9/30/16 Intro to MSE polymers, polymer structures
Oct 15, 2023
Callister Intro to MSE
polymers, polymer structure, boiling point, melting point, crystallinity, radicals, PVC, PTFE, PP, PE, PS, PMMA, PC, Bakelite, molecular weight, degree of polymerization
There's no office hours for Emily today, but anyway.
Okay, welcome to class, everybody.
Happy Friday.
The weekend is nearly upon us.
Okay, first off, a couple announcements.
First off, I'm going to start like, I'm going to have like a garage sale of stuff that's
left in this class, or I'm just going to start like chucking jackets for right answers, because
pretty soon, like it's getting out of hand.
Somebody else left yet another bottle, so check your around, or come pick up stuff if
you feel like a jacket or water bottle.
Come grab it in my office.
Okay, another quick announcement.
Emily can't do office hours today.
She has a family thing, so to make up for it, she'll do a two-hour session on Monday
from five to seven if you want to take a note.
Okay, a couple brief videos while the seconds before class.
First off, we did the can demo, right, where we dissolve away the metal and leave behind
the polymer, and it was terrifying.
So here it is.
Like, we used really strong acid on accident, and it's just bubbling really strong acid
everywhere.
The fume hood had acid all over the place.
We had to do like a massive cleanup, but it worked, right?
It actually worked.
We dissolved away the polymer, or the metal, and it left behind the polymer, but then the
problem was that we, it's actually extremely thin polymer, and it is really easy to rip
and tear.
And so in our efforts to like get all the acid off, which was everywhere, we actually
tore it to bits.
So we will bring it on Monday, but the lab, we couldn't get to it this morning, so we
will bring it on Monday.
You'll at least see where like there is polymer attached to metal.
It's just not the awesome demo we'd hoped for.
I do want to show two other quick demos starting with class.
I think I mentioned that there's organic electronics.
Here's just an example.
This came out last year sometime.
So it's one of the new LG products where you can see that TV.
He's flexing it.
That entire, they're calling it a wallpaper TV.
It's flexible because it doesn't have, right?
Mine's just boggling.
This should be boggling your mind, right?
Organic electronics.
And it's just the beginning.
We're just going to see cooler and cooler things with the organic electronics.
And then the other one I want to show you, which I think is even more amazing, not this
guy, is this.
Last year, I actually lost my mind in class because this happened right before class when
I came in.
But it's unreal.
These researchers at the Leibniz Institute in Germany came up with a self-healing rubber
and check this out.
It's made of long strand-like molecules tangled and bound together.
A process called vulcanization has long been the standard for curing rubber to make it
durable but still stretchy.
When rubber is pierced or torn, critical chemical bonds break and can't be re-vulcanized,
making a damaged tire useless.
Now, Amit Das and his colleagues at the Leibniz Institute have modified a commercial-grade
tire rubber to avoid the need for vulcanization.
Their carbon and nitrogen additive lets rubber reform crucial bonds.
When torn, their rubber can recover the durability and elasticity that vulcanization gives.
In their experiments, a cut in the rubber healed itself at room temperature, meaning
a punctured tire could fix itself while the car sat in the garage.
A little heat made it heal even faster.
After eight days, the rubber can withstand pressures of more than 750 PSI.
That's about 20 times the normal amount of pressure on a tire.
ACS Headline Science is produced by The American Chemical.
The cost of polymers are tied to the cost of oil because oil is the most common precursor,
petroleum, right?
It's just the way that we get most of our polymers.
So Huntsman Chemical, you know, one of the huge polymer manufacturers right out here
in Utah, when they charge something, it's tied to the cost of oil at that given time.
Because they're organics, they have carbon, it's unsurprising that they're dominantly,
covalently bonded.
And we know that carbon has its four electrons and wants to share with four others.
So carbon would like to make four bonds, okay?
So if we assume that it forms single bonds, then every electron that it has of its four
is going to contribute to one of those single bonds.
It can also form double and triple bonds.
These are not, like, out of bounds.
And we see examples of that.
Say, like, ethylene.
Ethylene is this molecule.
Oops.
So you've got two hydrogens on the end bonded to a carbon.
But this carbon is double bonded to another carbon, which is bonded to two hydrogens.
Right?
So in all, if you count from the carbon, it's got one, two, three, four bonds.
Right?
It's just that it's double sharing with the carbon in the middle.
Right?
You can also have acetylene, like the material they use in welding.
Right?
Acetylene torches.
Now it's a triple bond.
Right?
But in average, like, it's pretty easy to count.
The carbon wants to have four bonds total.
Right?
And so the vast majority of polymers, since they have carbon in them, it's pretty easy
to guess how many bonds they're going to have.
Okay?
If there are only single bonds, then we say it is a saturated polymer.
Have you ever heard of, like, saturated versus unsaturated fats?
A saturated fat is something that has only single bonds.
Saturated fat has some double bonds or triple bonds.
Okay, the paraffin family is maybe the place to start with polymers.
Paraffins are just carbon and hydrogen.
Right?
