Papers future is not written in stone. Taylor sits down with Phil Wild of James Cropper to discuss the past of the company as well as the future and in turn of paper. Learn all of the science that goes into nailing the perfect color as well as the expansion into other areas of the market.
This episode is sponsored by Materials Today, an Elsevier community dedicated to the creation and sharing of materials science knowledge and experience through their peer-reviewed journals, academic conferences, educational webinars, and more.
Thanks to Kolobyte and Alphabot for letting us use their music in the show!
If you have questions or feedback please send us emails at [email protected] or connect with us on social media: Instagram, Twitter.
Materialism Team: Taylor Sparks (co-creator,co-host), Andrew Falkowski (co-creator), Jared Duffy (production, marketing, and editing), Ramsey Issa(editing assistance).
Keywords: Paper james cropper bags fibers composite mill
I would like to describe a field in which little has been done, but in which an enormous amount can be done.
This field is not quite the same as the others, in that it will tell us little of fundamental physics,
but it will tell us much about the strange phenomena that occur just below our perception.
In contrast to the natural philosophers of the past,
the scientists of this field delve into the recesses of nature and show how she works in her hiding places.
Their quest is to understand and create the imperceptible.
After all, there is plenty of room at the bottom.
Hello and welcome to the Materialism Podcast,
an exploration of the past, present, and future of material science.
I'm your co-host, Taylor Sparks.
I'm an associate professor of material science and engineering at the University of Utah,
and I am not joined today by my trusty co-host, Andrew, who's got some family stuff he's doing.
But today I do have a really cool episode for you. Give it a listen.
Do you know what that is? You've heard it before.
How about this?
Recognize it?
One more. How about this?
That's right.
On today's episode, we will be talking about that ubiquitous material,
even more so than steel, perhaps. It is absolutely all around us.
Since the time that you were a tiny child to now in college and beyond,
you have used paper.
Paper is absolutely all around us.
We sort of take it for granted.
In today's conversation with the CEO of James Cropper, a manufacturer in the paper space,
we're going to learn about what paper is and what it could be.
Some of the cool imaginations of what we could make paper become
for the tech sector, for the sustainability sector, and for a lot more.
So stay tuned for this interview with Phil Wild.
All right. Today we are joined by Phil Wild, the CEO at James Cropper.
Phil, I'm going to ask you to tell a little bit about yourself, but I'll do a quick introduction.
I noticed that you've been at James Cropper for just about 10 years now.
And prior to that, you did 20 years at 3M, and your education has been in business.
So most of the folks we chat to are material scientists,
but we're excited to talk to somebody who really brings business chops
and an understanding of how the business world works
when you go to try and commercialize these material science innovations.
So Phil, why don't you tell us about yourself?
First of all, good morning, Taylor.
Actually, good afternoon, because I'm sat here in England at the moment.
So yeah, you've just done a great introduction.
I mean, I'm not sure I need to add anything else to that, to be honest.
I think probably just expanding a little bit.
I am an engineer, so my original education was in manufacturing engineering.
And I spent the first part of my career in automotive, in engineering.
It probably took me about three years to realize I was a really bad engineer.
And I moved into supervision and management, and I kind of got the bug for business.
So pretty much most of my career, I've been running businesses to greater or form,
but in all circumstances, I've been part of a manufacturing organization.
So I've been in sexy products like sandpaper and masking tape.
But also I've been in aerospace and pharmaceutical and security,
and then more lately at James Cropper, which has its heritage in the paper business.
But now we're a material science business.
So I think to be an effective business leader in a manufacturing environment,
to have an engineering background or a chemistry background
or a science-based background is, I would say, an important advantage.
It's probably an essential advantage to really perform in that role
and work with the team around you.
You know, I've seen people like you that come from a technical side
and move towards the business side and then work in a technical space,
but I almost never see the opposite.
It's so much more, I think, possible when you have that foundation
of the fundamentals of how technology works and what it can and can't do
to then think about applications for it and how to commercialize it.
And I think it's tough to go the other way.
