Old bakery racks make fantastic solar dehydrators! With simple window screen panels, trays, and a door, you’ll be churning out all sorts of dried foods!
We repurposed a bakery rack that our friends Jesus and Kim gave us. With 18 rack spaces, it was an easy jump from holding cooking sheets to dehydrator screens. Two of the spaces were utilized at the top and bottom for screen enclosures, leaving 16 tray spaces. We like the capacity!
There are various manufacturers and models of these types of racks, so the one you obtain is likely to be different than ours. For that reason, we will give you a construction overview, not specific plans. Don’t worry, this is pretty simple stuff!
You’ll be constructing screened panels for this project, and here is an episode we did that shows you how to do that. You’ll be using off-the-shelf components from your favorite hardware retailer. You’ll use aluminum screen frame material (we like to use 5/16” - which is about 8mm), spline, connector corners, and fiberglass screen material. You’ll need a spline roller, a utility knife, a hacksaw (or fine-toothed saw blade on your miter saw) and scissors are good too.
Here’s the link to our screen construction episode:
You’ll be constructing both exterior screens that will enclose your dehydrator (to keep flies, wasps, bees, and other “visitors” off what is being dried), as well as the interior frames that you’ll dry food products on.
The overall dimensions of our unit (including the wheels) are about 68” tall, 23” wide, and 27” deep (173 cm tall, 58 cm wide, and 69 cm deep).
We have a few enhancements in mind. While the magnet catches hold the door shut okay, a hook and eye arrangement may be better. I think we’ll add a door pull to the door frame too. The wheels that came from the factory are pretty worn and they don’t roll without a bit of resistance. I may build a platform with higher-grade urethane wheels to make it easier to roll.
As far as enclosing the unit, you’ll need to make 5 screen frames that are sized to your unit - top, bottom, both sides, and the back.
Next, you’ll need to construct a door frame. You could do this with wood, but if you want something that is durable and will last as long as the rest of the unit, use aluminum square tubing. Construction is simple - cut the pieces with 45° angles. I use my miter saw to do this (yes - you can cut aluminum - but not ferrous metal - on your power saw!). Make sure the pieces are secured as you slowly cut the material and make sure that both sides are the same length, as well as the paired top and bottom. Then secure the 4 pieces using self-tapping screws and corner angles. Install a straight reinforcement bar somewhere across the middle, and secure it with self-tapping screws and corner angles - two at each end of the bar for a total of four.
We use 3”/76 mm angles because they have two holes on each side of the angle, making for a secure attachment that won’t rotate - everything stays in line during assembly and when completed.
We then attached the door frame to the front of the rolling rack using 4 2-½”/64 mm zinc-coated flat hinges. Each leaf has 3 holes, so each hinge is attached with 6 screws
Once the front door frame is attached to the unit, then apply the front screen to it, once again using self-tapping screws. Be careful not to overdrive them, as the aluminum screen frame stock dimples quite easily.
We’re also contemplating adding a simple solar collector that will sit under the unit and out to the back to create a flow of warm air up through the racks. If we do that, we’ll show you how we did it and will post the link here.
One other caveat. When you are rolling the unit from place to place (perhaps to sunny spots), grasp it with two hands about 2/3rd of the way up from the ground. This will overcome the tendency for the unit to tip if the tires go into a crack or encounter a small rock.
When it comes time to clean the frames, it's easy to do by removing the frames and using a flexible plastic bristle brush to wash them down with soapy water and then rinse. If you’ve dried something with a strong scent (like onions or garlic), you can spritz lemon juice or vinegar on the frames and let them set for a bit. These acids will neutralize the odors and then you wash and rinse the frames as usual. Some people suggest drying potatoes after onions to absorb the scent and take advantage of the flavor. Although we’ve not done that, it sounds clever!
If you’d like a great recipe for simple and delicious apricot fruit leather, this is the recipe we use from Natasha’s Kitchen:
Hey, Dirt Farmer Jay from DirtFarmerJay.com.
We love being able to dry our own fruit and vegetables
using this dehydrator unit.
We built this out of a recycled bakery rack.
Stay tuned and I'll show you how you can make
your own DIY solar dehydrator.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
This solar dehydrator really works well.
When you're living in an area that is warm and breezy,
you can remove a lot of moisture from fruits and vegetables.
This has 16 shelves in it of sizable dehydration capacity
using standard window frame type of material.
Now, if you've never built your own window screens,
you're gonna need to do so for this.
And you can check out the video right above
that shows you how we do it step-by-step
and so that becomes a skill that you possess as well.
We'll also give it to you at the end of this video,
so stick around and you can just watch it at the end
and get that going for you as well.
But what we've done with this rack
is we've repurposed the rack
by covering it with these screens.
Now, without the door, let's just talk about
without the door and we'll get to the door construction
in a moment.
