EC 462 Mixed Signal Circuit Design- Course Overview
Oct 4, 2023
Hi all,
The elective subject of the 8th semester is Mixed Signal Circuit Design,
quiz code EC462.
In this subject, the prerequisite knowledge we need is
EC304 VLSI Design and EC308 Embedded Systems.
The necessary knowledge we need will be required in these two subjects.
But there is no problem.
We can learn this subject by studying all the subjects.
Even if we don't have the knowledge, we can learn it easily.
If we have the knowledge of these two subjects, VLSI and Embedded Systems,
it will be a little easier to learn the subject.
VLSI is the subject you all have studied.
I think everyone has the knowledge of it.
We have also studied Electronic Circuits.
Mixed Signal Circuit Design is a paper with all these subjects.
It is a comparatively easy paper.
We can learn only a few things in each module.
But it should be studied in a good way.
It is a comparatively easy paper.
We can learn only a few things in each module.
But it should be studied in a good way.
Let's see the course objectives.
Let's see the syllabus of this subject.
There are only a few things in the syllabus.
Most of the things we have heard are included in the syllabus.
We should mainly study CMOS amplifiers.
We know the common source amplifiers in CMOS amplifiers.
We know the common gate and common drain.
We should learn about the common CMOS amplifiers in these three stages.
Then its cascoded stages.
Folded Cascode Amplifier.
MOS Current Mirror Circuit.
We have heard about Current Mirror in other circuits.
We have heard about Current Mirror in VLSI.
MOSFET Cascode Current Mirror.
Differential Amplifiers.
MOS Telescopic Cascode Amplifiers.
CMOS Op-Amps.
Design of Classical Two Stage Op-Amp Amplifiers.
This is the classical design of an Op-Amp Amplifier.
These are the things we will learn in the CMOS Amplifiers.
We will also learn about Comparators.
Band Gap References.
PLL Phase Locked Loop.
Dynamic Analog Circuits.
Data Converters.
Switched Capacitor Circuits.
Data Converters.
Digital to Analog.
Analog to Digital Data Converters.
Specification.
ADC to DAC.
These are the things we have already learned.
It is simple.
There are very few portions in each module.
If you learn the portions,
you can understand this subject easily.
The expected outcome.
The outcome of the course is,
At the end of this course,
the student will be able to design and analysis
Various Analog and Digital CMOS Circuits.
This is the course outcome.
Now let's see the test book.
CMOS Analog Circuit Design.
Philip E. Allen and Douglas.
There is a test book called CMOS Analog Circuit Design.
Fundamentals of Electronics by Razavi.
These are the test books.
There are two references in the syllabus.
The reference is,
CMOS Circuit Design, Layout and Simulation by Bakker.
The reference is,
Design of Analog CMOS Integrated Circuits by Razavi.
For the last module,
you can refer to the second reference.
For the first module,
you can refer to Fundamentals of Electronics.
The question pattern of the subject,
is the same as the previous exam.
Part A, Part B, Part C,
Module 1 and 2 in Part A,
Module 3 and 4 in Part B,
Module 5 and 6 in Part C.
In each part,
there are two questions.
The questions will be covered uniformly.
In each part,
there will be three questions.
In each part,
there will be two full questions.
Mark Pattern asks,
60% will be good in theory.
40% is logical or numerical problems,
derivation and proof.
There is some derivation in this.
40% is for that.
60% is for theory.
So, this is the overview of
Mixed Signal Circuit Design.
Hope it is clear to everyone.
Let's start the next lecture.

