Lecture 08

IIT Kanpur July 201
20 followers
Oct 22, 2023
Namaskar, in the last lecture, we saw about plate tectonics and on your screen, we explained
how the plates moved from their place in the southern hemisphere and after that they started
to move in the eastern hemisphere and we also saw how the mid-oceanic ridges were formed
and this area is called the spreading centers and lava continues to flow in this area and
after that we also saw that our country Bharatvarsh, which we call the Indian plate, started to
move in this area and we also saw that our country Bharatvarsh, which we call the Indian
plate, started to move in this area and after that they started to move in this area and
this is called the Eurasian Plate Collision.
We will learn more about this later.
Let us move ahead.
So, the kind of structure that is formed on the whole earth, which we call plate boundaries,
they look something like this, where all the continents are there, which we call lithospheric
plates, which we have talked about earlier, so how they collided from one plate to another
plate and how other landscapes were formed.
And finally, when we talk about this lecture or in the lecture after this, how the Himalayas
were formed, we will also discuss about that.
So, these are all plate boundaries, which are shown here, these are its symbols.
This is what is told, these are your convergent plate boundaries.
So, these convergent plate boundaries go inside one plate from another plate.
So, that means we call it subduction.
So, this convergent is going inside one plate from another plate.
And we will also learn about this that why these plates are going down.
One very important thing about this is that it affects the density.
So, the heavier density plate will go down in comparison to the lower density.
So, higher the density, your converging will go down.
And this is what we call subduction zones, convergent plate boundaries.
There are divergent plate boundaries, which you will see on your left.
So, these are the plates, which are separated from each other.
So, these are called divergent plate boundaries, in which we were talking about sea floor spreading.
So, from where lava continuously comes up, these also go away from each other.
In convergent, it comes close to each other and one plate will go inside and the other
plate will go above it.
So, this is one boundary.
There is another boundary, which is called transform plate boundaries.
So, this one will be convergent, the other will be divergent.
And the third plate boundary is that it goes along with each other, but it slips like this.
This is called transform plate boundaries.
So, if we look here, if there are two plates, then it will either go like this or like this.
So, these are the three main plate boundaries, which we see on the entire earth.
There are some areas in which we have not yet seen plate boundaries.
There is uncertainty in those boundaries.
But it is possible that those boundaries are not there, but rock types are different,
that is why it is visible.
So, there are very few like this, but these are shown in yellow lines and these are your
uncertainties.
We will mostly talk about some of the main plate boundaries, because they are also related
to hazards and why they are there, I will tell you later.
So, let us go ahead with this.
Now, it is said that all these plates, which are small pieces of the earth, have to be
moved.
This movement, as we talked about in the last lecture, it was explained scientifically
that the shapes around it, if they are matching the boundaries like this, then this matching
was not enough.
And it is also said that it moved from one place to another.
So, we need some concrete evidence for this too.
So, if it is moving now, that there is still movement in those plates, then how can we
find out from this?
So, a very accurate study is being done, which we call GPS measurements.
So, it is a global positioning system, we measure it and it has been placed in every
plate at different places.
Like we have also put it in the Himalayas, some IT Kanpur has put about 14 to 15 stations.
There are 2-3 more such institutes, they are working, like the Wadi Institute of Himalayan
Geology, NGRI, National Geophysical Research Institute in Hyderabad.
They have also put a lot of stations and from these stations, the GPS, like we use in
mobile phones, it shows you the location, coordinates, latitude and longitude.
Now, this plate motion is very slow, we do not feel it, we are not able to feel that
it is moving, but it is moving.
This is the reality of it.
So, this is the motion, if you see the arrow, it is shown to you, it is a scale of 10 cm
and it is 5 cm per year.
And if we talk about India, then we will talk about it at the end also, but it is not
close to it, it is increasing from 45 to 50 or 55 mm per year.
And its direction is North-North-North-North-North-North-North-North-East.
So, it is moving in this direction.
And how was this found out?
By GPS stations.
So, there are GPS stations on all such continents on the earth and there are some stations
whose data is servogenic, it is given to everyone, you can use it from each other.
And they call it IGS stations.
So, that data remains available internationally.
So, on the basis of that, all these arrows that you are seeing, if you look at it and
compare it with this, then you can guess that some plates, their velocity, their movement
is very fast, it moves very fast.
And as you can see, if this is 10 cm, then you can see about 10 cm here.
This plate, I am telling you now, this is the plate of NASA and this is the plate of
South America.