And paraffin, if you've maybe heard that word before, paraffin is just a wax.
Right?
A paraffin is a wax.
And so when we think of methane, ethane, and propane, we don't think waxes.
But that's because they're the shortest carbon chain members of the paraffin family.
Right?
As you go towards longer and longer carbon chains, so more and more carbons present,
they start to go less like gases, less like liquids, and more like kind of gooey solids
like waxes.
Right?
So in fact, the melting and the boiling point of paraffins, and all polymers really, increases
with chain length.
It's starting to plateau.
Right?
It's plateauing out.
But it increases with chain length.
So the question is, and I want you to turn to your neighbor for this, why on earth should
should melting point and boiling point be correlated to chain length?
So discuss with your neighbors.
Okay, who's got an idea?
Go ahead, Antonio.
So, dispersion forces.
Exactly.
London dispersion forces, just another word for second nature.
Ah, perfect.
Just what we needed in the middle of class.
Okay, what is the London dispersion forces?
It's the same thing as a Van der Waals forces.
And Van der Waals forces are what again?
How does the Van der Waals force come into existence?
It has to do with either a permanent or a temporary dipole.
Right?
We'll say either of those for right now.
Right?
So if you have a polymer chain, like a long chain, it's a paraffin, it's just carbon and
hydrogen.
The backbone is carbon.
It's got hydrogen sticking out the side.
The longer that is, the more likely that you can induce a dipole and then that chain of
like, if these are polymer chains, right?
That now they can interact with one another and be bonded to one another.
So the longer it is, therefore, the more bonding, the more bonding, the higher the melting
or the boiling point.
Okay.
We will.
Okay.
So that's exactly right.
Basically, Van der Waals forces increases with chain length.
Okay?
Now, paraffins and all polymers, really, they don't have to be linear.
There's what's called isomers that exist.
Isomer is just isosamer, means the same unit.
Right?
So you can have something like butane and isobutane.
Okay?
So butane is four.
So it would be carbon, carbon, carbon, carbon.
And all of these things that I'm not going to draw the H's for represent carbon-hydrogen
bonds.
Right?
Those little dashes that represent the carbon-hydrogen bonds.
So you can have that.
That's butane, right?
For like a butane torch.
But you could also have this.
Carbon, carbon, carbon, carbon.
I guess it's got one extra there.
Right?
You could also have that.
Right?
That's isobutane.
Right?
So which one would have the higher boiling point?
Right?
Butane or isobutane.
I think that's actually a quicker question.
Ah, let's skip this one.
Skipping.
But this one.
Would isobutane or butane have a higher boiling point?
A or B?
Which one would have the higher boiling point, A or B?
Okay, answer's in.
Think of which one will have the stronger Van der Waals bonding.
Okay, answer's in.
Quickly.
Are we good to end?
Okay.
Okay, people think butane or isobutane.
What do they think?
It is definitely butane.
So let me call on the individual wearing the Argentine jersey, because I love Argentine
soccer.
Why is it butane?
Why would it have a greater dipole?
I don't know if that's the right, quite right answer.
It has a longer chain than the dipole.
Think of it like this.
Right?
Here's our two chains.
Right?
But this chain has like cancer growing off the side.
Right?
It's got that thing sticking off the side.
So this thing can't get as close.
Right?
Dipole interactions, the closer they are, the stronger they're going to be.
So if you have isobutane, where it's sort of forked, and you've got a side group, that
prevents you from coming as close together, and so it actually weakens the bond.
Right?
So side groups, whether they're whole other chains that go off the side, or if it's just
a different conformation like that, they reduce the boiling point, because it's not as strong
a bonding.
Okay, let's talk about polymer.
Let's see.
So there's lots of different radicals that are possible for structure.
Right?
So we have our main backbone, which is carbon, probably bonded to hydrogen, not necessarily
though.
But then at the ends of these things, oftentimes we have a different what's called functional
group sticking off the end.
It could be methyl.
It could be an ethyl group at the end.
It could be a phenyl group, which is sort of a C6 ring with hydrogen sticking off the
end.
We'll come back to that in a minute.
Okay, polymer molecules.
Oftentimes, polymer molecules, things like you see here, these are way, way bigger than
just the small hydrocarbons that we're thinking of, like ethylene and methane and propane
and butane.
These are like hundreds or thousands of those things put together in big, long chains.
Right?
Covalent interatomic bonds happen along this backbone.
Right?
So if you're using a single bond, consider single bonding for a minute, then you're using
two of your carbon's electrons along the chain.
You're putting one electron forward to the carbon in front of you, one electron backwards
to the one behind you.
But you've got two extra electrons you can do something with.
They oftentimes bond above and bond below.
Right?
Okay?
So the polymer, the word polymer comes from the Greek.
Mer means many, er, means units, and poly means many.
Right?
So many units or many parts, polymer.
Polymer comes then from monomers, which is a single part.
Right?
So you start out with a monomer, and if you polymerize it, you turn monomers into polymers.
So here's some of the hydrocarbon groups we talked about before.