So I apologize for missing that.
I didn't realize the manufacturing degree training.
Anyways, we are delighted to have you on the show today.
I'm excited to talk to Phil because he is very close
to where I'm going to be for the next year.
I will actually be in Liverpool on a sabbatical for the next year,
and he's up in the Lake District,
which is definitely on my list of places to come and visit.
So tell us about where you're at and what do you guys do?
So I tell you when you're over,
you'll be an hour's drive away from the Lake District,
a World Heritage site, I hasten to add.
I'd ask you to bring your waterproofs and your woolly hat at the same time.
It doesn't matter if it's summer, winter, spring, bring them anyway.
But, you know, we're welcome to see you there.
So James Copp is a really unique business.
It's been around for, we describe ourselves as a business with heritage,
as opposed to an old business.
But we've been around for over 250 years.
So this year we celebrate, gosh, 177 years under Cropper ownership.
Now we are a listed business, but predominantly it's family owned.
And we have a sixth generation cropper,
who's the chair of our business.
But the business actually goes back previous to the Cropper ownership.
And, you know, it sits on the River Kent.
And it was a mill that has always used the water from the river,
either for a source of power or for a source of raw material.
And we still use it today as a source of raw material.
So we started off as a farming mill, making sickles.
The blade that we would use to be able to cut the...
I'm now going back 250 years, by the way.
And then it developed to grinding crops.
It then developed to using the power of the water for a fabric mill.
And then about 180, 190 years ago, it started manufacturing paper.
In fact, it was one of the first paper manufacturers in this part of the world.
Obviously, paper has been going for almost millennia.
But in terms of using cellulose fabrics or cellulose materials in order to produce paper.
So who are we today?
Today we have three businesses.
We have a paper business, which I'm sure we'll talk about.
A colour form business, which is moulded fibre made from recycled or reusable materials.
And a technical fibre business, which is the materials that typically we use for manufacturing composites.
And quite often the materials we use there are things like carbon fibre.
So we're a materials business.
We're a materials science business.
We're a medium-sized organisation.
We're about 650 strong.
We've got four different manufacturing sites in the UK and in the US as well.
Where I was just a couple of weeks ago.
And we're about $150 million turnover, to put it in perspective.
So we're a medium-sized organisation.
Great heritage.
But very forward-thinking as well.
Yeah, to stick around for 200 years.
And to move from just paper to the packaging space.
And now to technical fabrics.
You have to be forward-thinking.
You can't be stagnant or you're going to get left behind.
Well, that's fantastic.
I'm excited to learn about all three of those.
Maybe let's talk about paper first.
I think we take for granted paper.
Paper has just always been there.
Since we're little kids, since your very first drawings, paper is ubiquitous.
It's absolutely all around us.
And I think sometimes we forget that somebody has to make this stuff.
And not just make it, but we can engineer it.
To make the best possible version of paper.
So tell us about some of the advent in the history of paper manufacturing.
And in particular, places, things that you've done to make it an exceptional version of paper.
So paper has many, many, many different uses.
And as you say, it's been around for many years.
We're a bespoke paper manufacturer.
So we manufacture coloured paper.
We texture paper.
We coat paper.
And a typical paper manufacturer around the world will make very, very high quantities.
And low variety.
So it's the sort of paper you'd be using for your stationery that we're going through to your photocopy machine.
And so on.
We're totally the opposite to that.
We're a small manufacturer.
But we manufacture a very wide variety of products.
So we would describe ourselves as bespoke.
Let me give you some examples.
One of the areas that we focus on is the luxury packaging business.
And so today we're manufacturing materials for people like Burberry, Tiffany, Louis Vuitton, Chanel.
Those sorts of organisations.
So we're not making boxes or bags.
We're making the materials that are used to produce boxes and bags and packaging in that area.
But if you take, let's just take Burberry as an example.
To produce a product for a luxury brand like Burberry, it's about colour.
It's about aesthetics.
It's about finish.
It's about functionality.
And it's also the authenticity of the product as well.
How sustainable it is.
