UPDATED VIDEO: https://youtu.be/12sBfird7v0 One of my bulbs stopped working again shortly after this video was recorded. I recorded a follow up video showing how to replace the switches that control the bulbs.
Don't forget to SUBSCRIBE and hit the notifications bell so you never miss a future video!
Interior auto lighting is essential so when a bulb blows, its a major inconvenience. In this video, I show you how to replace the reading light bulbs in a Honda Pilot but this same process applies to most Honda models. Here are some Amazon affiliate links to help you find the correct bulbs.
*My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions at no additional cost to you. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*
Welcome back guys it's the Tightwad and today we're in my wife's car. It's a 2011 Honda Pilot
and you'll notice that the door is open but both of these lights are no longer working. This one's
been out for a while but this one recently went out too so there's no way to turn on these reading
lights. So I'm going to show you today how to replace the bulbs inside these reading lights
and let's go ahead and get started. To remove these covers it's pretty simple you just push
in on the side where you would usually click to turn on and then pry down and I just use a butter
knife here and you'll feel the clips pop out and then you just wiggle them out here and then inside
here you'll see that there's a little bulb so I'm going to use the knife again to pop the bulb out.
It is held in by two brackets one on each end and then this is what the bulb looks like and you can
see this one's a little bit cloudy looking on this right side here and that lets me know that it's
most likely blown. Alright so here's the original bulb and against this concrete you can now see
that it's really gray in the middle smoky looking and then this is the new LED panel bulb from
Amazon. I will link these in the description so go there if you want to order some of your own
and I'll also put them in the pinned comments. Anything you buy using the Amazon affiliate
links on my channel will give me a small kickback but you still get the the exact same cheap prices
that you would get if you searched Amazon on your own. To replace the bulb you make sure that
the LEDs are facing down so the yellow tab should be facing down and we'll push it in on each end
and then we can replace this light switch here cover by I get it in on one side and then make
sure the other side's lined up and just firmly push it into place and we are done replacing our
bulbs. With our new bulbs in place I can simply push and test and you see they pop right on. These
are more of a daylight bulb than the traditional soft white so be sure when you're buying your LEDs
that you determine which color you want before purchasing them but we now have light in the
front of our car again. I hope you guys found this video helpful if you did give it a thumbs up and
subscribe to my channel. Put any questions you might have in the comment section below and I'll
get back to you as soon as possible. Don't forget about the affiliate links that are located inside
the description or in the pinned comment. I hope you guys have a great day.