If you want to turn ethylene into ethyl alcohol, you substitute one end group with an, instead
of just ending in a CH2, you end it in an OH group.
Right?
Methanol, alcohol, propanol, they all have this OH group on the end.
They're all alcohols.
Right?
And so forth with aldehydes, alkynes, amides, and so forth.
I'm not going to expect you to know these.
If you take O chem, you'll learn a whole lot more about them.
There are also things like aromatic groups.
Aromatic groups are things that have a C6 ring inside of them.
Right?
So take phenyl.
Right?
A phenyl group has this.
So this is bonded to the chain.
Right?
Our rest of our chain is maybe up here.
But these are all just carbon bonded to hydrogens.
Anytime you see lines coming together, you can just recognize that that's a carbon atom there.
Short term for this is we just don't write the atom, the carbon there, but recognize
there's one there.
But if you look at this, it's only got three bonds.
Right?
One, two, three bonds.
Right?
So there's a problem.
So we know there must be double bonds.
So when we talk about methane, when we talked about it earlier, there are actually double
bonds.
But this structure is resonant with this structure, where if we do the double bonds over there.
Right?
So they're actually alternating.
Or rather, the double bond is shared between multiple sites.
Okay?
So how do we go from monomer to polymer?
This is maybe the more interesting part of the lecture today.
Let's say you start out with ethylene.
Right?
This molecule is ethylene.
Right?
How do you turn that into polyethylene?
Polyethylene is which one?
Polyethylene.
The most common plastic.
Right?
Plastic, polymer, same thing.
Well, same word, basically.
It means the same thing in this class.
This, you get this from that, but that's a gas molecule, that ethylene molecule.
This is clearly a solid.
It's a pretty hard solid.
Right?
So how do you go from there to here?
You have to polymerize it.
Polymerizing means you have to go, well, look what's different.
And this is polyethylene, this big long chain that would keep on going.
It has single bonds between the carbons.
Right?
Whereas this ethylene has a double bond.
So what we have to do is we have to introduce something that's going to break that double bond.
Right?
And then it's going to do the following.
So let's say we put in something like bromine, Br2, which will disassociate into 2Br.
They draw a little dot.
That means it's a radical.
Right?
So this bromine free radical is now able to go in and attack that double bond and break it.
So now you have, you've got bromine bonded to carbon, which is bonded to 2 hydrogens.
You've got this like that.
Right?
We just did that by splitting it.
But now count the bonds.
You've got 1, 2, 3, 4 bonds for this carbon.
It's happy.
But this one's only got 1, 2, 3.
So it technically has this leftover electron.
And now it's a free radical.
Right?
So this thing finds another ethylene molecule.
What's happening?
Am I not plugged in all the way?
Am I bumping it?
This is one of many different types.
This is one of the most common ones.
Right?
You add what's called an initiator.
The initiator creates a free radical such as bromine.
That attacks a monomer and breaks a double bond commonly.
That double bond, since it's not there, you now have a leftover free electron that can attack another one.
And so this just keeps on going until you run out of new ethylene molecules for this to attack.
Or here's the other thing that can go wrong.
If another bromine molecule, free radical, comes over here, it could cap this thing.
So now you've got a long chain of polyethylene capped with bromine groups on the end.
Right?
And that would terminate this.
It's now no longer free to keep polymerizing.
That'll come in.
That'll be important later.
We used boron.
That was slightly different.
That was cross-linking.
Cross-linking is not quite the same as polymerization.
I know some similar elements to them.
We'll get to cross-linking later today, I hope.
You don't.
You could substitute it when you're all done.
And there are a lot of…
So if you guys take organic chemistry, I know that material science has to take at least one semester.
I don't think mechanicals do, though.
Oh, so there's reactions.
Basically, you pick something that wants to be there more than the bromine so it displaces it.
So there's a series of reactions that are possible.
We're definitely not going to cover them in this class.
That's another thing.
Let's say you add a tiny amount of the initiator.
If you add a very little amount, then there's very few chains being formed.
And if you let these things polymerize all the way to completion, you have a small number of incredibly long chains.
Yeah, that's another thing.
And we'll come back to that, actually.
So we keep on drawing this polymer like a straight line, but it is, in fact, not a straight line.
And it is not this.
And that's a fine way to do it when we're talking about it, right?
But in actuality, we know that bonds, electrons, don't like to overlap with one another.
They like to be separated.
Carbon has four.
And I think the other day we mentioned that the best way to separate four things around a sphere is a tetrahedron, right?
So if these are like my four things, we do three below and one above, right?
Can I see this?
These four are as far away from each other as pretty much they can get, right?
The tetrahedral shape.
So what's the angle between this thing and this, right?
It's 109.5 degrees, right?
So that number is going to be important in this chapter.
Right?
So in actuality, we draw it as a zigzag like this.
It's a more common way to draw the structure.
And you recognize that this is 109.5 degrees, right?
Another way to do it is to draw the carbon with those two in plane, this one coming out and this one going into the board.
Right?
Those are hydrogens.
The upper one, the left one, would be in plane.
But then that means this hydrogen must be coming out and down.
