KTU BIOMEDICAL ENGINEERING || EC365 || MODULE 3 || LECT 18 ||Respiratory System Measurement
This video contains:- spirometer, body plethysmographs
For the full video of this course : https://www.youtube.com/playlist?list=PL2UV2EJdMQmh3GlNha5gwN8IsIyjOKcGh
#ktubiomedical #biomedicalengineering #ktu
Hi all, today we are discussing about Respiratory System Measurement
In this, we are discussing about Spirometer and Plethysmography
Let's see the Spirometer
Spirometer is a device to measure Lung Capacity and Respiratory Volumes
In this, a moving bell is placed inside the chamber of water
A weight is used to balance the bell jar
So that the gas can be absorbed by the atmospheric pressure
The height of the bell jar above the water will be proportional to the amount of gas inside it
A breathing tube is connected to the patient's mouth
If no one is breathing, the bell will be in a resting position
When a patient exhales, the pressure inside the bell will increase and the bell will rise
When a patient exhales, the pressure inside the bell will decrease and the height of the bell will decrease
The height of the bell depends on the inspiration and respiration
Let's see inside the figure
There is a bell jar
The air inside the bell jar is above the water
The mouthpiece of the patient is connected to the patient
The movement of the bell jar corresponds to the patient's breath and respiration
If the patient exhales, the bell will rise and the height of the bell will increase
If the patient exhales, the bell will move down
A pen is attached to the weight in order to record volume changes in a piece of graph paper
Some spirometers also produce an electrical output by varying linear potentiometers according to the height of the bell
A spirometer is one of the primary equipment used to measure pulmonary function test
It helps to check lung's health condition
A spirometer is one of the primary equipment used to measure pulmonary function test
It helps to check lung's health condition
Next is body plethysmography
Body plethysmography is a well-established technique used for lung function determination
It is commonly used to find functional residual capacity and total lung capacity
Plethysmography is a chamber resembling a glass-walled telephone box in its shape and volume
Let's see the figure
During measurement, box is closed with an airtight seal except for malcontrolled leak that is used to stabilize the internal pressure
There are two pressure transducers in the box
One is used to measure the pressure inside the box
The second one is used to measure the mouth pressure
The principle measurement of this is the change in the box pressure
The basic physical principle is based on boils
Let's see the working
During inhalation, volume of the patient inside the box increases
Hence, the box pressure increases
During inhalation, oxalate pressure increases
During exhalation, oxalate pressure decreases
Let's measure the pressure change using a pressure gauge
and compare it with the body pressure using P1
The resultant is displayed in the CRO
This is the working of body plethysmography
I hope everyone understood this topic
We discussed about spirometer and body plethysmography
See you in the next lecture

