Lecture 14 Module 02

IIT Kanpur July 201
20 followers
Oct 22, 2023
So, up until now, we have been discussing common source amplifier and various aspects
of it.
So, you must have noticed that we have been using some something, we have been using a
series combination of two sources in order to add the incremental output or incremental
input to the bias, right, but what do I mean by that?
So, we wanted to bias the transistor, to bias the transistor we needed a battery of value
Vgsq and also we wanted to, we wanted to apply the incremental small signal equivalent and
for that we needed to add another signal, so that it adds to the voltage of the battery
and how can you add?
You add two voltage sources in series, the voltage adds up and that is what we did, we
essentially said that this is what our structure is, if this is Vi, this is Vgsq, this voltage
will be Vgsq plus Vi, ok.
Now, while this works perfectly, there are some practical issues with it and what are
those practical issues?
One of the very most important practical issues is that you cannot, not often you can have
access to two terminals of a battery, right.
What I mean by that is, let us say you have, when you, when you want to use, typically
when you want, when you are making an IC, when you are making a chip, right, you have
one master power supply and you have to derive all voltages, all subsequent voltages that
are needed from that power supply and typically that power supply is the highest power supply
that is available anywhere, right.
So, now let us say you have this Vdd corresponds to that power supply, right, whatever, I mean
40 volt or 20 volt or whatever power supply that you have or maybe 5 volt, this Vdd is
the maximum power supply, but that is the only battery that you are allowed to have,
right.
So, where from will you get, where from will you get this battery, Vgsq whose, where you
need access to, where you need access to both the terminals.
One might say that I do not want to, I do not want to use this, I can as well say that
instead of doing this, I will do this, I will use a smaller battery and a voltage source
in series and this value of Vgsq, I have derived from Vdd, right, fair enough, fair enough
argument to make, right.
I have a Vdd, I have a battery Vdd, right, I put a register divider or something and
I reduce the value to the required Vgsq value and that acts as a battery and then I apply
my input as I have shown here, the output of that, the terminal, the gate of the MOSFET
will be Vgsq plus Vi, right.
If you can do that, this will work, but there is another issue, the issue is how would you
get this Vi?
Very often this Vi, you do not have access to both terminals of the signal source.
One very common example is when let us say one stage is driving another stage, right.
So, let us say there is one stage, one amplifier stage whose output is this and this output
is reference to, let us say V01 is reference to some ground, okay and this is supposed
to drive another amplifier stage, which is also reference to this common ground, right.
What I am trying to point out here is that in the picture on the left, you are assuming
that you have access to both the terminals 1 and 2 of the signal source, but in reality
you probably have only access to terminal 1 because the other terminal is implicit ground,
right.
So, the problem essentially is that we seldom have access to both nodes of the battery or
even the signal source, right.
So, the problem is we seldom have access to both terminals of a signal source or a battery
inside an IC, right, which essentially means that even though you can put two batteries
in series in principle, you can buy one battery from the market, you can get another battery
from the market and put them in series, but you cannot do that in practice when you are
building an IC, right.
So, implication is, consequence is, you cannot put two signal sources or batteries in series.
Note that this is a constraint in an integrated circuit environment, right, if you are getting
batteries separately, right, this need not always be a constraint.
However, if you are in the lab and you are using a signal source, you can see, if you
have been in any analog circuit lab, you will see that signal sources are these big boxes,
right, out of which two wires come out, one reference wire is almost always grounded,
right.
So, in, even without, even in an environment where you do not have to deal with the idiosyncrasies
of an integrated circuit, it can become difficult to put a signal source and a battery in series,
right.
So, the crux of the problem is that we cannot do this.
If we cannot do this, what else can we do?
So, that will be the, that will be the point of discussion in the rest of this lecture,
ok.
So, so what is the issue?
The issue is, I mean to rephrase the issue, we want, we want a scenario where we want
to have a signal source and a battery combination like this, where this has to be the MOSFET,
right.
And this I can assume to be ground because, I mean the signal source is, is being driven
by somebody where there is an implicit ground, right.
So, we want this combination, right, we want to get this combination, but the problem is
that we cannot stack two signals, one signal source and a battery like, like this, right.
Now, in order to, in order to resolve this problem, we will have to go back to the fundamental
definition of a battery.
So, what is a battery?
In principle, what is a battery?
A battery, right, so a battery is a source or let me say an ideal battery, ideal battery
is a source of infinite charge, right.
Why do I say so?
Because I say that because if I draw, if I put a current source in parallel with it and
I keep on drawing, what is the current source doing?
The current source is drawing charges out of the battery, right.
So, even if I keep on drawing charges out of the battery for infinite amount of time,
the battery will still hold a value of whatever it was supposed to hold, which essentially
means that the voltage across the element has not really changed, even though you have
been able, you were drawing, you have drawing charges out of it for indefinite amount of
time, right.
So, in other words, I can say that it is a ocean of charges, right, it is a battery is
an ocean of charges, even if you take few buckets of water out of the ocean, the level
of the ocean does not really change.
Similarly, even if you take few coulombs of charge out of the battery, the voltage of
the battery does not really change, right.
So, now, I mean, what is the equivalent analogy?
What do you think among the elements that we know, right, among the RLC elements that
we know, which element corresponds closely to this behavior of a battery, you guessed
it right, it is a capacitor, right.
A capacitor, an infinitely large capacitor is indistinguishable from a, from an ideal
battery, right, right, why do I say so?
Let us say this is an infinite, infinitely large capacitor, let us say I call it C infinity
and I have, I have a voltage, let us say V bat across it, so what is the charge?