The other one must be going out and back.
I'm sorry, back and down.
Excuse me.
Okay.
Let's talk about the first rundown of some of these polymers, the most important ones anyways.
These are the ones I expect you to know sort of for an exam.
Polyethylene.
Polyethylene is the most common plastic.
It is used for almost everything, right?
Packaging, bottles, toys, all sorts of things.
It's the most commonly used plastic.
It has this repeat unit.
It has carbon bonded to carbon, bonded to hydrogen, bonded to hydrogen, bonded to hydrogen.
It is the simplest polymer that we can talk about.
We've already showed its structure a few times, right?
Polyethylene.
So this right here is what's called the repeat or mer unit.
Technically you can even take one of those, but the convention is to take two carbons.
That's the repeat unit.
So if your chain is some huge number of them long, it's going to be in integers of these things.
We'll come back to that later.
Now there's lots of different flavors, right?
Flavor is the right word, of polyethylene.
There's LDPE, HDPE.
In fact, if you've got a bottle that's plastic or a calculator or something that's made out of PE,
if you look at it, it will oftentimes say HDPE, LDPE.
Maybe you've seen this before.
Or if you've seen the recycle number, right?
The recycle number will have a number between 1 and 9.
That corresponds to which type of plastic it is because when you look at this, like I'm pretty sure that this is Teflon,
but without testing it, I am not even sure.
And a layperson has no idea what this is.
I actually have no idea what this is.
It's probably polyethylene because it's really light, but I don't know.
They put numbers on things to help us know how to recycle them better
because there's lots of different plastics and you don't want to mix them usually.
Next one is polytetrafluoroethylene, PTFE.
This is Teflon.
It's also known as a fluorocarbon.
This one's definitely PTFE.
I'm almost positive this is because it's slippery and it's white.
Fluoropolymers or fluorocarbons are incredibly important because they don't stick.
They're hydrophobic, water beads up on them.
They have extremely low coefficient of friction, the third lowest of any solid.
They're unreactive because basically it's carbon bonded to fluorine.
That fluorine and carbon makes a very strong bond and it can't be bothered with anything else.
You put it in the presence of acid that has these oxidizing radicals, it doesn't care.
It's happy.
So it's a very good polymer for chemical inertness.
They use it for lubricants.
They use it for all sorts of things.
And one thing I think is interesting, it is the only substance on the planet that a gecko cannot stick to,
so we have to watch the video, obviously.
Not happening.
Not today, gecko.
That's amazing.
However, the benefit of being chemically inert can also lead to some downsides.
So you've got a chain.
You've got some long chain.
Imagine these are all just carbons bonded to fluorines.
It is inert.
You cannot attack this with regular acids and things.
Well, the problem is if this is a chain and this is another chain of Teflon, well, we can't make these things stick to each other.
Right?
They have some Van der Waals bonding, but oftentimes we like to augment Van der Waals bonding by bonding them together.
Just like Legos, right?
We stick them together.
That's called crosslinking.
That's what Alex mentioned earlier.
When we added the borax to the glue, we were crosslinking it.
We were making these strands stick to each other.
But these are so inert that it's hard to crosslink them with anything.
And so because of that, you don't really form very, very strong bonds between these things.
And so they're actually prone to sliding past one another, especially under sustained load.
Sustained load and the plastic deformation that results from it is exactly what we've already talked about.
That's creep.
Right?
Teflon is actually very susceptible to creep because these chains, they don't bond with one another.
Kyle, why is the melting point so high?
Good question.
Why is the melting point so high?
So they have Van der Waals bonding, right?
These things, they're very, like fluorine is a very electronegative atom, right?
So it wants to pull those bonds very strongly.
So there is a dipole present on this thing, which can be an induced dipole.
So these things can form strong Van der Waals bonds.
But a Van der Waals bond is drastically weaker than a covalent bond.
So when this actually breaks down, the reason why you can't use Teflon in, like, a fire, like to hop on a pan or something,
is because you will eventually break the covalent bonds along the chain, right?
Between the carbon and the fluorine.
I don't know which one breaks first, right?
If that happens, then you're out of luck.
Okay?
That's Teflon.
They use it for gaskets.
You guys have probably used it.
Teflon tape, right?
If you've got a seam or a gasket, we like to put Teflon in there.
But it's actually not great if it's going to be under a sustained load for a very long time because it will creep.
And creep will eventually blow out your gasket, right?
So it might, and in many instances, it is better to use rubbers, right?
Oh, we'll get to rubbers later.
Okay, PVC, polyvinyl chloride.
So if you start out with polyethylene, right, which was carbon bonded with hydrogen all around it,
you take out one of the hydrogens and put in a chlorine ion, you've got PVC, polyvinyl chloride,
which is used for all sorts of things.
This one I think we mentioned the other day that, like, it's pretty remarkable.
It wasn't invented until the 70s, which blows my mind because this is everywhere.
PVC pipes, you all have this in your garage.
You have it in your homes.
It's everywhere.
PVC is innocuous, right?