Where the sources come from.
So let me talk about that in a little bit more detail.
And let's take as a first place, let's just take the colour.
So you maybe go wherever you go shopping.
But if you went shopping in Burberry and you take a Burberry bag, you say, well, it's brown.
Well, it's not brown.
It's a particular shade of brown and it needs to be the same colour.
Time in, time out.
It's the brand bespoke shade that's produced.
And that takes a lot of chemistry.
We have the world's best chemists on colour.
And we use mineral dyes to make sure it's sustainable and biodegradable.
But the quality is right.
And I always use an example of a distillery, of a whiskey distillery.
Okay.
A taster, so what you call a master taster in a distillery will be taking a taste of the whiskey through the various stages and making a judgment on it.
There's a lot of scientific equipment involved.
And it's the same with us.
So we would have a lot of optical equipment in order to be able to measure colour.
We do it under different light sources.
We can see it under shop light, whether it's halogen.
We see it under LED.
We see it under sunlight.
And the colour can vary.
So we do all those measurements.
But we also have some of the world's experts that will just look at the product and say, it's too blue.
It's too blue.
It's too red.
And I'm looking at the product thinking, it kind of looks white to me.
No, no, no.
It's way too green.
Surely there's no green in there.
So a lot of craft involved in doing it, as well as technology.
And then, so once we have crafted the colour and crafted the chemistry to go in the colour, then that's produced for the brand.
But then we'll also create a texture.
So when you're picking a packaging product quite often, you'll find that the packaging is in texture embossed.
And quite often we'll do a unique emboss as well.
Another good example is Burberry.
But the emboss on there is a fabric emboss.
So it's there to give the image of a fabric product like the very classic trench coat that they produce on there as well.
So you kind of look closely at it and it looks nice.
It's covered in fabric.
It's actually covered in paper.
To give you another couple of examples, when we produce some colours, it can attract some of the grease from your fingers.
Or dust and so on.
So we also coat the product with a sustainable coating that can be recycled afterwards.
But it prevents any contamination of the paper.
When you're handling the product, it still looks pristine and new.
And Taylor, that's just the looks of the product.
And that's not even to talk about functionality.
We also manufacture the red poppy that's used on Remembrance Day.
It's a product that's synonymous on the 11th of November in the UK when we commemorate those who died in the war.
But you can also take other materials, like a shopping bag that's made out of yellow.
Now you can imagine, take a typical day, and you'll find out when you're in Liverpool.
You'll find a typical day in the Lake District when it's tipping it down with rain.
And Taylor's walking with his white jeans and you've got a nice yellow shopping bag.
You can't afford for the dye to run out of the shopping bag and come out on your clothes.
So it's what we call dye fast.
And that's part of the functionality.
By the time that the product is finished, you cannot get the color out of that product.
It won't come out under normal circumstances.
Also, if something goes into a shopping bag, it's got to carry all the different weights.
And we do that with the science of using the right type of fiber.
So we use products like birch, like pine, like eucalyptus.
And each has its own characteristics.
Generally, the longer the fiber, the stronger the product.
Because it provides an opportunity to link, absolutely.
The shorter the fiber, the better surface finish.
So whereas the products look identical, if you put a product on a box,
you'll go for surface finish because you don't need a strength in a box.
Because it sits around a gray card inner.
Whereas a bag is purely paper and whatever.
Whether shoes are going in it, or an Xbox goes in it, or whatever goes in it,
it needs to take the weight.
And what you'll find in a bag is quite a long fiber.
So you're tailoring your materials in order to create the right quality of product that comes through as well.
So you're absolutely right.
When we take paper for granted, there is an enormous science that goes into paper
in order to create the finished product.
So, gosh, I have so many questions from this.
One is, how often do you find yourself constrained by manufacturing technique and capability?
Because we know from a material standpoint exactly what microstructure leads to what properties.
And you can imagine, oh great, if we could just get the fibers aligned in such a way, we would have these properties.
But to actually make that, and to make that at scale, and to do that with actual machinery,
is that a common limiting factor or is it not?
