Oberfadenspannung einstellen wie der Schneidermeister - Schnellnäher
In diesem Video zeigen wir dir, wie ein Schneidermeister die Oberfadenspannung eines Schnellnähers einstellt.
Finde heraus, warum wir unser Wissen teilen:
https://www.schneiderakademie.com
Musik von Prinz Leo:
https://www.youtube.com/channel/UC-ErAkpuKOfbxCjKvjaX6Uw
#nähen #nähkurs #nähenlernen #schneiderkreide #profitipp
Now that we have adjusted the tension of the lower thread, let's take a quick look at the tension of the upper thread.
I take an oblique feed strip, which is cut at an angle of 45 degrees,
and sew the whole length over it with a slightly larger stitch,
and now pull the threads firmly apart.
And then the thread is torn. It is torn here and it is torn here.
This means that the tension of the upper thread is first torn,
which means that the tension of the upper thread is adjusted too firmly.
We assume that the tension of the lower thread is right.
Now I loosen the thread here, turn it twice,
then I know that if it is now the other way around, that the lower thread is torn,
then I am somewhere in the middle. Then I just have to try.
Now I do the same again.
It is torn a little on this side again.
Nothing is torn here.
Either they both tear at the same time, then that's okay,
or neither of them tears, then that's okay too.
Then I have adjusted the correct thread tension.
With each piece you make the world even more beautiful.
See you at the next profi tip.