The charge will be, Q will be C infinity times V bat, right and if I draw some charge out
of it, right, if I draw some charge out of it, right, so let us say I draw delta Q charge
out of it, correct, so what is the net charge?
What is the net charge after I drew delta Q charge out of it?
The net charge will be Q minus delta Q, right.
So, after I drew delta Q charge out of this battery, what will be the voltage across the
battery?
The voltage across this is V nu will be the charge divided by C infinity, correct, so
I get Q by C infinity minus delta Q by C infinity, what is Q by C infinity?
Q by C infinity was V bat minus delta Q by C infinity, what is delta Q by C infinity
under the assumption that C infinity is infinitely large, yes, so limiting value of delta Q by
C infinity, where C infinity tends to infinity is 0, so this goes to 0, which means V nu
is equal to V bat, right.
So, in other words, an infinitely large capacitor is indistinguishable from a battery.
Now, you might turn around and say from where will I get an infinitely large capacitor,
I agree that is a problem, we will address that somewhere down the line, but for the
time being, let us assume that it is a large enough capacitor, right, it is a large enough
capacitor, which is able to, which probably will be able to act like a battery, right.
What is large enough, we will define later, but let us assume that we have taken one step
forward in replacing, in replacing a battery, right.
So, if we, if we, if we, if we agree with this, right, if we agree with this, what is
the solution?
The solution is I have a voltage source E i and I wanted to have a battery, right, I
wanted to have a battery having V gq, but I cannot have a battery, what is the alternative?
The alternative is replace the battery with a C infinity capacitor, right, but what is
the charge across this capacitor?
If we do not do anything, the charge across the capacitor will be 0, right, which means
we will have to somehow, we will have to somehow charge the capacitor with a value of V gq,
right.
So, how do I charge a capacitor?
One way to charge the capacitor is to say, so let me do this, let me apply a battery
here of value V gq.
If I do this, right, what will be the charge, what will be the charge across C infinity?
Assume for this, assume for the time being that V i is equal to 0, right, if V i is equal
to 0, what do you think will be the voltage across C infinity?
The voltage across C infinity will be V gq, right, right, if V i is equal to 0.
Now, so this is V gq, if V i is equal to 0, but does this solve the problem?
Now let us assume V i is not 0, now let us assume V i is not 0, if V i swings, what happens
to this gate voltage?
The gate voltage as you can see, does not change, why?
Because it is connected directly to the battery V gq, correct, so this gate voltage is connected
to a battery V gq, whatever happens to the rest of the world, the voltage at the gate
of your MOSFET will not change, correct, so that is a problem, is not it?
So what is the solution?
So to understand this, let us try to figure out what is the root cause of the problem.
So let me redraw, let me get rid of the MOSFET for the time being and let us concentrate
what is happening, ok.
So the problem here is when the input is swinging, right, when the V i is swinging, when V i
is swinging, this voltage is stuck at V gq, right and where is this, where is this incremental
current that will appear due to this V i, where will it go?
The incremental current, however large it might be, will go into, will go into this
battery and because the battery gives you no impedance, right, battery is essentially
an ideal short, right, if you use superposition, what will you do?
We will essentially say that V gq is an ideal short, because it is an ideal short, the current
that is flowing out of V i is not able to change this voltage V g, right.
Since this voltage, we are not able to affect this voltage V g, simply because V gq is an
ideal short, this is causing, this is causing the problem, correct.
So what is the solution?
We cannot have, we cannot have an ideal short, but we also want, but we also want the voltage
V g across, across the capacitor, right.
So if we, if we, if we now divide this problem into, into two, into, into two different sub
problems, right, and we, we say that while we are, while V i is, is, is a sinusoid, right,
this battery here is a DC, right, V i is, is getting applied at frequency omega naught,
however the battery V gq is at a frequency, frequency 0, right.
So, what is the, what is the impedance offered by the capacitor?
What is the impedance offered by the capacitor at frequency 0?
At omega equal to 0, i.e. for V gq, for the battery V gq, C infinity offers infinite impedance,
why?
Because, because the impedance offered by a capacitor is, of the capacitor is 1 by,
1 by omega, omega times infinity, if omega tends to 0 or omega is exactly equal to 0,
then the, then the, I forgot to put the j, then the mod of z, zc is essentially, essentially
infinity, right.
So, what is the moral of the story then, the moral of the story is that the capacitor is
giving you infinite impedance to V gq, right.
Now, what impedance does C infinity offer to V i, so since zc is 1 over j omega C infinity,
so if omega is equal to 0, zc is equal to infinity, right.
If omega is equal to omega naught, what is zc, zc is equal to 1 by j omega C infinity
and under the condition that C infinity tends to infinity, what do I get?
This offers 0 impedance, right, so in other words, C infinity offers, acts as a short
circuit for omega naught, correct, let me highlight this, these are vital conclusions
and it should not surprise us that C infinity is acting like a short circuit for omega naught
because what was C infinity replacing, C infinity was replacing a battery, right and
a battery, what is the incremental equivalent of a battery, the incremental equivalent of
a battery is, of an ideal battery is a short circuit, right.
It should not, it should not be surprising that C infinity acts as a short circuit at
omega naught.
However, a battery also gives 0 impedance at dc, however a capacitor does not, so that
is a key difference between a battery and a capacitor, right, so which a capacitor is
a frequency selective circuit, a frequency selective element which essentially means
that at 0 frequency, it gives you infinite impedance.
So now, can we leverage this, can we leverage this and see if something can be done.