I guess when you've been doing it for 200 years, it's probably not that new.
But there's a lot of intellectual property that goes into manufacturing paper.
Particularly bespoke paper, and particularly colored paper.
The tricky part is not just the manufacturing, it's swapping and changing.
And that's probably one of the limiting factors.
For example, we never stop our manufacturing process.
If you're manufacturing a product and you're going from one color to another,
we normally go from a light color to a dark color.
And when you're manufacturing something that's yellow and you go on to red,
you've got a period of time that you're making a product that's orange.
And therefore you create an engineering solution that allows you to change between one and the other as quickly as possible.
Your period of contamination of two products is to an absolute minimum.
Now as it happens, we will then take that out and then we'll put it back into our raw materials supply.
And then we'll use that again.
But obviously you don't want to be putting things through your process more than once on often occasions.
One thing I like about what you're describing is that you're describing a world in which we can have these luxury goods,
but we don't have to sacrifice sustainability.
You're providing the solution where you can have luxury goods and high quality stuff,
but also make sure that they're being done responsibly.
Tell me more about that.
What initiatives do you have to make sure that you can make things that are sustainable?
Because as you're describing paper and you're talking about coatings and protective things,
I'm immediately thinking of the fact that how on earth are you going to recycle this, for example.
When you start mixing polymers and paper together, it drastically changes the way that we recycle typical paper.
Can you talk a little bit about that?
I think it probably falls under a few different categories.
We can talk about how we make things today.
Some of the areas that we've changed and also the way that we're looking forward as well.
One of the areas I'll talk about is monomaterials and that in our industry is a key area.
Because as soon as you start combining and contaminating a product,
you're moving away from monomaterials and then the ability to then recycle afterwards is a lot more difficult.
So, whereas we do talk about colours and coatings, not that they're all natural based, they're all mineral based.
So, for example, some of the coatings that we have is actually potato starch.
Starch would give a clear, protective coating.
But again, it's cellulose based, it's recyclable, it's compostable, it's recyclable.
So, as soon as we start, for example, if we were to laminate paper with a polymer,
irrespective of it coming from a sustainable source, it will not be recycled afterwards.
And you've moved away from that monomaterial.
But moreover, one of the areas that we've moved into is how do we not use virgin fibre all the time?
So, despite that cellulose, which are trees, is a sustainable product.
And just for your information, we would only buy materials from what we call FSC source.
And I describe that as a giant farmer's field because it's a crop.
And for every one tree that we use, three trees are then planted to replace.
And a tree is never used for one source.
So, when a tree comes down for farming, the bottom of the tree is used for construction.
The middle of the tree is used for furniture manufacture.
And the top of the tree, which is all the spindly branches and so on, that's used for paper manufacture.
But where we've also moved to is actually how can we continue to make ourselves more independent from using virgin fibre that comes in?
So, we started to look at waste sources.
And one of the waste sources that we found was coffee cups.
So, I'm talking like a Starbucks takeaway coffee cup.
Now, that's a really good example of something that's not a monomaterial.
So, it's a fibre on the outside.
It's printed. It's got quite a lot of filler in it, like clay.
And then it's got a laminated plastic on the inside, clearly to protect coffee from spilling over and waterproofing the product.
So, we developed a process that takes out the plastic liner from the inside, removes some of the materials, which typically are minerals anyway.
So, mineral dyes and clay and so on.
And it leaves us with the fibre.
So, today, we're using half a billion used coffee cups.
So, from people like Costa Coffee, from people like Starbucks, from McDonald's.
And we are removing the polymer on to become a second life.
Now, we don't do that. We provide that to another party.
But that becomes carpets.
It becomes insulation wire, insulation material for wires.
The minerals that come off, we use for other things like animal bedding and so on.
And we reuse the fibres.
And that fibre then gets put back into our supply chain.
So, a lot of the materials we use today, they look pristine.
But actually, most of them are probably made out of at least 50% used coffee cups.
That's cool.
So, it helps us to recycle them back through.
