EC465 MEMS || Lect 4 || Pressure Sensors || Temparature Sensors || KTU
This Video Lectute contains
1.Pressure Sensors
2.Temparature Sensors
For
Course Overview: https://youtu.be/Br82mvn5beg
What are MEMS? https://youtu.be/TB7NTcN9tAg
Acoustic Wave Sensors | BioMEMS : https://youtu.be/XBZGUlU4QCg
Chemical Sensors || Optical Sensors :https://youtu.be/WKGFXMNb8sY
#ktu#engineering#kerala#mems #microelectronics #vlsi #ktunotes #ece #btech#ktustudents#sensor #microsensors #microdevices #microfabrication#ktuececlassroom
Hi all, today we are going to discuss about pressure sensor and thermal sensor in MEMS 1st module.
In last class, we have discussed about chemical sensor and optical sensor.
Today we are going to discuss about pressure sensor.
What is pressure sensor?
Micro pressure sensors are used to monitor and measure minute gas pressure in environment or engineering system.
For example, pressure sensor is used in automobile industry to detect intake pressure of engine.
Pressure sensor is the first MEMS device developed and produced for real-world application.
Micro pressure sensor works by mechanical bending of thin silicon diaphragm by contact air or gas pressure.
This is based on mechanical bending of silicon diaphragm.
Micro pressure sensor is used to monitor and measure minute gas pressure in environment or engineering system.
For example, pressure sensor is used in automobile industry to detect intake pressure of engine.
Pressure sensor is the first MEMS device developed and produced for real-world application.
Micro pressure sensor works by mechanical bending of thin silicon diaphragm by contact air or gas pressure.
This is the diagram of pressure sensor.
Let's see how pressure sensor works.
When we apply strain on diaphragm, it will deform.
To measure deformation of diaphragm, we place piezo resistors in diaphragm.
Piezo resistors are R1, R2, R3, R4.
Piezo resistors are placed in a strategic location.
Piezo resistors are made of silicon.
Piezo resistors are very small in size.
Piezo resistors are highly sensitive devices.
Piezo resistors produce electrical signals corresponding to the changes in the diaphragm.
Piezo resistors produce voltage corresponding to the changes in the diaphragm.
Piezo resistors measure pressure value.
Piezo resistors are R1, R2, R3, R4.
Piezo resistors are placed in a strategic location.
Piezo resistors measure pressure value.
Piezo resistors measure voltage corresponding to the changes in the diaphragm.
Vout is equal to Vin into R1 divided by R1 plus R4 minus R3 divided by R2 plus R3.
R1, R3 are resistors induced by longitudinal and transverse stresses.
R2 and R4 are reference resistors.
Two common types of micropressure sensors are used.
Sensor using piezo resistors.
Sensor using capacitors.
Capacitor and piezo resistors are used.
Both have their advantages and disadvantages.
Sensor using piezo resistors.
Piezo resistors are small in size.
Input-output relationship is linear.
Piezo resistors are temperature sensitive.
Sensor using capacitors.
Capacitors are bulky.
Elevated temperature application is suitable.
Input-output relationship is non-linear.
Capacitors are smaller in size.
Input-output relationship is linear.
Input-output relationship is temperature sensitive.
Capacitors are small in size.
Input-output relationship is linear.
Tends to be bulky, suited for elevated temperature application, non-linear input-output relation,
lower cost.
These are the pressure sensors we use, sensors using piezo resistors and sensors using capacitances.
Now let us see the major problems in pressure sensors.
The first one is system packaging.
In system packaging, we use diaphragm in the pressure sensor.
It should be properly packaged.
Similarly, the protection for the diaphragm should be provided.
The diaphragm's contacting media is pressurized media.
This media may be corrosive or erosive or high temperature.
All these may cause damage to the diaphragm.
Major problems are system packaging and protection of diaphragm from contacting pressurized media
which are often corrosive, erosive and at high temperatures.
So these are the problems we have to learn about pressure sensors.
In pressure sensors, we use MEMS device for real-world application.
It is based on mechanical bending of silicon diaphragm in contact air or gas pressure.
We use piezo resistors in it.
Piezo resistors are silicon doped materials.
Piezo resistors are very small in size and in micrometer range.
The output voltage varies according to the resistance.
There are two types of sensors.
There are sensors using piezo resistors and sensors using capacitances.
We have discussed the advantages and disadvantages of each.
The major problem in pressure sensors is to protect the diaphragm.
These are the problems we have to learn about pressure sensors.
Now let's learn about thermal sensors.
Thermal sensors are used to monitor or measure temperature in an environment or of an engineering system.
Just like pressure sensors, thermal sensors are used to measure temperature in an environment or of an engineering system.
Common thermal sensors are thermocouples and thermopiles.
Thermal sensors work on the principle of electromotive force generated by heating junction made up of dissimilar materials.
What is the principle of thermal sensors?
The principle is based on EMF generation.
How does EMF generate?
When heat is applied to two dissimilar materials, an EMF is generated.
The thermal sensor works based on that EMF or electromotive force.
Thermal sensors are used to measure temperature in an environment or of an engineering system.
Common thermal sensors are thermocouples and thermopiles.
The principle is based on EMF generation.
When heat is applied to two dissimilar materials, an EMF is generated.
The thermal sensor works based on that EMF or electromotive force.
This figure is an example of a thermocouple.
One is a single junction thermocouple and the other is a dual junction thermocouple.
Heat is developed in the portion where two metals meet.
A voltage output is obtained correspondingly.
The voltage generated by the temperature rise in the bed is equal to
V is equal to beta into delta T.
Beta is the Seebeck coefficient.
V is equal to beta into delta T is the voltage generated by the thermocouple.
Beta is the Seebeck coefficient.
Seebeck coefficient is different for different thermocouples.
Thermocouples are made of connecting a series of thermocouples in parallel.
V is equal to beta into delta T is the voltage generated by the temperature rise in the bed.
V is equal to beta into delta T is the voltage generated by the thermocouple.
N is the number of thermocouple pairs in the thermocouple.