There's different, just like there's different flavors of polyethylene, LDPE, HTP,
we'll talk about what those mean later.
There's different flavors, if you will, of polyvinyl chloride.
You can add additives that make it rigid or make it not rigid, right?
So you can have pleather pants, right, PVC pants, should the whim strike you.
Or you can have very rigid pipes, right?
Both are possible.
It just depends on the additives you add to it.
This has pretty crummy thermal resistance, right?
PTFE is good, too.
I should know the number.
Three or 400, I think.
It's good to relatively high temperatures.
Polyvinyl chloride, 120 degrees C.
So boiling water is 100, right?
So we're getting pretty close to where it's going to be decomposing, just boiling water.
So that's going to be important for applications, right?
Because before it decomposes, it's probably going to soften, and it's going to change
its mechanical properties, okay?
Next one.
And so polyvinyl chloride is the third most used polymer.
So polyethylene is number one.
Number three is polyvinyl chloride.
Number two is polypropylene.
Polypropylene, you start out with polyethylene, and you replace one of the hydrogens with
a methane, right?
With a methyl group, right?
The CH3, right?
So these are, again, they're not drawn, but it's just understood that these would be hydrogens.
So you've got hydrogens bonded on three of the sites, and one of the groups is a methyl
site, CH3, right?
So a CH3 is bigger than just a hydrogen, right?
A chlorine is bigger than just a hydrogen.
That'll be important in a few minutes.
This is pretty rugged.
It's chemically inert.
They use it in packaging and textiles.
They actually make ropes and carpet regularly out of their clothing, right?
They make all sorts of things out of polypropylene.
The chain itself can be degraded by UV light.
UV light or heat can cause these bonds to break.
And once it breaks, right?
Imagine if this thing breaks, you've got a chain, right?
If something causes that to break, now you've got free radical, free radical.
That's a bad thing.
Then it can go on and attack the polymer elsewhere.
So that's not a great thing.
So they put things in polypropylene and many other polymers to intentionally absorb UV
light so that the UV light doesn't get absorbed by breaking polymer chains, right?
So they add things like carbon black, like rubber tires.
Why are rubber tires black?
Because they're full of asphaltenes, black things that basically absorb light.
It's a cheap filler, and it also blocks UV light.
It absorbs UV light so that light doesn't mess with the crosslinking that you've put
into it.
Okay, there's polystyrene.
Polystyrene, again, start with polyethylene.
But instead of swapping it for what we talked about before, now we're going to put in a
phenyl group, right?
Phenyl's the right word there, right?
It is a phenyl group, right?
Jimmy?
I get the Jimmy approval?
I think that's the right word.
I'm pretty sure.
Right?
So this is a much larger side group sticking off the side, right?
Polystyrene, if you make it dense, it is hard, clear, and brittle.
Now, polystyrene, this is also styrofoam, right?
So you don't think of styrofoam as being hard, clear, or brittle, and it's not.
How they make styrofoam, this is actually pretty interesting.
They'll take styrofoam, and they start out with polystyrene little beads that have some
organic molecule that can dissolve, pentane, right?
They heat it up to 200 C in the presence of steam, and in that steam, sort of very high
temperature, steam-filled environment, the pentane can escape, and then steam and air
can go into it, and it expands by 40 times the volume.
So these little tiny beads grow into, if you've ever taken styrofoam, like in an Amazon box
you got or something like these things, it's made of a bunch of small little beads, right?
You can see them, they're like a corn kernel, they're stuck together.
They then take those little individual corn kernels, and they make giant bricks out of them
by just pressing it, basically, right?
So that's polystyrene.
It's actually flammable.
Now, how about this?
Even though it's flammable, you can take and you can boil an egg in a styrofoam cup by
placing the egg in a cup that's filled with water.
I haven't used this link in a while.
Maybe it's still up.
So you can boil water in this, but we just said polystyrene is flammable.
So what's happening here?
Yeah, basically, it's polystyrene, so it's expanded styrofoam, so it's porous.
It's a bunch of these little beads stuck together.
So water can actually diffuse through that pretty easily, and when it diffuses through
it gets to the surface, where now you've got the fire, and basically it's evaporating,
and as it evaporates, it's cooling the surface below it, right?
It's constantly cooling it.
So once you evaporate all the water, yeah, you betcha it's going to burn, right?
But it's very permeable to moisture.
It's the key feature there, right?
It is not biodegradable.
We use a ton of this, and it's not biodegradable, which is why I think companies like Amazon
use it less and less than these other recyclable polytech...
I think they're actually PTFE packets of air, right?
Other things to provide packaging.
There's PMMA.
This one's harder.
I wasn't expecting to know this structure.
Polymethyl methacrylate is also called acrylic.
If you've ever heard people talk about acrylic glass, it's not a glass, it's a polymer, and
it's a polymer that they use to replace glass because it's lightweight, it's low temperature,
like you can melt it and cast it at very low temperatures relative to glass.
It's more shatter-resistant than glass, and it's, you know, polycarbonate's an even better
shatter-resistant polymer for glass, but it has some other benefits relative to polycarbonate.
