EC205 ELECTRONIC CIRCUITS -POWER AMPLIFIERS CLASSIFICATION AND CHARACTERISTICS-Module 5
Oct 5, 2023
Hi All, Today we are discussing about Power Amplifiers.
What is Power Amplifier?
Power Amplifier is a large signal amplifier.
It is the output stage of any amplifier system.
Power Amplifier is used as the output stage of all amplifiers.
The amplifier stage preceding power amplifier is small signal amplifier.
This provides sufficient voltage level to the power amplifier.
Power Amplifier is a large signal amplifier which must be capable of handling a large number of amplifiers.
It is used as the output stage of all amplifiers.
Power Amplifier is used as the output stage of all amplifiers.
This provides sufficient voltage level to the power amplifier.
Power Amplifier is a large signal amplifier which must be capable of handling a large number of amplifiers.
It delivers appreciable power to the output devices such as loudspeaker, CRT, Servo meter etc.
Power Amplifier is a large signal amplifier.
It delivers appreciable power to the output devices such as loudspeaker, CRT, Servo meter etc.
According to the collector current waveform, we can classify power amplifiers into Class A, Class B, Class AB, Class C.
Class A power amplifier conducts for entire cycle of input signal.
Output signal is the faithful replica of input signal.
Class A power amplifier conducts for entire half cycle of input signal.
Output signal is the faithful replica of input signal.
Class A power amplifier conducts for entire half cycle of input signal.
Class B power amplifier conducts for entire half cycle of input signal.
Output current flows only in one half cycle of the input signal.
In Class B operation, the Q-point is located near the cut-off.
The output current flows only in one half cycle of the input signal.
Biasing
As there is no supply of current during non-conduction period,
here the efficiency is high.
Since output is absent during other cycle of the input signal,
there results a large harmonic distortion.
In Class B operation, the efficiency is high,
but there is a large harmonic distortion.
Class B power amplifier conducts for entire half cycle of the input signal.
Class A power amplifier conducts for entire half cycle of the input signal.
The current flows are less than that of Class A.
When Class B power amplifier conducts, the current flows are 180 degrees.
When Class A power amplifier conducts, the current flows are less than that of Class B.
the signal is between active and cut off
the signal will be more than 180
but less than 360
this is the signal we get
the points we have to remember in this
in case of class B
condition angle is 180 to 360
performance is
between class A and class B
performance is between class A and class B
distortion is
less than class B
but more than class A
distortion will be more
next is class C power amplifier
class C power amplifier
fix the Q point beyond cut off
this is class C power amplifier
fix the Q point below cut off
below cut off means
if you give some voltage
transistor will be ON
if you give some voltage
transistor will be ON
if you give some voltage
transistor will be ON
here is the current condition
here condition angle
is less than 180
look at this figure
look here
condition angle is less than 180
efficiency is more than class C
more distortion is class C
radio frequency amplification
this is class C configuration
now look at the performance
characteristics of this power amplifier
collector dissipation
a power amplifier is designed to transfer
maximum amount of power to the load
usually some portion of the input power
is transferred to the transistor
this parameter is significant in
selection of heatsink
otherwise the transistor may break down
collector dissipation
transistor break down
to find the collector power dissipation, find the total input power minus power dissipated
in the load.
The total input power minus power dissipated in the load is equal to the power dissipated
in the load.
The total input power minus power dissipated in the load is equal to the power dissipated
in the load.
So this is the equation for collector power dissipation.
This is the equation for collector power dissipation.
This is the equation for conversion efficiency of a power amplifier.

