How To Use The Cove Lighting Technique - Roger Deakins Cinematography.

BHG Photo Video (Zoom Plus!)
31 followers
If you've ever studied or been interested in learning lighting techniques that are commonly
used in filmmaking, chances are you've probably heard mention of the cove lighting technique.
This technique is a method utilized and popularized by master cinematographer Roger Deakins.
Roger Deakins is an incredible award-winning cinematographer who has worked on some of
stunning films of all time, including Blade Runner 2049, 1917, Prisoners, No Country
for Old Men, The Shawshank Redemption, and so, so many more.
If you're not familiar with his work, I highly recommend that you study his films
if you are interested in improving your own cinematography skills.
Deakins is also very generous with his knowledge of his craft as well, even taking time to
answer questions from those interested on his own website's message board.
According to a reply to a fan on his own message board concerning cove lighting, Deakins says
that to him, a cove light is just manipulation of a bounce source into a concave shape, rather
than using a series of flat panels.
To break it down simply, he basically wraps half a room with unbleached muslin fabric,
then he illuminates it with multiple smaller lights.
This cove of light essentially wraps 180 degrees around the subject, giving off a flattering,
warm look.
With such a large source of light in the room, this allows the cinematographer to shoot various
shot lengths and angles without having to adjust the lights.
This also allows for fewer inconsistencies in the scene's lighting, and it allows actors
to move around the room freely without the cinematographer needing to adjust the lighting
in any other way.
So let's take a look at how we can set up and light our own scenes with the cove light
setup and hopefully produce a look that is soft, flattering, and natural.
For my bounce material, I purchased a couple sheets of unbleached muslin fabric from Amazon.
I think I spent around $40 overall for this material.
I will be using about 5 light stands and 5 light sources for this setup, and I will be
using clamps to attach my fabric to the stand to create a circular shape around the subject.
Remember that you don't have to have these exact materials to try and recreate a setup
like this.
Instead of clamps, you could use gaffer tape, and attach the fabric to walls or other objects
when possible.
You can also use work lights or whatever other lights you have at your disposal, and replace
the fabric with cheap shower curtains or other bounce materials that you have available.
Don't stress about the gear, just practice on working with the setup itself.
For this first setup, we're going to be lighting a smaller space in my dining room.
We'll have our subject seated at a table with some space behind for depth.
In the background, we have a window with blinds turned up and a practical lamp that we can
use to add some visual interest.
Remember that in Roger Deakins' own words, he considers the cove light to be a concave
bounce source instead of a series of flat panels.
So I tried to position my fabric in a round shape, semi-circling around my subject the
best I could using my stands.
I wrapped the cove around the table and my subject, and used three aperture light panels
bouncing off the fabric in three different sections.
I played around with various light angles, trying them angled down and up to see what
worked best for the space.
I also adjusted the intensity of each light until I found a balance that I liked.
I think the look here turned out flattering and well lit, but it's all depending on what
kind of look you're going for.
I also opened the blinds up a bit in the background and used some spray haze to give it a bit
of a more dramatic effect.
I then set up a wider shot here in my kitchen to demonstrate how you can light a wider area
and shoot different shot lengths or have your character move around the space using the
cove lighting.
The benefit here is that you don't have to break down any of the lights or move them
around in between different shots, and the lighting will remain cohesive across all
of the different shots.
I wasn't as happy with how this shot turned out, due to there being so much white material
in the kitchen for the light to bounce off of.
It really detracted from the warm, pleasing look produced by the fabric.
Lastly, I wanted to try a shot in a smaller, darker space.
Here I set up my cove surrounding my subject, lit my subject with reverse key lighting,
which means that the front side of the face closest to the camera is lit darker than the
side facing away from the camera.
And then I faced my camera towards the darker side of the subject's face.
I then turned on a practical light in the background and used one more light panel with
a cool temperature blue gel to simulate a bit of moonlight in the background as well.
As you can see, the cove lighting technique is a great way to light your scenes if you're
going for a more flattering, natural, and warm look with gradual roll off from the highlights
to the shadows.
This technique can help light larger spaces for multiple types of coverage.
It may take a bit to set up and adjust to get it right for your particular space, but
it's definitely a technique worth trying if you're looking to take your lighting and cinematography
to the next level.
If you've tried to recreate the cove lighting technique on your own, please post in the
comments below the gear you used, the techniques you used, any difficulties you faced, and
if you can, a link to an image or a video clip showing us your results.
That way we can all learn and grow from each other's mistakes and successes.
As always, I hope you found this video very beneficial, and if you did, please be sure
to like, share, and subscribe if you haven't already.
Thank you for coming along on this filmmaking journey with me.
I am Ryan, and I will see you on the next video.
Bye-bye.