How challenging is it then when your primary source for these different, I guess you can call it secondary source for coffee cups, whatever it is.
When they change, right?
When Starbucks changes the formulation for their cups or whatever else, right?
How robust does your process need to be?
Do you have to tune it in real time to the changing composition of your input, you know, recycled material or what?
Yeah, it's a great question.
We're quite discerning of the waste sources that we use.
So, we will know how a brand's cup is made.
So, just as an example, McDonald's.
If you take a coffee in McDonald's, quite often on the outside of the cup, they'll give you an extra liner to be able to hold your cup.
So, like an insulation.
Now, the challenge we have is the liner that they used was from what we call a recycled mechanical waste.
And what we mean by that is actually everything goes into the machine.
Paper goes in, plastic goes in, paint goes in, bits of metal go in.
And what you end up with is almost like a composite piece of material.
Now, the problem that we had was we found it very difficult to mechanically separate the two.
And therefore, you know, we couldn't really use the product.
And what happened then is all the waste from the McDonald's coffee cups then had to go to landfill.
Because it was either incinerated or landfill.
And mostly it was landfill because it couldn't be reused.
So, we had a discussion with McDonald's and they changed the outer insulation material to a pure form of paper.
Now, it doesn't matter if it was recycled or pure, but it was a pure form.
And for them, it cost them more money to do that.
However, what they were doing is they were paying for landfill.
And so, now that we're taking the product and not paying for landfill, which more than compensated for them to change the material.
And then we can then recycle the material back through in terms of our process.
So, yeah, it's an excellent point.
We are discerning it has to be the right sorts of material.
We are typically in line with the manufacturers of coffee cups.
The likes of Starbucks and McDonald's don't manufacture their own cups.
We work with the manufacturers who do that.
So, we know the materials that go into it.
Well, that's fantastic.
I teach courses on sustainability here at the University of Utah.
And one of the things we talk about is design with the end of life in mind.
And I think for the longest time, in not just materials, but in manufacturing in general, it was just about getting the best product to the consumer.
You wanted the best performance, and that was really what you wanted.
And it's oftentimes, I think, the case that you do have to take a slight reduction in performance, but to have it be recyclable, right?
So, you can have a sustainable product.
For example, you might put the, if you think of like rare earth magnets, right?
Rare earth magnets are absolutely all over the place.
But they're so embedded in the technology that you use, it's very hard to actually recover those.
And then you can't smelt those and capture them.
So, you actually have to design that product in a way that you can actually recover that afterwards.
We are very far from doing that as a field.
We're not even close.
But at least that the conversation has started is, I think, important.
And it's exciting to see case studies like what you've just described, where it's not only feasible, you can provide a great product.
But you don't have to take a big hit because you're thinking about the cost of the landfill versus actually providing this to a recycler.
So, I love that.
I love to see that example of design with end of life in mind.
And the term that we put on this is upcycling, not recycling.
Because what we expect is the end of that.
What's something that was going to landfill, we're now putting back into our product with a few that can be recycled again.
Yeah, absolutely.
Well, phenomenal.
Tell me more about, we sort of chatted about this custom paper, this high-end bespoke, I think you called it, sort of boutique, you know, high-quality paper.
Tell me now about the paper molding and what you're doing there.
Well, you know, a comment that you made earlier is you can't be around for more than 200 years and not be driving change and innovation.
And I described this forward thinking.
And that's true.
You know, to be a long-term business, you can't be me too.
You know, we have to be reinventing and developing new products and technologies.
And I describe ourselves as very medium to long-term thinking, not short-term thinking.
And I'm going to give you a couple of examples.
So as part of that, I'll answer your question on the packaging product as well.
But we established a team within our organization called Technology and Innovation.
And that team was 100% focused on looking at, you know, new technologies, new materials, new developments that are coming out.
Because what we found is, whereas we had R&D teams in each one of our businesses, our R&D teams were quite well-absorbed of dealing with customer issues.
Like there was a complaint, so we had to like, or maybe there was a supplier changing the materials or the developing material.
