EASY Headlight Bulb Replacement - Toyota Tundra

TightWadDIY
899 followers
Dec 11, 2017
Replacing headlight bulbs may seem like a difficult task but thankfully you can do it in less than 5 minutes on the Toyota Tundra. All you need is a replacement bulb and your keys.
Welcome back guys, it's the tightwad and today we are working on my 2007 Toyota
Tundra and my headlight has gone out so the bulb that's right here on this side
is out. So I've already been to Advanced Auto Parts and picked up a replacement
it is an H11 just a basic headlight and we are going to replace it today.
I'm going to go inside the cab and pop the hood to release it and then walk around to the
front of the truck. The latch to release the hood on a Toyota Tundra is at the
very bottom of the hood just to the right of center by the Toyota emblem.
It's fairly simple to determine where the bulb is I just look at the front and then match up
the spot with the location on the back and you see that it is right down here
in this area. To remove these bulbs you simply twist them counterclockwise
remove the whole fixture and then replace the bulb. It's simple to remove
the bulb you just twist it counterclockwise and you'll feel it
release and then you can lift up the whole assembly here. I'm going to use my
car keys to release the clip that's in here and the whole bulb comes out.
On the new bulb you want to refrain from touching this portion right here because the
oils from your hand can get on there and heat it up and cause it to burn out more
quickly. So to replace the bulb I have my new one here and it pops back into the
socket the same way I removed the other one and slide it back in the hole.
You want to get it back in the same orientation that you removed the other one which is
about two or three o'clock and then turn it down until it stops. It only goes down
to about five o'clock four thirty five o'clock down here and that's all there
is to it. Super simple to replace these bulbs just know to get the correct type
for replacement and don't touch this part of the bulb when you're working
with the new one. The last part of the process is to turn your lights on on the
vehicle. Come back up to the front and verify your headlights are working. You
see both of mine are illuminated so we are good to go.
I hope you guys found this video helpful. If you did give me a thumbs up and
subscribe to my channel. I post all kind of home repair videos, lawnmower repair
videos, vehicle repair videos to my channel. Anytime a problem arises at my
house I go ahead and post a video. You can click any of the videos on the
screen now to see some of the other ones that I've made. Hope you guys have a
great day!
