KTU BIOMEDICAL ENGINEERING || EC365 || MODULE 5 || LECT 27 || CT SCAN
This video contains Computed tomography : Principle, Image reconstruction, Scanning systems and applications
For the full video of this course : https://www.youtube.com/playlist?list=PL2UV2EJdMQmh3GlNha5gwN8IsIyjOKcGh
#ktubiomedical #biomedicalengineering #ktu
Hi all, today we are discussing about computed tomography or CT scan
let's see what is CT scan
X-rays are used to examine internal structures
X-rays have some main limitations
the main limitations of X-rays are
1. Examination of 3-dimensional information of body in a single plane makes diagnosis is difficult and confusing
2. The photographic film usually used for making radiographs has limited dynamic range
3. The photographic film usually used for making radiographs has limited dynamic range
These two are the main limitations of using conventional X-rays to examine internal structures of the body
These limitations have been overcome by means of CT scan
CT scan is used to overcome these limitations
CT stands for Computed Tomography
Tomography is a term derived from the Greek word Tomos
meaning is to write a slice or session
In computed tomography or CT, the X-ray picture of the patient is taken from various angles and mathematically reconstructed to get the detailed structure of the body
In computed tomography, X-rays from a finely collimated source are made to pass through a slice of the object or patient from a variety of directions
While passing through the tissue, some of the X-rays get attenuated in the tissue and remaining is transmitted through it
The length and density of the tissue, presence of bones, these calculated tissue attenuation and transmission characteristics are composed to get CT image
X-ray tube and collimator are used to generate X-ray beam
The intensity of X-rays being received varies depending upon the length of the cross-section of the body, presence of organs and bones
X-ray tomography consists of the following four major subsystems
Processing unit converts reading into intelligible picture information
It presents this information in a visual form and includes other manipulative aids to assist diagnosis.
Storage Unit
This enables the information to be stored for subsequent analysis.
These are the four major subsystems of CT scan system.
Image Reconstruction
The formation of a CT image is a distinct three-phase process.
1. Scanning Phase produces data.
2. Reconstruction Phase processes the acquired data and forms an image.
3. Digital to Analog Conversion Phase converts the analog image to digital image.
These are the three distinct phase processes of CT image.
During the scanning phase, a fan-shaped X-ray beam is scanned around the body.
The amount of X-ray radiation that penetrates through the human body is measured by the dittatase that intercepts the X-ray beam after it passes through the body.
The projection of the fan-shaped X-ray beam from one specific X-ray tube focal spot positions produces one view.
Each view produces one profile.
Many views projected from around the patient's body are required in order to acquire the necessary data to reconstruct an image.
Next is the Reconstruction Phase.
Image Reconstruction is the phase in which the scanned dataset is processed to produce an image.
The image is digital and consists of matrices of pixels.
The filtered back projection is the reconstruction method used in CT.
Filtered refers to use digital image processing algorithms that are used to improve image quality or change certain image quality characteristics such as detail and noise.
Back projection is the actual process used to produce or reconstruct the image.
This is the block diagram of the image reconstruction computer used in CT scanning.
The blocks are X-ray beam, signal processing analogy to digital conversion algorithm,
measured value preprocessing correction, third block convolution, fourth block back projection.
These three blocks are called High Speed Special Purpose Computer Hardware Program.
This is the block diagram of the image reconstruction computer used in CT scanning.
Next, let's see some applications of CT.
Unlike other medical imaging techniques such as conventional X-ray imaging, CT enables direct imaging and differentiation of soft tissue stretches such as lungs, lungs tissue, fat, liver.
CT imaging of the head and brain can detect tumours, show blood clots and blood vessels.
Due to short scan times of 500 milliseconds to a few seconds, CT can be helpful for all anatomic regions including those susceptible to patient motion and breathing.
CT images are also used as basis for planning radiotherapy, cancer treatment.
CT is also often used to follow the course of cancer treatment to determine how the tumour is responding to treatment.
This enables the use of CT in orthopedic medicine and imaging of bony stretches including prolapse or protrusion of vertebral discs, imaging of complex joints like shoulder or hip, etc.
This enables the use of CT in orthopedic medicine and imaging of prolapse or protrusion of vertebral discs, imaging of complex joints like shoulder or hip, etc.
Thank you for watching this video. Please subscribe to my channel.

