components which
are saved here and let me open another component here this is a drawing suppose this is a drawing.
So, this is a big drawing and this is a little complex drawing if we if I put it in this
direction you can see what heavy support would it require and definitely this could also be
one of the options to put it and print it, but suppose if I put it in a different orientation
that will require even more support. So, it will calculate the support the software
will calculate the support and the time itself and wherever the minimum time is we can put it
accordingly sometimes the component is also put in an angular position as well.
So, we can calculate the details here this is another way we have inverted it we have we can
put it in a vertical position this is this is surely not a recommended position it is showing
big errors errors means it shall be corrected right warning it could or could not be at an
angle how would it look like. So, a different components have different
orientations and depending upon the minimum possible orientation minimum possible time that
we have we can put the components for that let me have a quick look on the recommendations which are
there. So, there are small suggestions like how to optimize for printing how to optimize for
washing and sintering and general strategies specifically in metal x 3d printer
some suggestions in optimizing for printing first point is identify the critical dimensions
you can see the hole that is 6.6 millimeter into 2 holes are there these holes are put here
horizontally. So, this is my print bed here and on the print bed it is just kept horizontal because
the precisions in the planes parallel to the build are higher in 3d printing and that is
discussed previously in the previous lectures as well along the x y directions the precision is
higher this is how it is kept. So, identify critical dimensions and try to see where the
strength is required higher. So, that would be kept on the bed accordingly. So, this is
how do you do and maximize the bed contact you can see this flange this protruded surface this is
connected with the bench. So, we maximize the bed contact because the more surface area with the
print bed it reduces or minimize the supports and improves the bed adhesion as well.
So, which face of the part would contact bed which orientation would be best for this,
this has to be taken care of then we reduce the number of the supports.
So, in this case you see the fewer supports are required. So, this is one this is another
orientation. So, number of supports which could be reduced. So, fewer supports means
few or the less wastage of the material how do we design to minimize the supports.
So, are the supports in our part completely accessible or not this has to be taken care of
then optimize for your production workflow. Production workflow means how do we align how
do we set the components. So, that the raft that is required is connected and the maximum utilization
of the surface is there. So, this is a general setting or the casting or you may be in stamping
as well these kind of settings the proper layout of the components is always there.
So, it is considered overall the overall throughput of the component like for in the one go of the
printing in the single run of the print what maximum number of the components could be produced
this will maximize the batch size this will minimize the batch costs. So, this is how it
and the infill also could be designed here like solid infill is required or not or do we need
90 percent or lesser infill what kind of infill would we have. So, this also minimizes or
optimizes the cost of the printing. Then we modify the overhangs to optimize
supports overhangs means for example, in this case the support is required this will be overhang this
is a kind of a cantilever. In this place suppose if I provide this kind of the angular feature
in my component what would this help us to do it will we will chamfer the small overhangs
and it will bring more strength here because this part strength would be lesser here.
So, this is correct similarly in the tear drop x y holes to clear channels. So, as the to clear
channels the x y holes you can say those are also connected in this way the simplified support
removal support removal this support is difficult to be removed. So, example these components here
down there. So, we try to divide the supports into different parts. So, that it could be removed
simply and also slits are also made here slits are also separated here these slits are there
to separate the components this is 1, 2, 3, 2 is my support. So, to separate the components again
a delineation proper has to put in between them. So, that is also here now to optimize the washing
to shell out the thick parts this is the complete thick component right.
In this case in the second portion you can see small slots are provided small cuts are provided
what does this help us to this minimizes the overall area overall volume that is to be washed.
So, the thicker our part is it will be definitely longer time it will take to wash.
So, we cut down the volumes to increase the surface area to increase the surface area here
surface of contact to the wash liquid would be higher. So, this will also help us to
spend time in the wash and my time would be minimum that we will spend in the wash.
So, also we need to maintain the consistency in the wall it is to be also taken care of.
So, wash bowls upside down. So, slower wash time it is having faster wash time because when it is
kept upside down and the washer solvent by weight is lighter than the binding material.
