Hướng dẫn lập trình Máy rửa tay tự động

Hello everyone and welcome to VT1Spare channel Today we will show you how to make a hand washing machine First, we need an Aero Uno Any kind of mold A HCR04 foam A green net A screwdriver A drill A drill bit Tio Phi 8 About 30cm A screwdriver And a drill bit Next, we will connect the HCR04 to the foam 4 wires We connect the head here And the foam Next, we connect the GND on the foam The foam will connect directly to the GND on the Aero Uno Next, the ECHO will connect directly to the D6 The TRIGGER will connect directly to the D8 And finally, the PNC will connect directly to the 5V So we have finished the connection between the foam and the Aero Uno Next, we will use 2 wires We use a longer wire to connect to the net We use a shorter wire to connect to the foam We use a longer wire to connect to the net We use a shorter wire to connect to the foam We use a shorter wire to connect to the net We use a shorter wire to connect to the foam We use a shorter wire to connect to the net We use a shorter wire to connect to the foam We use a shorter wire to connect to the net We use a shorter wire to connect to the foam We use a shorter wire to connect to the net We use a shorter wire to connect to the foam So we have finished the connection between the foam and the foam