So quite short to medium-term thinking.
And what we were lacking is the long-term thinking and innovation and technology.
And that's why we created this team.
And, you know, I mean, what a dream team to be in.
Because, you know, you don't have the phone ringing with customers and suppliers.
And you can really focus on some fundamental changes in technology that are happening.
I set the team a challenge some years ago.
And I said, I want a third leg of our business.
But, you know, I want to understand some global megatrends and be focused on some global megatrends.
But I want to do something that we kind of know, know something about already.
And what the team developed was color form.
So you can imagine something like a molded fiber egg box, for example.
But on steroids.
So we do a lot of work on design and color and texture.
But essentially, we're making a package that's manufactured out of paper in any color.
And so today, you know, we're producing for companies like L'Oreal, Diesel, Armani, Mowi Hennessy, whiskey brands, other champagne brands.
And we're producing their outer packaging and inner packaging as well.
And it's an alternative to things like plastic packaging.
It's an alternative to boxes.
And quite often what you'll find with boxes, boxes are not mono material.
There's quite often plastic on the outside.
It's a gray inner.
And they've got magnets in there.
And they've got plastic inserts in there.
And we're creating mono materials that sit around the package itself.
But not only are we doing that, but we're leveraging our 200 plus years of chemistry on color in our paper business.
And we're applying that to color form.
So we can make molded fiber packaging in any color and consistent color each time.
So, you know, work that we do for Diesel and Armani, you know, it goes in black and it goes in blue and it goes in red to be able to meet the brand.
And the reason that we moved into that is because we recognized, you know, a global megatrend moving away from plastics to sustainable materials.
But we also recognized that, you know, it's a topic that we knew something about already in terms of, you know, we have fibers and colors and so on.
So it also matched with our values as an organization to, you know, both being forward thinking, but also driving a sustainable future as part of the product portfolio.
So in the end, it sounds like it's not only a better product, but a recyclable one.
Are there other advantages of this as opposed to, say, molded polystyrene or anything else?
What about cost, for example, or what about the types of shapes that you could produce or the structural integrity of the final?
Yeah, I think there are a couple of key areas there.
Quite often it's a point of sale product.
So the product is, you know, say it's a perfume, for example.
And our color form is the outer packaging of the perfume.
So it has to have a brand appeal.
So color is really important, which you certainly can't get on there.
But you certainly can't get that with a whole series of that.
Also, it's very clear that it's paper.
So from a consumer, a discerning consumer, it will be making purchasing decisions based on actually the authenticity of a product.
You know, when we talk about recyclable and sustainable products, if something is packaged in paper, then clearly it can be recycled and compostable.
It's sustainable, so unlike plastics.
But the design capability is unique.
So a little bit like in paper, where we can emboss, we're molding and we're molding intricate shapes.
So we can put text on there.
We can put unique shapes.
The product that we produced recently for Moet Hennessy is an outer packaging for a champagne bottle.
It's Runard.
And the design that we put on the outside is we took a digital image from the inside of the wine cellars in the Champagne region in France.
So we took a 3D image and then we created our mold with a 3D image of the wine cellars as part of that area.
So actually the bottle is the inside of that wine cellar.
You can provide totally unique and bespoke shapes.
And obviously for other brands, we're doing different and unique things as well.
Oh, that's really cool.
Okay.
All right.
So we've chatted about paper.
We've chatted about this structural paper for packaging, essentially.
And then the thing that is most similar to maybe what I've worked in in the past is the work that you've done in these sort of high-technology carbon fiber and other technical fabrics.
Can you talk a little bit about that?
Sure.
So if I can talk very briefly, we rewind back 30, 40 years.
Carbon fiber was a new material.
So today we might talk about, I don't know, say graphene is a relatively new material.
Then it was carbon fiber.
Now, carbon fiber is a fibrous material.
We were using cellulose fiber at the time.
So taking on the spirit of innovation, we had a team at the time said, hey, we found this new material.
It's carbon fiber.
We've chopped it up.
And so we've got small strands of fiber.