Next up is Bakelite.
I've mentioned this a couple times in the semester, but Bakelite is the plastic in your
grandma's house.
If you see, like, old phones, old cheap jewelry, right?
This is Bakelite.
You might even think it's a ceramic looking at it because it's really hard, right?
This is our first polymer that we're talking about that is not a thermoplastic but is a
thermal set.
We'll talk about what that means in a moment.
This is also a 3D one.
Most of the polymers we've done now have been long chains.
This one's not chains.
It's a 3D network.
This is how it works.
The structure looks like this.
So there's a sort of benzene ring to start with.
When they draw the circle in it, that just means that it has the double bonds.
That's shorthand for where the double bonds are.
And then you've got hydrogen sticking out here.
But here you've got a CH2 bonded to something.
CH2 with another bond to something.
And this one is CH2 bonded to something.
So these can all connect to other of those repeat mers, I guess you'd call them, right?
And because there's three directions, not just two, you can have more than just a line.
You can have a three-dimensional network structure, right?
Because it's a three-dimensional network structure, this is a pretty hard, strong polymer because
it's covalently bonded in all dimensions.
Plastics, you know, they're van der Waals bonded between the chains.
And so they're not very strong.
They melt at pretty low temperatures.
This thing will not melt because you can't just overcome van der Waals forces.
You have to break covalent bonds.
And once you give it enough heat to break a covalent bond, it typically is catching on fire
because that releases a lot of energy and it keeps on burning, right?
So this will not remelt.
Most of the plastics we talk about now, polystyrene, you know, right?
If you get it hot enough, it'll melt.
Polyethylene, polypropylene, polyvalent chloride, these things melt.
This one will not melt.
It will burn, right?
So it's toast, right?
That's the difference between a thermoplastic and a thermoset.
We'll come back to that in a second.
Okay, nylon 6-6 is this polymer.
Nylon 6-6, long name, polyhexamethylene adipamide, right?
They call it nylon 6-6 because you've got carbon, carbon, carbon, carbon, carbon, carbon,
1, 2, 3, 4, 5, 6 carbons.
And then over here you've got carbon, carbon, carbon, 6 more, right?
So it's just shorthand.
Nylon, the name where nylon comes from is actually not totally known.
There's a, I think, racist reason for what it probably means, and I'm not going to say it,
but that's according to Wikipedia.
I think it had racist origins, the name nylon.
Regardless, it's a very commonly used material.
Nylon is these things.
These are both nylon.
It's a very tough, strong plastic.
It's pretty hard and brittle sounding, right?
They use it for zip ties, ropes.
You can actually see how they make this.
This is the first example where you can have a copolymerization where there's not just one mer,
but there's multiple mer units that come together to form it.
So one of these years I'm going to do this in class.
I've not done it yet.
But basically nylon 6 is nylon 6-10, very similar.
To make it, you pour in two monomers.
And they actually face separately because one is denser than the other.
So you see two layers of liquid there.
One is one monomer.
You've got the other one.
Right?
So here's the structure.
It's made of two monomers.
This one is made of three, right?
So what happens is when you pour these two together,
you get copolymerization at that interface, right?
And if you grab that and start drawing it out,
now they can keep on mixing.
That interface keeps on growing.
So you can actually just put it in a glass jar and twist it.
And this is called drawing.
It's so fun.
This is just a very easy way to make it.
One of the years we'll do it.
It's kind of gross looking.
And it just gets grosser and grosser.
Right?
So that's nylon 6-6.
Obviously, once you take it out,
you saw that that was like a nice continuous fiber.
So what this is, once you've created the nylon,
then they melt it and you draw on it.
One size fits all.
There's PBT.
You've probably heard of PBT.
PBT has been in the news in the last five to ten years,
and it's been much more online.
PBT is a very hard-boiled glass of these.
I'm pretty sure that this is made with a different label.
I haven't checked it,
but I would wager that this is PBT, I guess.
It's very hard.
The technology model is made out of this.
It's so hard and brittle that it's not very easily processable,
that they add what's called a plasticizer.
They add something to this to make it a little less stringent,
so it's easier to form into shapes and stuff.
And that's why it's in the news.
That plasticizer, they think,
when you touch it with your teeth,
that it's leaking out.
Right?
Because you put your microwave burrito in there,
and that plasticizer,
they're afraid that it's leaking out into your burrito
and getting ingested into that plasticizer.
So, anyways.
Why is it so hard?
Well, this is different.
Look at it.
You've got an oxygen in here,
and also a carbon, right?
You've got oxygen right there.
And then you've got this whole aromatic ring
as part of the backbone, right?
So that's going to greatly increase the strength of the ketone,
because it's a really strong carbon.
It has several of these aromatic rings in the backbone,
which makes it very, very strong.
There's polycarbonate.
Polycarbonate.
Again, it's a very strong polymer.
Very shatter-resistant.
It's got two of these aromatic rings along there.
Right?
This is what they made...
Well, if CDs existed anymore,
it's what they made CDs out of.
Right?
It's very tough.
