Mixed signal circuit design -ADC Specification (part1)
Oct 6, 2023
We have learned the specification of DAC
Now we are going to learn the specification of ADC
When we learned DAC earlier, it was a single analog output with multiple digital inputs
Here it is the opposite. When it is an analog to digital converter, the input is an analog signal
Here it is a single analog input with multiple digital inputs
Here also there is a V reference
Input is an analog signal with an infinite number of values
It is quantized to convert it to n-bit digital word
In this case, the number of quantization levels is 2 raised to n
This figure is a transfer curve of an ideal ADC
Figure B shows the corresponding quantization error
The first figure is a transfer curve of an ideal ADC
In a transfer curve, the input is always in the x-axis and the output is always in the y-axis
Since this is an analog to digital converter, the output is a digital output and the input is an analog input
Analog input is represented by Vin by V reference
Digital output code is denoted by D
What is the difference when we learn it earlier?
Here the output is an analog output
DAC is a digital to analog converter
In the case of DAC, the analog value is V out by V reference
In this case, the output is a digital input
Now let's see the rest of it
In this case, since the input signal is continuous and the output is discrete
The transfer curve of ADC resembles that of a staircase
The 2 raised to n quantization levels corresponds to digital output code 0 to 7
The 2 raised to n quantization levels correspond to digital output code 0 to 7
The maximum output of ADC will be 111
If we take a 3-bit ADC, the maximum value of 3-bit ADC is 111
The maximum output of 3-bit ADC is 111
To get 8V correspondingly, the input voltage is 7 by 8
The maximum output of 3-bit ADC is 111
Figure B is erased by quantization
1 LSB for this ADC is ideal step width 1 by 8 multiplied by V reference
Analog input is an infinite-valued quantity, and output is a discrete value. An error will be produced as a result of quantization.
Quantization error is defined as the difference between actual analog input and the value of output or staircase.
Where the value of staircase output V staircase can be calculated by D into V reference divided by 2 raised to n
VLSB is 1 LSB in voltage.
Quantization error is defined as the difference between actual analog input and the value of output or staircase.
The value of staircase is 0 in the dotted line.
The value of staircase is equal in the dotted line.
Quantization error can be generated by subtracting the value of staircase from the dashed line.
The sawtooth waveform is formed centered above 1 by 2 LSB. Ideal case, the magnitude of quantization error greater than 1 LSB and less than 0.
The magnitude of quantization error greater than 1 LSB and less than 0.

