How To Properly Prune Crape Myrtle Trees Planted in Small Spaces

TightWadDIY
899 followers
Jan 29, 2016
This video shows the proper way to prune a Crape Myrtle tree that was wrongfully planted in a place not allowing for a natural growth pattern.
SEE FOLLOW UP VIDEO SHOWING GROWTH PATTERN HERE:
https://youtu.be/vJrX765Tajg
Welcome back, Titewads.
It is January in Georgia, near the end of January.
We've had a lot of good cold spells.
Actually had a little bit of light dusting
of snow last weekend,
so it is time to trim our crepe myrtles back.
As you can see, I have three crepe myrtles
in the front of my house,
and I'm gonna show you today
the proper way to do it.
The things you need are some gloves.
I like to use the really thin kind,
but just so my hands don't get scratched.
I wear my safety glasses,
so stuff doesn't get in my eyes.
And I have two different types of cutters.
I have the regular pruning shears,
and then I also, or loppers,
and then I also have some handheld units
that make it a little easier to get the details correct.
So we're gonna get in a little bit closer
and show you the proper method
for trimming your crepe myrtle.
All right, so what I like to do
is find the cut from last year,
so the previous year's cut,
and right here, it's here on this one.
Now I only wanna leave two branches
coming up from that area of the tree.
So each branch, each main trunk coming up,
I only wanna leave two shoots coming off at the most,
because next year I'm gonna have
all these other small ones coming off,
but I want the new growth to come off this year's cutting.
So I'm gonna go ahead and clean up this area around it.
You can do this with either your loppers
or your hand shears.
Go ahead and trim off all these small ones.
You can go back and clean it up later.
You need to make sure you're wearing your safety glasses,
because as you do it,
stuff falls out of the tree and into your eyes.
Go ahead and cut off this one.
So now I'm up here where my cutting from last year is,
and on this one, I really only have
one good piece coming off,
so I might go ahead and cut it down.
I'll probably leave this one and this one.
So I'm gonna trim this one off.
And then these, you cut above
the previous year's cutting a few inches.
So I'm gonna go up and leave
about six to eight inches on this section.
And if you notice, you can see some of the tip of it,
because I cut it at an angle.
So it's best to cut it at about a 45 degree angle.
So this one's good to go.
You can pull off some of the smaller stuff,
and then I just pull off all the little suckers
that have formed around it.
And some people go in and trim this middle piece
just for aesthetics in the wintertime,
but it really doesn't matter if this is still here
when next year's growth comes out.
This particular breed of crape myrtle
is gonna sprout out all over the place anyway.
It doesn't just have the big long shoots, as you can see.
It goes up and branches off into multiple branches,
whereas some of them just go up
and look like a fountain spraying out of the top.
So I'll go ahead and move over here to the next one.
I'll trim off all the low stuff.
This one only has one really good shoot coming out of it,
so I'm only gonna leave one.
I'm gonna cut it about the same height as the others.
There are two different theories
when cutting crape myrtles back.
Some people like to make them rounded on the top.
I like that trimming method
for the ones that come out like a fountain,
but for mine, I like a nice straight across edge
on the top of all my trees.
I try to trim all three of my trees the same height
so that they look good throughout the winter.
Right now, they just look like a big dead pile of mess,
but they look nice once you trim them down all flat,
and in the spring, they'll grow out fine.
It doesn't matter which way you print them back
as far as the growth patterns in the future,
but it's just whatever you like it to look like
in the winter, in my opinion.
So with this one, I left one.
This other one, I'm gonna go ahead
and take off this whole shoot
because it's not doing well.
You can see it didn't grow any new growth
off of last year's growth.
Everything came off the previous year,
so I just took the whole thing off,
and my trees fill out really well each year.
As long as you keep printing them back,
they'll fill out really well.
So as long as you have a shoot or two
in each area of the tree,
you're not gonna notice a difference
after the first few weeks of growing season.
With this smaller stuff, you can really just pull down
and break it off.
When you pull down, it just snaps,
and that works out just fine for you.
So you just continue this process all over the tree,
trying to get them all even and even height,
and then you can move on.
I'll show you the product as we get a little farther along.
Okay, as you can see, I've cut all of my branches
about six to eight inches above the growth from last year,
and I've pulled off all the little pieces
that hang down on each of the branches
just to make it look a little bit nicer.
It's not a necessary thing.
You don't have to do that,
but it just makes it look nicer for the winter months.
If there's any bark peeling off, just leave it.
It'll fall off on its own.
Now I need to repeat the process on the other two trees,
and since they're all clustered,
I'm gonna make them all this height.
So all my trees will be the same height across the top,
even though one sits a little bit lower elevation
than the other two.
All right, now you can see the finished product.
I have pruned all three of my trees.
They're approximately the same height.
They are pretty much straight across.
I won't say I did a perfect job
because I have some other work to do today,
and I've loaded all the materials in the back of the truck,
and I will take them to the local recycling center.
If you do haul this way, make sure you're responsible
and cover your load in the back of your truck
so that it doesn't litter the roadways.
As always, I appreciate you taking the time
to watch another one of my videos.
If you found this video helpful, give it a thumbs up.
Ask any questions you might have
in the comments section below.
Be sure you click to subscribe
so you can see other videos
about maintenance around the lawn
or making repairs in your home
or maybe to your lawn equipment.
If you'd like to see a video
showing the proper way to deadhead roses,
please click the video in the top left.
If you'd like to see a great video
showing how to get rid of your fire ants for good,
click the video in the top right.
Hope you guys have a great day.
