Getting My New Shop WORK READY With NEW FLOORS

RetroCarz
284 followers
1 Video View·Oct 7, 2023
On today's episode of WatchJRGO we are back at my new house and new shop and today we're getting epoxy floors
What is going on guys? I am WatchJRGO and today as you can see I'm here with Mike
You guys have seen Mike many times before on the channel
He lives in Atlanta, but he's here in Wichita today because we're gonna go work on a car
That belongs to his parents that is very special and very rare, but that's not why we're here today
Today we're getting epoxy floors in the shop and Mike was over here helping me clean things up before they got started you can hear
I'm sorry. I know you can hear it, but they are busy inside with the pressure washer and it slides a big-boy pressure washer
So they're pressure washing the floors out right now getting the grinding done. There's a few things
They did want to grind so they've got their big floor grinder in there. Let's go take a look
Yep, it's loud
So we got the entire building emptied out
There's a bunch of new problems today with the spray foam, which is very unfortunate because obviously I don't want to paint this place again
But a whole bunch of the spray foam pulled back. It's really crazy. I've never seen anything like that
Big gaps big gaps. Yeah all new as of last night, but Mike and I are here finishing up the lock install
So we actually we did the locks yesterday
But there's a sensor to tell the locks when the doors are open and closed. So that's what we're working on right now
We are getting the sensor out of here
Just like that and then it snaps into this and you drill a hole and you mount that sensor inside the door frame
And then the lock will tell my phone if the doors are closed. So I know remotely what's going on
So that'll be really cool. It only takes a couple more minutes
I didn't have time the other night, but we're adding that to both of these doors right now shouldn't take long at all
So we punched a hole directly above our strike plate. This is a crazy powerful magnet
I gotta say it lifted up our spade bit from way above it and now
That ought to stay. I mean it stayed at my house. I've got the same one
It's all there is to it. All right, let's close the door real quick. All right now we have to try again
Now we're inside so enable the door sense
Door sense is installed
Rotate the lock until your door is locked
next
Rotate lock until unlocked
next
Calibrating open the door until it's wide enough
next
Hold the door. So it is slightly ajar
Next close your door
Next your lock has been calibrated. Ah, look at that closed unlocked open
closed
We got it. All right guys. Sorry bad dress
I keep showing you the app and the dumbest possible way because it shows the address that's out
Can't have that. So we got one done. Now. We're off to the shop to do the other one and
Really go buy a door handle. It's still high on the priority list
I'm pretty sure this is one of those like bird homes
For them to kind of like grow up in but it looks ridiculous on the building and obviously we're gonna paint the building soon
So we are hopping up here to get it down
Ridiculous
Yes, I'm aware scissor lifts go up, but it is completely unbalanced and on dirt. I'm not gonna be the guy that goes up
What else is holding this up?