They make bulletproof glass out of this,
because it's very transparent.
Better than glass, actually.
But it's very, very shatter-resistant,
because it's not a brittle material.
Right?
But it has very low scratch resistance.
So if you made CDs,
this was like the bane of me in eighth grade,
was all my CDs were scratched.
They actually started with polycarbonate,
and then they had to coat it with a much harder polymer.
Right?
And I'm forgetting what they used for that.
It's something.
Okay.
Those are the important polymers.
There's many other ones that are important.
We didn't even talk about delrin.
Delrin's a...
You'll probably use it if you are mechanical engineers.
It's a commonly used one,
because you can machine it really easily.
So there's other ones.
We definitely did not cover all the polymers.
There are way, way more.
This is, I think, a flavor,
and a good enough for one for this class for now.
Let's shift gears and talk about molecular weight.
So molecular weight is just a measure
of how long these chains are.
Right?
Most polymers are chains.
So how long is the chain?
The molecular weight gives you a measure of that.
So we have amount of polymer written here.
I'm going to get rid of that and write number of strands.
Right?
Number of strands is, I think, a better way.
Number of strands.
You can have different molecular weights
if you plot number of strands versus the molecular weight.
Right?
If you have...
So this is experimental data.
You can actually measure a line like this.
And we won't get into tools that can measure that,
but they're out there.
Right?
And it says that's the number of strands
as a function of molecular weight.
So there's number average molecular weight, Mn,
number average.
And there's Mw, which is weight average.
So the number average is basically
if you took the total number of strands
and the number of strands somewhere in the middle.
Right?
There's 1,000 strands.
You can figure out what's the average molecular weight
just out of those 1,000 strands.
Right?
So that's going to be this one, Mn.
And then there's weight average.
Weight average is going to be shifted off
to the right of this peak.
Right?
Why is it shifted to the right?
Because the strands over here,
even though there's way fewer of them,
they weigh a lot more.
Fewer, but way more.
Their molecular weight is much, much higher.
Right?
Because they're like maybe 10,000.
These things get to crazy numbers.
Right?
So the weight average will be shifted.
These won't be the same number exactly.
So how do they calculate this?
They generally, you'll see something like this.
You'll see a table that says fraction.
And this will be either fraction by weight
or fraction by number.
And then it'll give you a range,
like molecular weight range.
Right?
So they might say like 10 weight percent
goes between 0 and 1,000 grams per mole.
Right?
And then they'll say,
and then you've got another 30 percent by weight
that goes between, you know,
1,000 and 10,000.
Right?
And maybe the last like 60 percent
is above that,
greater than 10,000,
maybe up to like 100,000.
So how do you determine the number average molecular weight
and the weight average molecular weight?
Well, you'd have to have a table like this.
From this table,
we're given the weight fraction.
Right?
So weight fraction is going to be WI.
Right?
That's WI or weight fraction.
And then you need MI.
MI is the mass of the polymer in that range.
Right?
So in this case,
we're going to take the average.
You'd say 500.
Here you'd say whatever the average is there
and the average here.
Right?
And you'd basically just add them up.
You'd say,
all right,
0.1.
So in this case,
we'd say 0.1 times the average.
So in this case,
500 plus it'd be 0.3 times the average there.
What is that?
5,500?
I think.
Anyway,
and so forth.
Right?
You keep on doing that.
Now,
if you wanted to calculate the number average,
I would've had to give you another column in this table
which says the number of strains.
Right?
The number fraction.
Okay?
But it's pretty straightforward.
You just add these things up
based off some average value.
If you want it to be more accurate,
then you find a way to measure molecular weight
within smaller and smaller windows.
As it approaches smaller and smaller numbers,
this gets more accurate.
Because this is a very bulky histogram right now.
The more narrow you make it,
the more accurate it is.
Density comes in later.
We'll get to density in a minute.
It has to do with crystallinity.
We'll come back to that.
So there's a couple examples in the book
that I'm gonna have you do for the homework next week,
I guess after the exam.
I suppose I'll assign it this Wednesday,
but it won't be due until,
you know,
I guess not the week,
not the Wednesday after the exam,
but probably two Wednesdays after.
I'll double check.
Anyways, you'll have a chance to do this.
Three Wednesdays after.
You're right.
Fall break's coming.
Anyways, you'll get a chance to see this.
I'll make sure you have at least a week to work on it.
Next off, and maybe more importantly,
is the concept of degree of polymerization.
N sub N or N sub W.
Where again, degree of polymerization
can be either calculated based off of the number average
or the weight average.
So if it's based off the number average,
then you take the molecular weight
based off of the number average
and divide it by M bar, right?
So M bar,
first off, this is M with a hat, right?
That's this one we calculated up here, right?
Same thing, right?
And then small M bar,
that's the mass of each individual repeat unit.
So in polyethylene,
remember that's two carbons bonded to four hydrogens.
So you just figure out the mass of two carbons
plus four hydrogens, right?
And it's 28, right?
It'd be 28.
