How to Install AMP Research Bed X-Tender 2007 GMC Truck Motorz #11) #GJWhighonlife #GJWtechnology

Chris Duke
3 followers
Chris shows you how to install the AMP Research Bed X-Tender on a 2007 GMC pickup truck which gives your pickup's bed an extra two feet to haul all your stuff.
BUY: https://amzn.to/3GzW9oK
Show notes: http://www.motorz.tv/blog/1100/gmc-truck-amp-research-bed-x-tender-installation/
FOLLOW CHRIS:
https://www.instagram.com/chrisduketv/
https://twitter.com/chrisduketv/
https://chrisduke.tv
FOLLOW MOTORZ:
https://www.motorz.tv/
https://www.instagram.com/motorz/
CHRIS' RECOMMENDED TOOLS:
Products on Amazon: https://chrisduke.tv/amazon
Royalty-free music: https://chrisduke.tv/epidemic
Manage your videos: https://chrisduke.tv/tubebuddy
#GJWhighonlife #GJWtechnology #GJWtram #GJWadvanceautoparts
I'm Chris Duke, and this is Motorz.
Over a decade ago, a man by the name of Horst Leitner drew a concept of a new product for
pickup trucks on the back of a paper napkin.
His invention was the result of losing too much gear out of the bed of his pickup truck
while hauling his motorcycle.
That invention later became the bed extender, which has been sold over two and a half million
times through OEs and aftermarket retailers.
It has become as common an aftermarket accessory as a bed cover.
Today on Motorz, I'm going to show you how to install one of these on a 2007 GMC pickup
truck.
Now, let's take a look at everything that comes in the box.
Of course, we've got the tubes here, these uprights, the straps, these end caps for the
tubes, and a universal mounting bracket.
Now, Amp Research supplied us this quick latch, which is going to allow us to take the bed
extender off at any angle.
In order to mount these, we have to use the template also provided by Amp Research.
For this installation, you're going to need a rubber mallet, a Phillips screwdriver, a
Torx T20 bit, a center punch, a tape measure, a hammer, a power drill, and a 964 drill bit.
Tape the template that you just cut out to the D pillar of the bed of your truck, and
then use a center punch to mark your holes.
Using a 964 drill bit, drill through the sheet metal.
Attach these quick latches to the truck using the supplied Phillips head screws.
Slide the three bent tubes into the pivot upright with the drilled tube in the center.
Secure it with the provided screw.
Slide this strap latch over the outside tube with this plastic insert that's on here facing
up, and then attach this bumper upright to all three tubes.
Then place the center upright over the ends of the tubes.
Insert three of the large wedges into the bumper upright and tighten loosely with a
Torx T20 bit.
Extend the tubes through the pivoting upright about 3-8ths of an inch, and then loosely
secure with these large wedges as well.
Slide on the strap latch retainer and bang on the three end caps.
Now slide these three center tubes into the open ends.
Now connect the two halves, making sure there's a minimum of a 3-inch overlap here into the
bent tubes.
Now that we've got the two pieces put together, we need to take it over to the truck to check
the width.
Looks like it's a little bit too wide there.
Using a rubber mallet, straighten the center upright, and then using a double wedge and
a through-hole wedge, secure the center upright with the provided screw.
Adjust these bumper uprights here so that they sit on a flat surface of the tailgate
as well as inside the truck on the bed when it's inside the truck.
Now to secure the bed extender when it's on the tailgate, just take the strap and push
it right into the latch.
And when you want it back in the inside of the truck, just pull the tailgate handle and
it'll pop out.
Swing it back into the bed of the truck and close up your tailgate.
To remove the bed extender from your truck, just lift up on the quick latch handle right
here and pull on up.
It's made out of aluminum, so it's super light and super durable.
So you can use it as a chair, it'll support up to about 200 pounds, or you can use it
as a table to hold your gear.
That does it for this episode of Motorz.
For more information on Amp Research's products, go to amp-research.com.
For more of our videos, go to Motorz.tv.
And please be sure to subscribe to our podcast on Apple iTunes.
One, ah, two.
The bed extender can be used for survival situations.
As a step stool.
As a bed.
As a workout station.
For watching Motorz on Apple iTunes.
As a dog kennel.
Here you go, Blue, good boy.
For drying your old clothes.
As a storage rack.
As a towel bin.
And the universal mounting bracket can be used as a bottle opener.
