In diesem Video zeigen wir dir, wie du mit dem Zickzack-Stich deiner Haushaltsmaschine ordentlich versäuberst und die Maschine richtig einstellst.
Wir werden oft gefragt, warum wir unser Wissen kostenlos teilen. Als eine der ältesten Schneidereien der Welt haben wir Generationen von Wissen, Übung und Erfahrung gesammelt. Als preisgekrönter Lehrbetrieb werden seit 10 Generationen Lehrlinge und Meister bei uns ausgebildet und Designer weitergebildet.
Leider gibt es immer weniger Ausbildungsbetriebe, um das Schneiderhandwerk von der Pike auf zu erlernen. Und auch wir können in unserem Betrieb jährlich nur 1-2 neue Lehrlinge aufnehmen und ausbilden.
„Leider merken wir diesen Trend immer stärker. Es freut mich natürlich, dass sich so viele Menschen für dieses schöne Handwerk interessieren. Aber gleichzeitig tut es mir weh, jährlich duzende, qualifizierte Bewerber abzulehnen, die unser schönes Handwerk erlernen wollen.“ - Stefan Wimmer
Deswegen teilen wir unser qualifiziertes Wissen und Know-How mit praktischen Übungen und Anleitungen in der Schneider Akademie. Jeder und jede, die gerne Textile Kunstwerke erschaffen möchte, soll die Möglichkeit bekommen, von den besten und erfahrensten Schneidern zu lernen.
I'm going to show you how to properly clean with a household machine,
how to set the stitch correctly, how to adjust the fabric qualities
and how to properly adjust the tension here.
It's not very easy with a machine like this to get a really nice, professional clean.
But with a few tips, it gets pretty good.
The prerequisite is that you have already set the tension for a completely normal stitch length,
i.e. for the straight stitch.
I'll show you that in another video.
To build on that, now the new setting.
Here we have the adjustment of the width of the overstitch.
Here is a medium width.
The overstitch is how wide the needle zigzags here, i.e. left and right.
Here, with this setting, it overstitches further, i.e. it overstitches the whole field.
And here it gets very tight.
But that's different for every machine.
But the principle is the same everywhere.
We can adjust the width and we can also adjust the distance of the stitches here.
My tip is, we don't take the widest setting.
Because if the needle overstitches this wide here,
I can show that now,
then it simply pulls the fabric together.
Or rather, it pulls the fabric together.
I'll show you that.
Especially with thinner fabrics, we have the problem that the fabric is pulled together here.
And that doesn't look nice.
I have a cotton pupil here now.
It's thin, but it's hard.
And if we sew this on a lining fabric, for example, or on a side,
then it will be pulled together even more.
So I recommend a medium setting here, for example, or a little narrower.
The danger is, of course, if we take the overstitch very narrowly,
then the cleaning will not hold.
Then the fabric will tear or fray.
But now let's try it with this stitch.
Here, a little distance, so that the stitch length is longer.
And we leave the width at this medium setting.
And here it is already better.
Here, the fabric is not pulled together so much.
I have taken two different colors.
The top thread is purple and the bottom thread is red,
so that I can see how it behaves.
We see here, we still have a red dot from time to time,
so the bottom thread comes out.
We see that here.
And on this side, if we look closely,
the binding point is not exactly at the edge,
but always slightly inwards.
And if I iron it here, then it's really quite good.
I can use it to loosen the tension of the top thread a little.
I do this, for example, when I clean a feed fabric like this.
I'll show you.
Such a thin fabric, whether it is a feed fabric or a fine side,
is the most difficult.
With such thin fabrics, it is naturally pulled together, like here.
I can loosen the tension of the top thread a little.
And of course we don't have a nice tension here,
but a very flat fabric.
And now a professional tip from me.
I prefer the tension of the thread is too loose here
and it still fulfills its purpose,
because the seam is then ironed out like this.
And also the other side.
And then I feel that on the skin.
And I like that.
I feel something smooth on the skin,
than here, such a rough, thick surface.
So a rough, thick clean-up.
To the tension of the thread, in general, here at the zigzag,
I have two different colors, so that you can see it better.
Here I have the thread too loose.
I now have to slowly adjust myself
and adjust my tension here,
so that I have the right thread tension.
I'll try that again now.
Here it is already better.
Here I have the binding points.
So here very close in
and here very close to the edge.
Earlier that was much too loose.
The upper thread practically came down.
It was just looping.
So with this setting I am already very, very satisfied.
Because the binding point is easy to see here
and here it is at the edge.
And here I also like it better.
The binding point is at the bottom.
When the seam is ironed apart,
then I don't feel the binding points on the skin,
but they are practically underneath.
Because I always iron so that the right side,
i.e. the beautiful right side of the fabric, looks up.
And then I always have the right side in front of me
when I iron out the seams, for example.
When I iron two seams together,
it becomes easier.
The thicker the fabric is, the easier it is.
But we are now testing this with simple fabrics, with inlays.
And now I'll show you what it looks like
when it's set even tighter.
And here we have,
we see the binding points of the lower thread.
The red thread is the lower thread.
Here they all come up.
And through the tightening,
it pulls the fabric together again.
So when we go over it with our finger,
we have a very rough clean-up here.
And that is definitely to be avoided.
So I turn the whole thing back again,
so that I become more relaxed.
And here's another professional tip from me.
Remember the settings,
or test and try with two threads.
And then you suddenly notice,
aha, on one side or on a photo side,
I need the setting up here.
For me, for example, it's 2.8.
But that's different for every machine.
With a thin fabric, I take a photo,
also with the thin fabric.
With a medium fabric,
I try again with the two colors
in the upper thread and in the lower thread,
I photograph the fabric with the setting here.
And with a very thick one, the same again.
And every time I need something like this,
I just take a quick look at my cell phone,
which fabric, which setting.
Because I don't adjust the lower thread,
I leave it.
And here, one millimeter is often enough,
because we adjust the tension here.
So I'll summarize it again.
We don't take the widest cross stitch,
so not the widest zigzag stitch,
but a medium one.
How do I make a corner here?
I'll show you here.
I come here,
lift the foot,
so very simply,
here I stitch over it,
and then I iron it flat with the iron.
Then it's a very nice picture.
Another tip from me,
if you really sew a lot,
or if you plan to sew a lot,
then the next investment is an overlock machine.
They are already very cheap,
medium price range,
and of course, there are no limits to what you can do.
But I wouldn't take the cheapest one,
but a medium quality one,
and it will accompany you for a lifetime.
With an overlock,
your work looks even more professional, of course.
But for the start, a zigzag cleaning like this
works great, too.
I wish you a lot of fun cleaning.