We want to run it down one of the paper lines and just see what it does.
So they ran it down.
They made an entire mess of the line, contaminated all the line.
I'm sure it was down for many months.
But they manufactured nonwoven material.
And they realized it didn't naturally bind.
So like a cellulose product, well, it has starches in it, and it naturally binds together.
They found that the carbon fiber didn't.
So they had to add a resin in there.
So various trials.
And they ended up with a fabric, a piece of nonwoven fabric that was made out of carbon fiber.
Super, super, super lightweight.
Oh, yeah.
And then they worked with a series of universities around the world to determine, so what does it do?
And the feedback was quite phenomenal.
And the feedback from universities at the time said, hey, this product has got some outstanding qualities to it.
Did you know that it's highly conductive?
So you've now got a fabric that is superconductive at the time, back in 20, 30, 35, 40 years ago.
But actually, this could be used for static dissipation.
It's exceptionally light.
And did you know that it's also got shielding properties?
So when we've wrapped this around a product, it prevents electromagnetic radiation.
So it acts like a Faraday cake.
So it's acting like a solid metal.
And yet, you know, it's kind of a 50th of the weight of a solid metal.
So that's actually how it originated.
It comes back to sort of the spirit of innovation, of trying things out and seeing what works and what doesn't.
And today, we've got a, trying to do this in dollars as well, a $50 million business in our technical fiber products.
So we now have lines that are dedicated to manufacturing materials of using this.
They're not contaminating the paper lines anymore.
And it gets used on a whole series of different things.
So, for example, every Boeing and every Airbus around the world has our materials on it.
And it's used for protection around.
So most aircraft today are manufactured out of carbon fiber.
It's very strong. It's very light.
It stays up in the air for longer.
So it doesn't have to come down and refuel as often.
It's not protecting the inside from electromagnetic radiation that's being created from the engines on either wing.
So our material is used as a shield, and it protects the very sensitive electronics that go from the cockpit down to the tail from any electromagnetic interference that's coming through.
It also provides lightning strike properties as well.
So when an airplane goes through a storm and is hit by lightning, the lightning hits the aircraft.
It goes around the aircraft and down throughout.
Clearly, if it went through, it's going to cause somewhat of a challenge.
And also, it's providing static dissipation.
So as the aircraft is flying through, again, through clouds and the electrons are being hit and it creates static,
then what our material provides is static dissipation through the body and then helps to release that.
So aerospace is a key area for us.
And then more recently, we've moved into what I would call green energy.
So our material is used for things like wind turbine blades.
So wind turbine blades are clearly uber light, but strong.
And our material is used as a material that sits on the outside of the blade.
And again, it's used for things like lightning strike.
It's also used for static as well.
But also when we've moved into the hydrogen space and the material that is used for the gas diffusion layer on the inside of a pen in terms of hydrogen.
And our material is used in 50% of the world's hydrogen fuel cells.
So everything from static fuel cells to fuel cells that are used for transportation.
And it's used as part of that whole body of the gas.
It's the fundamental chemistry and physics part within the gas diffusion layer.
And then we've actually made an acquisition recently that is for coatings that are used for electrodes to be able to produce the hydrogen material as well.
Again, I'm talking about green hydrogen here in terms of the pen process.
I'm curious about that last point.
You said you acquired a company.
This is to functionalize this, right?
So you add the carbon for the gas diffusion layer, but now you're actually functionalizing it with catalysts, I assume, so that you can actually make this process happen a little bit faster.
Fantastic.
So what we're trying to do is position ourselves through the supply chain.
So the coatings and the catalysts are used for the manufacture of hydrogen on one side, which is an acquisition that we made quite recently.
So we're essentially coating sintered titanium with materials like platinum, which would act as a catalyst.
And then on the other side of the supply chain, it's where the hydrogen is then used, particularly in transportation, whether it's things like trucks, whether it's heavy goods vehicles, whether it's marine or automotive.
It's actually used in the fuel cell itself that's then utilizing the hydrogen as an energy source.
Yeah.
Phenomenal.