And so if you take the total weight average
and divide it by that,
then you get the degree of polymerization
based on weight
or you get the degree of polymerization
based off the number if you divide it.
Okay?
Now, what if you have more than one mer in the structure,
like nylon 6-6, right?
Nylon 6-6,
you could do it two ways.
First off, if you know that you always have
one of these right next to one of those,
then just treat the whole thing as one mer.
If you don't have equal amounts,
maybe you have two-thirds of this one
and one-third of that one,
then you need to multiply by the fraction of those, right?
So we'll do an example of that in a quick moment.
Okay, so we have 10 minutes left.
I didn't think we'd get this far.
Are there questions?
Am I going too fast?
What questions are there?
It's coming.
Patience.
It's coming.
Are there questions on polymers so far
that I've gone too quickly through?
Yeah, Chris?
PTFE's interesting.
It does not melt, really.
When they make it,
when they make this,
how do they make it?
It doesn't melt
and you can't cast it into this
whatever spindle sort of shape thing.
Instead, they do powder processing.
They have found ways to kind of make it melt now,
but they do what's called powder processing.
So I'm a big ceramics fan.
In ceramics,
these things don't melt until like bonkers temperatures.
So how do you make ceramic components?
You have to start with ground up little particles of ceramics
and you pack them together into some sort of shape
and then you do what's called sintering.
And sintering is the process
whereby these individual particles
sort of diffuse into one another
and you'd like them to diffuse completely
and get all the void space out.
You don't usually ever get all of it out.
There's always a little bit left over.
Same thing with this.
They actually take little particles of it
and they sinter it together under like pressure.
They sort of press on it and apply heat.
That's how they make a lot of PTFE.
I think nowadays they actually have additives to it
that can locally make it kind of a little more soluble
and easy to process.
But I don't know for sure about that.
We teach a great class on polymer in our department.
Dimitri teaches an awesome class on it.
So if you're interested,
it's one of the favorites, I think.
Yeah? Is that a fair statement?
I think it's a department favorite.
Maybe not.
I think it is.
Yeah? I think it's good.
So maybe we'll keep going then.
Any other questions?
Yeah, Paul?
Okay, so if this is number of strands, right,
then you have some average number of strands, right?
In this case, we're assuming like the area,
like maybe the amount of polymers
is a better way to put this, right?
Maybe that is a fair way to put it.
Then you've got some average number of strands
at some weight, right?
Okay?
So if you have 1,000 strands
and you count up that there are 13 strands
that are X long,
and you have 100 that are this long,
you could just take up, out of those 1,000 strands,
what's the average number length?
Okay?
And then there's molecular weight,
which takes into account that the longer strands,
even though there might be very few of them,
they could be incredibly heavy.
And so it skews your molecular weight to the right.
Yeah?
I think it would be more valuable, the number average,
but it's harder to measure.
It's way easier to determine the weight fraction.
Like we haven't even talked about the tools
that we use to measure this,
but determining them by number,
like how would you do that?
You have to be able to look at it and count them somehow.
These things are so small, that's not realistic.
So how they actually measure it,
I'm drawing a blank how they do it,
but I know how they do it with weight average,
and it's much easier to do.
So I think,
is there a way to convert between the two?
I don't think so,
but I better not give you a concrete answer now.
I better look that up.
Maybe not, but I better not.
Tyler?
So you're looking at the amount of polymer
versus the molecular weight
of that individual type of polymer, right?
So basically you'd say,
you did the polymerization, right?
You added the bromine,
and each one of the little bromines
started attacking ethylenes,
and some of those were able to go and get crazy long,
but not very many.
So you have some of them,
some amount over here,
they got crazy long.
And yet some of them,
it didn't get very long at all,
but most of them are somewhere in between, right?
So that's what this plot is showing.
It's just saying amount of polymer
at some individual molecular weight.
So it's saying that if you looked inside a microscope
and you could somehow see these chains,
you'd have some of these little short ones,
you'd have a lot in the intermediate range,
and maybe one or two that's crazy long.
This plot is just a way of showing that, right?
It's just a distribution based off of molecular weight
of your whole sample.
If you could take an average of what's there,
since we know that there's not technically one average,
there's not like there's one chain length everywhere.
It'd be nice if there was,
if it was just like everything was one chain length,
that'd be great.
But in reality, we end up with a distribution,
and so we need to talk about that distribution,
and there's two ways that we can do it.
We can assign an average based off of weight or number.
Technically, it'd be nice to have standard deviations too,
but I don't know if I ever see that reported.
Alex and Danny.
Okay.
We'll come back to density.
The problem with density
is that these things aren't totally crystalline.
If they crystallized perfectly, you could use density,
but they don't.
They have regions that are crystalline
and regions that are definitely not crystalline,
or some of them are not crystalline at all.
So we'll come back to that next class.
So Danny, another question?
Yeah, so like you've got like 1,000 strands,
and on average, you figured out what's the average length,
what's the molecular weight of that?
Correct, rather than total weight
of the fraction of your component, right?
Let's end here and pick up here next time.
Enjoy your weekend.
What's that?
Stop this.