Not that
There's bolts behind this
They stripped all these going in
There's the bird's nest no birds
How many do I need to put back one two
six screws
They were just trying to create some leak points in the building. That's I can only imagine that was the plan
This looks a lot better I think
All right, guys, we've been here for a couple hours. The floor guys had a change of plan
Unfortunately, they were thinking it was just a wash and lay down the primer for today and do epoxy tomorrow, but now
They're doing a complete diamond grind and then laying down the primer
So you guys can see the concrete dust flying out. They've got a lot of water and a lot of grinding going on in there
All right. I think that's all the inside we need to see because it's just a lot of noise
but they're in there putting in work grinding it front to back and
There's going around the edges right now, but not too much time they'll be done with the grinding and maybe
Maybe there'll be primary today, but I doubt it because obviously the concrete has to dry out. That's the main thing
so
We'll be back here in a few. We're gonna go finish up some other stuff and then come back and we'll do an update
Hey, look at that. The Escalade is out and about well, it is almost dark now
They started I like 9 in the morning something like that. It was pretty early and
The floor guys just took off. So I hate to even walk in here
I'm trying to be very careful not step in the mud, but they ended up diamond grinding the entire floor
Let's turn the lights on and take a look
So you guys can see they took a layer off of all of it and
Tomorrow they're coming back in to fill all these little hairline cracks with caulk
Just like the last building it keeps the I mean, they're pretty visible if you don't fill them
That's the main thing and also it can take a lot of material into them
so they're gonna run through fill all these little cracks, you know, even the small stuff like that and
Then prime over the top look at that. You can really see
The bathroom and everything so we think that's a closet flange
That you know, they said they actually dumped a lot of water down here and it never filled up or anything
So maybe it goes somewhere. We're working on getting somebody out here with a camera snake to check it out
There's even a floor drain over there for like, you know pushing your squeegee into mop sink
Whatever you want a bathroom would be very interesting. It's in the worst possible place
I still kind of think we're gonna just cut that pipe in the middle off flush and leave it alone
But if we could have a bathroom out here, it would be cool the thing we don't have any water supply
That's the other side of it
But on the spray foam side things have gotten bad even even worse since this morning
Look at that pulled back pulled back pulled back pulled back pulled back pulled back pulled back pulled back pulled back
A lot of these were this way this morning and it's weird the way it's going down. It's just like
Crushing itself back. It's still it's still it here
It's not stuck to the panel back here, but it's stuck everywhere else
Strange that is super strange
All I know is the spray foam guys are gonna be back to fix that and I'm sure they'll take a look at this
And and we'll figure something out
Hopefully it's just filling it. Maybe it's popping these ones off and reshooting them either way
It kind of breaks my heart because you know, it was a lot of money and this is the greatest installation you can possibly have
my dad has
300 foot long of buildings. You guys have seen that shop many times
It's all spray foamed and they don't run any AC or anything, but you can work out there in the summer
That's how good this stuff is. It's between our 13 with nothing else done
R13 is the minimum and it goes up where it's like 3 inches and a lot of this building. It's like our 26
It's basically double awesome insulation the best stuff there is because it seals all the air gaps, but back there
The air gaps aren't sealed so that's a problem. Anyway back to the epoxy floors tomorrow
Like I said caulking, hopefully the primers on tomorrow and the next day
They said they're gonna have the epoxy done and the other problem is now that the epoxy will be done
We can't get back in here for seven-ish days
Alright, let's lock this place up
We are done for the day and the next update will be tomorrow where you guys get to see some of this go down
It's actually dry and ready to go up here at the front where there's a lot of air movement
The back there it's gonna take all night to dry. I wish there was more I could do today. There's really not
I was up on the roof earlier trying to make sure I had that
100% good to go. I've been going around the building replacing any nails that are falling out with screws
So I spent a lot of time doing that today
Basically trying to get this thing all cleaned up and ready for the next 20 30 40 years of its life
Hopefully we don't have to touch it again after it's all wrapped up here
We also finished throwing away all the carpet from the master bedroom cleaning a few things up
You know, we've been here all day just working on random projects, but really none of it was enough to make a whole video
So we'll come back tomorrow and show you guys more of the floor. Let's rock and roll
All right. How's it going here?
All right
Finished dude, it looks incredible
Finally revealing the color here. So this is the primer. It's like a light gray
It looks like a new floor
You guys are knocking it out in here
well, we will be back and you guys have like
20 minutes left. I was like you're done
Okay. All right. I'll come back and check it out a minute. Thank you
All right, guys, we're heading into the basement with chase because chase
Does a ton of low-voltage installs? Wait, you want to give him a give yourself a company shout out?
