GaAs, Polymers || MODULE 4 || EC 465 || KTU MEMS || LECTURE 27
FOR FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#ktumems #ktu
Hi all, today we are discussing the introduction of gallium arsenide and polymers.
First, let us see what gallium arsenide is.
We have learned that silicon is used for the fabrication of silicon membranes.
Similarly, we have learned that germanium is used as a semiconductor device.
Commonly, silicon, germanium and gallium arsenide are used.
What is special about gallium arsenide?
Gallium arsenide is a compound semiconductor.
Because it is a compound of gallium and arsenide.
So, what is gallium arsenide?
It is a compound semiconductor.
Because it is made of equal numbers of gallium and arsenic atoms.
So, it is a compound.
And it is more complicated in lattice structure.
With atoms of both constituents.
And hence, it is more difficult to process than silicon.
However, gallium arsenide is an excellent material for monolithic integration of electronic and photonic devices on a single substrate.
Gallium arsenide is monolithic.
Mono means single.
Lithos means stone.
So, it is a single stone.
It is an IC fabrication using only one component.
There are two types.
Monolithic ICs and hybrid ICs.
In hybrid, we use different materials.
Gallium arsenide is an excellent material for monolithic integration of electronic and photonic devices on a single substrate.
Gallium arsenide is a prime candidate material for photonic devices.
Because it has high mobility of electrons in comparison with other semiconductor materials.
What is there in gallium arsenide?
It has high mobility.
The mobility of gallium arsenide is 7 times that of silicon.
What is high electron mobility?
It is easier for electric current to flow in the material.
So, gallium arsenide being a material with high mobility of electrons, thus can better facilitate electric current flow when it is energized by photon sources.
Next point, gallium arsenide is also a super thermal insulator.
It provides excellent dimensional stability even in high temperature.
One negative aspect of gallium arsenide is its low yield strength.
Its yield strength at 2700 MPa is only 1 third that of silicon.
So, gallium arsenide is not widely used in microsystems.
So, gallium arsenide is more expensive than silicon.
Next, let us look at polymers.
Polymers include such diverse materials as plastics, adhesives, plexiglass, and lucite have become increasingly popular materials for MEMS and microsystems.
For example, plastic cards approximately 150 mm wide containing over 1000 microchannels have been adopted in microfluidic tetraphoretic systems by biomedical industry.
Esposy resins and adhesive resins such as silicon rubber are customarily used in MEMS and microsystem packaging.
Polymers include such diverse materials as plastics, adhesives, plexiglass, and lucite have become increasingly popular materials for MEMS and microsystems.
Esposy resins and adhesive resins such as silicon rubber are customarily used in MEMS and microsystem packaging.
Polymer material is made up of long-chain organic molecules.
The combined molecules can be a few hundred nanometers long.
Low mechanical strength, low melting point, poor electrical conductivity, and poor electrical conductivity are the main characteristics of polymers.
Thermoplastics and thermosets are two groups of polymers that are commonly used in industrial products.
Thermoplastics can be easily formed into the desired shape for specific products, whereas thermosets have better mechanical strength,
temperature resistance up to 3500 degrees Celsius.
Polymers as industrial materials
Traditionally, polymers have been used as insulators, sheathing, capacitor films in electric devices, and die pads in integrated circuits.
A special form of polymer, the plastic, has been widely used for machine and device components.
The main advantages of polymers as industrial materials
Lightweight, ease in processing, low cost of raw material and process for producing polymers, high corrosion resistance, high electrical resistance, high flexibility in stretches, high dimensional stability.
These are the advantages of polymers.
Because of these advantages, we are using polymers as industrial materials.
The main advantages of polymers as industrial materials
The unique feature of polymers is their variety of molecular stretches.
This unique feature has offered scientists and engineers great flexibility in developing organic alloys by mixing various ingredients to produce polymers that satisfy specific applications.
Polymers for MEMS and Microsystems
Polymers are very important for MEMS and Microsystems.
Photoresist polymers are used to produce mask for creating desired patterns on substrate by photolithography.
The same photoresist polymers are used to produce the prime mould with desired geometry of MEMS components in LIGA process for manufacturing micro device components.
These prime moulds are plated with metals such as nickel for subsequent ingestion moulding for mass production of micro components.
Conductive polymers are used as organic substrates for MEMS and Microsystems.
Ferroelectric polymers behave like piezoelectric crystals and can be used as a source of attenuation in micro devices such as those for micro pumping.
The thin LB films can be used to produce multi-layer microstructures similar to micromachining techniques.
Polymers with unique characteristics are used as coating substances for capillary tubes to facilitate electro-osmotic flow in microfluidics.
Thin polymer films are used as electric insulators in micro devices and as dielectric substances in micro capacitors.
Polymers are widely used in electromagnetic interference and radio frequency interference, shielding in microsystems.
Polymers are ideal material for encapsulation of microsensors and packaging of other microsystems.
These are some applications of our polymer.
Due to these wide applications, polymers have become increasingly important materials for MEMS and Microsystems.
Thanks for watching.