These two are together and this is the oceanic plate and this is the continental plate.
Whichever green part is visible, the green part is visible on the earth, they are all
your continental plates.
And this blue is your oceanic plate.
Now, you will see, as I explained in the last slide, that if this is convergent, then
this plate is going below it.
So, if I make a cross-section of it, in the middle, suppose we take a cross-section
of it, then how will it look?
This plate is going like this and this is coming above it like this.
So, this is the plate of NASA, it is going below you and this is your oceanic plate.
This is your oceanic plate and this is going above it.
This is going up, this is your continental plate.
So, when pressure is created here, then definitely mountains will be built here and all this
is happening.
Now, we will know more about it that these plate boundaries, we call them convergent
plate boundaries.
We are calling it convergent plate boundaries or we will also call it subduction zones.
We will call it subduction zones.
And these boundaries are very dangerous.
They are dangerous because, we will try to know more about it later, because in the middle
of these plates, which is your NASA plate, NASA plate and South American plate, because
of collision in the middle, this is going down and this is going up, here two plates
are colliding.
This is important for us to know. If we ask this question, the answer is yes, because
we also have similar boundaries in our country. This is the boundary here. And what is the
earthquake here? It is of 2004. In 2004, there was a big earthquake, 9.1, 9.2, 9.3, 9.4,
9.5, 9.6, 9.7, 9.8, 9.9, 9.9, 9.8, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9, 9.9,
9.3. In these locations, these are very dangerous.
So, now we will take the next slide.
will say that why these two plates, both collided with each other, so there is also density
in this, we will talk about that later. So, keep in mind that the density of the plate
is that of the oceanic plates. The density of the oceanic plates is higher, the density
of the continental plates is low, comparatively. And we have explained this earlier when we
taught about the interior of earth. Let us move forward in this. So, it will be that
of the ocean, the density of the ocean is that of the continental plates.
So, when the pressure is suddenly released in the middle of two plates and the pressure
is created in the rocks and in the middle of the sediments, then that is your earthquake.
So, if we look at the plate boundaries that we were looking at in the back, then in all
these plate boundaries, you can see the locations of earthquakes.
So, this also shows you that these are the plate boundaries that create earthquakes.
And where we said that there are subduction zones, which are going from one plate to another
plate, there is more danger because they create large magnitude earthquakes.
So, that is dangerous for us.
And if we have this equation, then we have both the boundaries here.
There is also conversion and collision boundary.
We call it a collision boundary, which is in between the Himalayan plate and the Eurasian
plate.
The second thing is that we will talk about it later, that along with earthquakes, there
are also volcanoes here.
And when do volcanoes form?
When does it happen?
It is a very simple thing.
So, if we assume that this is the plate, we make a cross-section of the Nazca plate
here.
So, if we take this xy, then if you see that this is your Nazca plate, this is going down
and this is your plate, that is your South American plate.
This is the South American plate and this is the Nazca plate.
Now, when this plate is going down, then what do we have?
There is a stenosphere and then we say that the mantle part.
So, when it will go, it will start melting here.
The rocks will melt.
So, they come up here and make volcanoes.
So, you will find volcanoes here.
This is ours.
You will not find it in the front.
You will not find it in this area ahead of it.
But in the back side, in this area, there will be volcanoes here.
And this is here.
So, we will talk about it later.
So, wherever there is such a subduction, where one plate is going down, because it has a
source that will melt it.
After melting, all this lava comes up and from your magma chamber, it comes up and makes
a volcanic arc.
So, volcanoes will be there.
Now the question arises, is this in the Himalayas?
So, it was earlier.
Why was it earlier?
We will talk about this in the end.
So, if you see, all this area, all this area has active volcanoes.
This is Japan, this is America, in America also USA, there are also volcanoes there.
And if we take this Sunda arc here, Sunda, we call it arc, there are volcanoes here too.
Because one plate is going under the other plate and we get the melting part here.
So, this has also been seen in another way that distribution of earthquakes and active
volcanoes.
That is, where the earthquakes have been distributed, where the volcanoes are, if
it is seen, then you will see something like this.
So, in this slide, it has been shown that all the yellow dots are earthquakes.
Small, big and large magnitude mega earthquakes, or call it great earthquakes, all these will
be found on this line, where these two plates are either colliding or subducting each other.
And this is our Nazca plate and this is South American plate.
So, in this, you will see that apart from the yellow dots, you have these triangles.
