Yo, what's going on guys so basically the other day
I was scouring through wish.com to see if I can find any good deals for skateboarders
And what I came across was these Bones Reds apparently bearings that cost three pounds
That's like less than five dollars, so if you want to get some of these
I'm going to try these out, and we'll see if they're actually any good to be honest
I'm not sure I'm a little bit skeptical because three pounds obviously these are normally like 20 to 30 pounds
So we'll see how it goes. Let's put them in the wheels and give it a test, okay
So here we have the bearings we're going to crack the seal on these have a look at them on the inside
And then hopefully we can decipher whether or not these are real or fake either way
We're going to take them to the park and give them a try out
But let's just see how they look on the inside, so I've got my trusty scissors here
Obviously there's a plastic seal on them so you guys know that these are straight from wish
I'll also put a picture up on the screen of how much they were just to prove
I only paid three pounds, and yeah, we're going to crack the seal hopefully
These are pretty good because if they are it means you guys have found a super cheap bearing alternative
So let's crack these open. I mean it's looking good so far. I've got the no bones sticker
Which is what's usually oh actually my bad tell a lie the bones red sticker still there as well
It's pretty these are looking pretty legit. I'm not going to lie
We've got eight bearings here all bones res lookalikes at least these are very good
These are very good remakes if they aren't real, but to be fair these look pretty sick and for three pounds
I can't complain these look pretty legit been well can't complain about that. Let's chuck these in the wheels and see how far we get
About a big better boom let's tighten them up, and then let's go
Oh, that's good check this out. I
mean come on
That's a good spin right see you guys at the park, okay?
So we just arrived at the skatepark going to give the bearings a little test break them in now
I will say that we forgot the memory card for the camera
So I had to gun it all the way home gun it back, and I did that in like under five minutes
We're pretty close, but still did it pretty fast, and I would say just on that alone bearings are looking pretty damn good
But we'll break them in give them a proper test, and I'll talk to you afterwards
So after one run in the ball our wheel literally almost fell off the bolts super loose
Got to tighten it up properly obviously
But one of the young kids from the park has actually gone home to get us a wrench so we can tighten it and continue
With the video what a lad let's carry on
That was sick
I
So the young man himself has just dropped us off a tool kit
I'm gonna use that stick the wheel back on properly, and then we can do another ball
Well there you have it guys that was the 20-minute skate session unfortunately
We can't film anymore at the park because Holly has
Incredibly generously donated us her lunch break to film this stuff, so we need to go back now
I'm gonna do the rest of the talking at home. That was like a 20-minute skate sesh. We'll talk about it
We'll talk about the clips how the bearings felt, but for now we need to get home. I'll see you there
Okay, guys. We're back at HQ basically what I want to say about these bearings first and foremost is they ran
Incredibly the session at the park felt just like any other session the bearings ran smooth everything felt great didn't have any troubles any quarrels whatsoever
And for three pounds can't complain
I highly recommend you guys get these just to try them out for yourself if you don't believe me
But regardless we've got one more test to do and that test is I'm gonna take two official bones red bearings that I have in
My bag gonna take two of the bearings that we got from wish and I'm gonna spin them with the same power
We're using my hands, and then what we're gonna
Do is we're gonna time them and see how long they last see how long they spin around for
so basically with that being said let's move on to that test and that should give us some more of a
Concrete answer to how good they are compared to the real product
But considering the real product costs 15 to 25 pounds and the wish.com product costs only three pounds
I think it's pretty clear which one's gonna be a better value, but let's do the test and find out for sure let's go
Okay, there. We go. That's the these are the official bones res bearings
And the one on this side is the wish.com bearings, so let's put this bolt on give them a little speed test shall we
Okay, so first things first. We're starting off with the official bones res bearings. Let's go
There you go not bad not bad now. Let's try the wish.com
side
Right so I think it's safe to say that that was pretty damn close
I'm not gonna know which one was longer until I edit this but to be fair
They look pretty identical and for the fact that the wish.com ones are only three pounds
I highly recommend that you guys cop these try them out if you're looking for some budget bearings
I think these might be the ones that take over the skate market, but who knows I might be wrong
It might just be the ones that I got I might got a good batch
You might not get the same that is the thing of wish.com sometimes
They are a bit inconsistent, but to be honest. I think this test was a massive success
I would recommend you guys cop these bearings for three pounds you cannot complain, but yeah
I'll put a link to them in the description, but down below, and if you've enjoyed this video
Please hit the like button please subscribe hit that notification bell to be up-to-date of all the videos that I post
I post main videos twice a week short videos the other five days
So we do seven days a week on this channel, so you know we're putting in that work, but regardless guys
Thank you so much for watching
There's one more thing that I'll say we have a discord full of skaters almost
400 in there now all trying to help each other learn something new if you guys want to be a part of that the link
Will be in the description also with that being said thank you so much for watching
I'll see you in the next one