Well, it sounds like I was just going to ask you what's on the horizon.
I was just curious about this very legacy or historical company that took paper that's been around for thousands and thousands of years and has reimagined it in several interesting ways.
And I was going to ask what's next, but you've sort of already described it.
Is there anything else you want to talk about?
Like what's coming down the line?
What paper could be in new ways that we could reimagine it?
So we're constantly innovating.
And I'll give you just a couple of snippets of things that we're looking at.
One is that we're also looking at, so whereas we've been using coffee cup and paper, what else can we use?
And some of the experiments that we're doing at the moment is on used clothing.
Oh, cool.
There's too much clothing in the world.
In fact, there's enough clothing at the moment to be able to clothe six generations of the world.
And what we're looking at is how do then we be able to look at cotton clothing and bring back the cellulose from the cotton clothing and then recycle that back?
So we're looking at techniques of how to remove the synthetic stitching, how to remove buttons, how to remove zips, and then how to then extract the cotton to come back into our products.
For us, that's now a work in progress.
Operationally, we're looking at how to totally decarbonize.
So we've challenged ourselves to be carbon neutral by 2030.
Paper is quite an energy-intensive business.
And today, we already have three solar farms that are owned by the community that we buy the energy from the profits and go back into the community.
And that's part of our ESG work that we're doing.
But then we've also got to change some of our technology on site in order to both reduce our energy consumption and then switch it away from a fossil fuel to a recycle.
So just a couple of snippets of things that we've got ahead, amongst some others that I probably can't tell you about just yet.
Looking very forward to learning about them.
Phil, this was a pleasure.
It was a really fun conversation.
It's fascinating to learn about what you guys do.
And we'll be in touch.
Fantastic.
Great to speak to you.
Talk to you later.
Okay, special thanks to our sponsors of the show.
We are sponsored by Elsevier's journal, Materials Today.
This is an excellent journal.
It's one that you should definitely be aware of.
If you've published in this space, I hope you'll consider reaching out to Materials Today.
It's an excellent publisher.
But they do more than their journal.
While that's an excellent journal and we read it a lot.
In fact, you've seen a lot of the episodes that we discuss.
We use articles from that journal.
But you'll also notice that they're much more than that.
Elsevier has really created a large community of researchers.
They have events.
They have conferences.
They have a lot there.
One particular event I want to point out for today's episode is the upcoming conference in Genoa, Italy in October.
Not too shabby.
I will be there.
Hope that you'll come too.
It is called the 7th International Conference on Multifunctional Hybrid and Nanomaterials.
I'll be there talking about the podcast.
But also giving a talk on some of the composite materials that we work on in our lab for electronic and ionic conductors.
So hope to see you there.
That will be in Genoa, Italy, October 19th to the 22nd.
By the way, if you want to learn more, you can check out the hashtag.
Hashtag HYMA for Hybrid Materials.
HYMA 2022.
Or you can Google.
You can find it on their Elsevier.com's website under the events section.
Okay.
Special thanks to everyone else that made this show possible.
As always, we like to appreciate the people that make the music for this show.
Alphabot and Colobyte.
You can find them on Bandcamp and Spotify and elsewhere.
They make awesome music.
We appreciate what they did to help make it available for this show.
We also want to hear from you.
Today's episode with Phil Wild, the CEO of James Cropper.
That was suggested by a listener.
If you have cool suggestions for other great people that we should talk to or technologies that we should discover or talk about, let us know.
You can send us an email.
That's materialism.podcast at gmail.com.
Or you can contact us on our socials.
We're most active on Instagram.
So at materialismpodcast on Instagram.
But also on Twitter and elsewhere.
Anyways, we love to hear from you.
If you haven't given us a review, pretty please.
We would love it.
And we will see you soon.
Until next time.
The inventors of fire, electricity, magnetism, iron, lead, glass, silk, cotton.
The makers of tools.
The captors of lightning.
The architect.
The engineer.
The musician.
Are all beneficiaries of the materials of this world.
And are bound only by their imaginations in manipulating those materials.