What are these red triangles?
These triangles are all volcanoes, active volcanoes.
So, there are earthquakes and volcanoes, but volcanoes are not everywhere, earthquakes
are there.
So, if you see in this way, then the plate is not going down in the Himalayas and this
area.
So, that is why you do not see any red triangle in this.
So, these are all your collision boundaries.
Either they are just coming out of each other, that is, we say that it is having lateral
movement, there is nothing else in it.
So, if we talk in detail, then we have plate boundaries in which the distribution is not
the same everywhere.
Distribution of earthquakes is not the same everywhere.
Distribution of earthquakes and volcanoes are not the same everywhere.
It depends on which plate boundaries you have.
So, it has been shown that wherever you have subduction zones, you have active volcanoes.
So, this is one very important thing that we talk about.
So, this is one important thing that we talk about.
So, there are three plate boundaries.
One is divergent plate, which we have talked about.
So, it is where a new plate is always formed,
where new crust is generated as the plate pulls away from one another.
So, this is the divergent plate boundary.
Convergent plate boundaries, as we were telling in the cross section, are like this.
So, this is inside the water, but if it is mapped, it will look like this here, and this
will be your convergent plate boundary, where your oceanic crust is subjecting to the continental
crust.
So, this is a very important part.
So, we have two, we have divergent plate boundary and convergent plate boundary, and the third
is the transform plate boundary.
So, if we look at the transform plate boundary, then if we look at this place, then this is
moving.
This is called the transform plate boundary.
Although, this is with the spreading center, where your axis is, this and this is moving
here.
This was here earlier, moved these two, but if we want to look at it on a larger scale,
then the convergent plate boundary you will see, where the transform plate boundary, like
the sand entry asphalt system is very big, it is very dangerous, that is your transform
plate boundary.
And as we move forward in this course, we will explain to you what are the faults, the
faults that we get with the plate boundaries, how we look at it in detail.
But what we are seeing now, we have three major boundaries in it, which we have to
look at.
So, first one is the divergent plate boundary, second one is the convergent plate boundary
and third one is the transform plate boundary.
So, if we look at it in detail, then we will see that how these two plates are moving in
relation to each other.
This is divergent and this is convergent, in which this portion is going down, this
convergent plate boundary.
So, these are the three boundaries.
One more important thing is that what is your divergent plate boundary?
We are saying that where new surfaces are always formed.
So, it is also called that this is a sort of a constructive plate boundary.
We call it a constructive plate boundary.
And where the crust is being destroyed, that is your divergent plate boundary, we also
call it a destructive plate boundary.
So, this is the constructive plate boundary and this is your destructive plate boundary.
And what is happening here?
Nothing is happening, neither the plate is moving.
Although, as I said, in the San Andreas fault system, we see both the motions.
So, when we talk about the San Andreas fault system, then we will see that one plate is
going down and at the same time it is moving like this.
So, in that, we have a transform plate boundary, but there is also a little pressure in it.
So, we have three plate boundaries.
So, nothing is happening in these transform plate boundaries.
Not destroyed, but it just slides past each other.
So, this is our divergent, which is going to two plates separately, magma is coming
up.
So, we call this as spreading centers.
And where the subduction, this plate is going down, we call it subduction zone.
And here we call it transform faulting, where one plate is sliding between the other plate.
So, we have these three plate boundaries.
Now, divergent plate boundary and constructive plate boundary, we will look at.
We talked about this earlier in a lecture, that we talked about magnetic polarity, in
which your polarity changes.
And in that, we also talked about geodynamics.
So, refer to it, then you will know.
So, we got this information in the Second World War.
In the Second World War, they wanted the oceanic plate of water to be mapped properly.
So, they were mapping.
So, Haynes and Deitz, they gave the convention theory.
And they said that the theory is called sea floor spreading.
So, the sea floor of the sea is spreading.
You are moving away from each other.
And in this, they said that when its dating was done, its age was taken out, then it was
found that as you move away from it, it will get older.
This is old, this will be young, and this is youngest.
So, this is how they found out.
And they said that this is constructive in this.
The plate is not always being made.
Now, what is not being made, it is also ending somewhere.
So, we stop here for today.
And in the next lecture, we will talk about it.
In this, we talked about the divergent plate.
We will also talk about the transform plate boundaries.
And we will talk about convergent plate boundaries.
And we will also talk about collision, which is related to the Himalayas.
So, thank you very much.
Thank you.