Let's get some light. Let's get some light and then give yourself a company shout out here
We got to walk through the dark on video. Everybody loves that. All right, we're here in the mechanical room
But what's your company white net solutions white net solutions here in Wichita
If you guys need some low voltage or data cabling data column all that good stuff
Yeah, and we also do Wichita light that does permanent
Holiday decorated Christmas lights. Yes, that stuff's really cool. If you don't want to take your Christmas lights down over here
Here's your guy. All right, so our game plan today is adds me through net cables and
Obviously pretty simple. I usually do it myself, but I want to do something different this time
And also, I know I never have to go up walls
I'll just take the wall out if I do go up the wall
Chase has all the special stuff to go up and down walls like those monstrous drill beds like 10 foot long
So I don't have any of that
The game plan is to drill somehow
From the basement from the attic to the basement basement to the attic and get a big piece of plastic conduit in there
So we can run cables whenever yeah, so it'll make things serviceable. It'll be nice
It's game plan. All right, dude. Well
Wherever you want to put it. All right, we gotta find a good wall that will
Span and then get started. Cool. Let's do it. Awesome. I know it's a little hard to see
That's not hard to see we got a giant orange snake coming down here. The cables are all gonna go on that should hold 20
Pieces of cat six. It's a two inch or two and a half something like that
It's big and we already started demoing some of the junk off the walls down here in mechanical and this whole shelf here
it's gonna go in the trash and my rack will hang on the wall once I hang a
Sheet of plywood there
So we'll get a place to lay in all the data in this house and start gripping junk like that out of here
by the time we're done this place should look immaculate and
Today, I need to get three lights to replace all the lights in this mechanical room and we get the fluorescence out
We'll get the burnout light bulbs out and we'll have a place that we can
We'll be able to see while we work then we won't have to use my phone for you guys to see what's going on
I made some room
Got that shelf out of there already. So now we just need some three-quarter plywood and
We're home free, you know
That's not it
Thanks, man. Yeah, sure thing
Well, if you guys need low voltage, that's your man. Well, there you go. We can now get data throughout this house
We got a bunch of cameras that need power over Ethernet a lot of cables going
upstairs to downstairs so we can go back down the walls and
Get Ethernet jacks in where we need to Wi-Fi access points all that good stuff. That was a huge help
I mean you guys can't imagine how much better it'll make life and over here. We have floors that I'm allowed to walk on
Not yet. That's all I know not yet
This was the last part done and I kind of want to touch it. So this looks like nothing on camera
I know but I should be able to walk on it by tomorrow
We're gonna have to close the garage doors here in a couple hours. So
You know for now
I'm just gonna leave them open let it air out as much as it can the Sun's beating down on it. It should drive quickly and
final update
Just a lot done really quickly and I'm excited. Does that not look incredible in there? Nice
Brand new floors. Also, I would have given JR a plug
But like I said the last time when he did the big shop
He doesn't have like a business name that I can give you guys
Everyone just calls him and works directly with him
So even though he does amazing work, I can't get I'm not gonna give out his phone number. So I guess
more floors for me then
If you're around here and you hit me up I'll give you his number
I think we got him another job today another double the size of this
So he does great work and if you're around Wichita, you can probably get a hold of him and get some awesome floors done
It's dark now. I just came back and I felt the
Epoxy push down pretty hard my finger and I can still I can see just the beginning of a fingerprint on the epoxy
So we're gonna let it sit overnight before we actually walk in here. You're supposed to wait 24 hours. It's been
Eight hours something like that when we come back
We'll be able to go in the shop for the first time and then after this weekend
Basically, we'll be ready to start moving stuff in here. So very soon, but I am pumped
It looks like a brand new floor. Hopefully even here in the dark. You can pretty much see
It looks like before the new concrete and it's nice and dark
This color was the darkest gray that they showed they could make for the it's like a urethane top coat on top of an epoxy
primer
They had a black they had a dark gray. This is the dark gray
So I figured if we went super dark on the floors and nice and bright on the walls
We'd have a winning combo and once the lights go in
It's gonna be bright in here. So that is it for today guys. Thank you so much for watching
Don't forget to head on over to shop watch chair calm for cool shirts
Just like this and please like share subscribe do whatever you want to do and I will talk to you next time
Now I have to shut and lock these doors without going inside. That's gonna be that's gonna be fun