So, it permeates into the bowl if it is kept upside down. So, regarding printing, printing
can be done in this way only, but washing has to be done in this way. So, that the wash time is
minimized. Then a small data that is provided by metal actually that solid triangular infill
wash time this is a triangular infill black one the dark gray is triangular infill with maximum
wall roof or floor layers then solid infill. You can see for 10 mm, for 25 mm, for 50 mm
how the cross sectional thickness is varying and the time it is taking. So, for the 50 mm for the
complete solid infill in comparison to the triangular infill it is around it looks like
10 times of the time it is taking. So, it depends upon really do we need the
complete solid infill or can we reduce it. So, this is a really a critical decision that
has to be taken. Now solid triangular infill dry time as well. So, for the triangular infill
for solid infill you can see for the different cross sectional thickness is again the time
for 30 mm, for 40 mm, 50 mm or for 60 mm. The time for triangular thickness is just
this small units only, but as the thickness is increasing because it is solid infill here
the time is increasing and this time again maybe more than 10 times of the time it is taking
for drying of the infill. So, this is in the wash how do we select between the triangular and solid
infill and how do we compare them with the thickness of the walls. Now for sintering
there are certain suggestions reduce the stress concentrations because in the sintering contraction
has to happen and the contraction the edges here you can see this edge here and this edge here.
This is a chamfered edge. So, we smoothen the transition to reduce the deformation
in the sharp edges may cause deformation during sintering because this sharp edges would
induce in themselves thermal stresses and the when sintering happens the contraction happens
they pull themselves together as they shrink. So, to reduce the stress concentration. So,
filleting or chamfering is suggestible. Then we ensure that features are well balanced because
the contraction has to happen this is a cantilever feature. So, it will try to fall down.
So, this is toppled down and this balance feature. So, that this kind of the flaw does not come in
the final print. Then we have the disable part rafts. The part rafts for example,
they are different rafts a good candidate for raftless printing use a raft to avoid distortion
when sintering. So, when metal x parts are printed with a raft for rafts always make sure
that a good adhesion to the print sheet and uniform part shrinkage during the sintering is there.
Though this is clearly labeled with the material to help prevent mix ups. So, one might consider
disabling a raft for smaller parts and to have good first layer contact. So, that raft even if
it is not there the first layer of the print bed that would cover its absence. So, the good
first layer contact with the print bed and lack features that require a raft to prevent distortion
in printing that is also taken care of and disabling the raft will produce much smoother
surface at the bottom at certain times. And also small things like for example,
this is one component it is let me say this is a component it is sharp at the bottom.
In the shrinkage this would also induce stresses just like this just like this. So,
it can also have a chamfer here chamfer or fillet here right this is correct this is not correct.
So, the bottom edges could be chamfer fillet could be avoided and suppose if there are
some components in which height to width ratio is very high it is 6 times of it and this is
a component for example, and this is let me say 2 mm phi 2 mm and this height is 15 mm.
So, in this case it is suggestible to have a component something like this right this is phi
2 mm this is phi larger than 2 mm larger than 2 mm right. So, that the tall or thin features
which are more than 6 times of their cross section height you should not be freestanding.
So, for this freestanding features a draft angles should be provided like this angle is provided
here. So, this will help them to not to topple or lean when they are printed. So, this could also
be one of the suggestions. So, then some strategic printing practices which are again suggested here
in general are use pins for alignment features. Example these pins are provided this is a straight
or fixed component these are the pins which are used for alignment.
So, to improve the alignment precision and save material and print time by pressing doll pins into
one spot or using shoulder bolts for the location. So, doll pins pressed into the gripper jaw locate
it onto a robotic arm. So, this small change in the design reduces the supports and it also
simplifies the print orientation. Similarly we can separate printed from simple features.
For instance this is an impeller in which the simple shaft is here. So,
impeller with an integrated shaft is one option impeller with a separate shaft is another option.
So, when we get an impeller with the integrated shaft this will sacrifice the optimal print
orientation for the furnace orientation. So, it can be only fit in the center sideways only
right because it is impeller this is fixed here right. Now if this is printed in a separate part
this becomes a single component now this could be put in the center directly like this right.
In the center it could be put directly and we can just center it right otherwise in the center base
it would have been put like this this is a shaft this is a shaft only in this way it could have
been put. So, to separate the components so that in the center we can put them properly.
So, we can isolate properties with modular features as well this is a component which
is now again developed in modules module 1 and module 2 right this was a single component.
So, to separate the components in modules means we can isolate the metal insert and separate
the part that localizes metal properties to only the region where they are required.
So, then also it is suggested that do not print your hardware like bolts, bearings, springs,
washers these are available generally in the library. So, these are not suggestible to be
printed directly. So, with this the demonstration on the metal X 3D printing is completed and we
have seen how do we set the printer how do we use the software for printing and general suggestions
to put the component into the print into the washing and into the center that we have discussed
in this lecture. We will meet in the next week and try to discuss more on the costing
the safety features in metal additive manufacturing. Thank you.
