DIY: Hard Water Filter Change

TightWadDIY
899 followers
3 Video Views·Mar 31, 2016
My papa lives in a house that is over 100 years old. It is on a well system and he has very hard water. He really could probably use a sequence of filters but this is all he wants.
Welcome back to TyeWads. Today we are replacing the hard water filter for my grandfather's home.
This filter works between the well and the house to
filter the water to take out some of the impurities. As you can see the canister is pretty nasty.
They have very hard water here, so we have to change this filter pretty regularly.
This particular one is the Omni regular water filter system.
It has a canister on the bottom that unscrews and a paper filter that drops down in there, so we have to take that off and
replace the water filter.
The first step is to cut off your water supply to the filter, and then you can bleed out
the existing pressure on this model by holding down the button on the top until it stops flowing.
The easiest way I found to use these is to use an oil filter wrench.
They come with a strap and
you get it on there as tight as you can and then you twist it to remove it.
Once you get it loose and you can expect some water to drain out of it, but then you should be able to
untwist it by hand
to pull it off. As you can see he has very hard water,
so the filter is really dirty and it's caked up
with stuff all the way down at hard water deposits. So you just pull out the old filter,
dump the dirty water out,
clean out your cylinder, and drop a new filter in. If you have really hard water, the recommended filter is just this
paper filter, not the charcoal filter. The charcoal filter will clog up too quickly.
While it filters the water better, it clogs up so quickly that you'll be out here changing it very regularly.
So we're just using this paper filter and just drop it back down in there.
Then you put it back under here. Make sure you line everything up and hand screw it as tight as you can.
Now you put your strap wrench back on and come back the opposite way.
Make sure everything's good and tight.
The last step after you've turned the water back on is you can push the button on the top and
bleed out the air until you get a steady flow of water coming out. So that prevents your
lines inside your house from getting a lot of air pockets inside them and spraying everywhere.
So the water in your lines will now have sediment built up from where it blasted some of it through.
And you need to go through and turn on all your sinks
and flush your toilets in your house
until you have clear water coming out.
Once all the water is flushed,
sometimes it's a good idea to remove these as well and make sure there's no sediment built up in the backside.
This one looks pretty good. So we can just run some clean water through it and then replace it.
This is what the water looks like. The first flush after we changed out the line
or actually the second flush. The first flush during the tank
with the previous water and this is the second flush. So we'll flush it again and see if clean water comes through.
You can see it's still cloudy. This is the first one that we
first bathroom that we started whenever we started flushing all the lines.
So we'll flush this one one more time and it should be nice and clear.
Changing your home water filter can be a very easy experience if you follow the steps correctly.
Just keep in mind this is only for homes that run off a well or their own pump system.
If you have city water, you likely don't have a filter between the
city water lines or county water lines and your home.
If you found this video helpful, give me a thumbs up and subscribe to my channel.
If you want to see a video showing how to replace the drain in your shower, click the video in the top left.
If you want to see an easy way to fix your toilet that takes about five minutes and about three dollars, click the video in
the top right. Hope you guys have a great day.