You're going to need five screens to box this in
to keep flies and gnats, your moths and all that out of it.
And once you box this in,
now you've got an area that you can put fruits
and vegetables or items on parchment paper
like these tomatoes that we've got there.
Sometimes things go directly on the screens
like all these grapes that you see here
that we're able to produce these wonderful raisins
right on these screens here.
So, and we have another batch coming as well.
But once you put this in here and create a doorway,
you can seal it and it's going to be beautiful
with lots of air movement
and therefore a lot of wicking away of the moisture
pretty darn quickly.
The whole thing is assembled
using these self-tapping screws,
hex head screws that allow you to use a drill driver.
And that includes putting the screens
on the aluminum frame of the bakery rack,
but also assembling the door frame itself,
the main frame that this screen right here is affixed to.
Now let's talk about building this door.
The door frame itself is constructed of off the shelf
one inch or 25 millimeter channel like this,
or just tube stock, square tube stock aluminum.
Now, the cool thing about aluminum
is you can cut it with a medium tooth blade
on a miter saw or a power saw.
That's right.
We use our power miter saw, 40 tooth blade
and simply feed it through at a moderate rate,
no chopping down hard, make sure it's clamped down
and it'll cut clean.
That is a butt cut and that is actually a 45 degree angle.
This is a piece of leftover stock
from when we constructed this door.
So that what we did is we simply used 45 degree miters
on all the corners to create this rectangle.
And then we used a brace spreader bar in between
to beef up the door.
And then we use corner brackets that allowed us
to have two screws in each side of the bracket.
That way the bracket doesn't pivot,
it keeps everything rigid and that created the door frame.
In addition, we also threw on
some magnetic catches right here.
We threw three of them on.
If you feel that you wanna keep it more secure,
you could certainly put some kind of latch on it,
hook an eye, that sort of thing.
But this allows us then to go ahead and bring it around
and it'll close itself, latch in there like that
and we're just fine.
So that is how the door is made.
It's just a square assembly or squared assembly,
a rectangle that fits to cover all the areas here
and not allow any gaps large enough
to let those pesky flies get into your delicious food.
That's dehydrating.
Hinge installation is equally easy.
So you can see right here that we used hinges
that have three holes on each one,
each side of the leaf here.
We put four hinges down along here
and simply what we did is clamp this in place,
keep it in place and then start with a hinge on the top,
put one on the bottom,
kind of went back and forth to make sure they don't bind.
You can use hinges you want.
These are what they call a loose pin here
where it's been peened in the end here.
It's not like a full door hinge, but use what you've got.
And now it's substantial enough
that it pivots without feeling flimsy.
And this door feels really nice.
So this works really, really well.
So far, what we've dehydrated in it is grapes.
We make our own raisins for our small vineyard,
which you've seen in other episodes of the vineyard.
Tomatoes, because we have just a bumper crop
of tomatoes this year.
So we're dehydrating these tomatoes.
Tomatoes, you need to dry fast.
Get them out on a good sunny day and go from there, okay?
And we've also done fruit leather,
apricot fruit leather that is incredible.
And that dried in about 48 hours, done.
We had a full rack of that.
We're still eating that and enjoying that.
Great way to use up apricots
and for your family to love it.
So this works really well.
What would we do differently or what do we plan to add?
Well, a couple of things.
One, I may end up changing the wheels out on this
and doing something more substantial.
Maybe building a platform like we did
with our roll around storage cart,
which was another one of these carts that was salvaged
to make it easier to roll around a little bit more stable
for rougher surfaces, bigger wheels, okay?
The second thing we're gonna do is add a handle or two here.
You'd be surprised how many times you walk up to this
and you go, which one's the front?
And then the only place you're gonna open
is to kind of grab it on the corner and do that.
So I'm probably gonna go ahead and put a handle here.
I may even put a color indicator on the side
to say what side is the door
just for a little bit of convenience.
The third thing we're considering doing
is doing a solar booster at the bottom.
If we build that, we'll make sure to mention it,
put in a link down below.
And what that is going to be is a channel
that collects solar heat and expels hot air
up into the bottom of this so that air rises through this.
Again, boosting the drying power and shorting the duration
of how long it takes to get finished product.
If you've got a lot to dry, there's a lot of capacity here,
but you wanna move quickly and get it done quickly.
But you don't wanna be dealing with it over days.
You wanna do it day or two.
All right, so if you're gonna build one of these,
you're gonna build a lot of screens.
And if you don't know how, like we promised,
check out this video where we let you know
how to build it step-by-step, the materials,
how to put out a really nice product,
something to be proud of so you can acquire that skill.
And while you're at it, also check out this other video
that YouTube thinks is perfect for your interests
right out of our catalog.
And we'd love it if you'd watch it too.
Hey, until the next time, this is Dirt Farmer Jay
getting ready to dry a bunch of raisins.