Synthese von SAUERSTOFF aus Alltags-Chemikalien [𝟰𝗞] | JJChemistry

JJChemistry
4 Abonnenten
14 Videoaufrufe·03.10.2023
Werde Kanalmitglied und unterstütze dadurch meine kostspieligen Experimente - zusätzlich profitierst du von coolen Vorteilen☺️:
Kanalmitglied werden und exklusive Vorteile erhalten:
https://www.youtube.com/channel/UC1fXMFG158qpiCUgw4qSX8Q/join
Heute stelle ich Sauerstoff aus Wasserstoffperoxid und Kaliumiodid her.
Wasserstoffperoxid ist bis zu einer Konzentration von 12 % frei erhältlich und die Reaktion sollte auch mit Braunstein oder Hefe als Katalysator funktionieren.
Today I present the element that we all need to live.
Oxygen.
Oxygen is a gas and contains 20% of our respiratory air.
It is produced by plants during photosynthesis and thus reaches the environment.
Good for us.
Oxygen can be chemically produced by various processes.
I use the following two chemicals for this.
Hydrogen peroxide and potassium iodide.
These two substances also form the core of the so-called elephant toothpaste,
which I made a video about at the end of last year.
Elephant toothpaste also produces oxygen.
Here oxygen is absorbed by food, creating a thick foam ball.
When the bubbles burst, and sooner or later they will, I swear,
the oxygen is lost for further specific applications.
In today's experiment, it is important to me that the oxygen is absorbed in a controlled manner
to use it for a few foam experiments with fire.
Therefore, a suitable laboratory apparatus must be made.
The apparatus consists mainly of a piston, a funnel,
a bit of a hose and a valve with a balloon hanging on it.
The dropper contains 30 ml of hydrogen peroxide with a concentration of 35%.
According to my calculations, several liters of oxygen should be produced from it.
The piston is filled with potassium iodide and some water.
Potassium iodide serves as a catalyst in the reaction to split hydrogen peroxide.
When in contact with potassium iodide, hydrogen peroxide dissolves into water and oxygen.
The oxygen exhausts and takes the only way out of this closed apparatus,
namely in the middle of the balloon.
At least it should work like that if the apparatus has no leak.
This is already the second attempt, because the first one did not go quite so perfectly.
In the first attempt, it turned out that gas had to be lost somewhere.
To check where the oxygen is leaking, the whole apparatus was put in a water bath
and flowed through with air.
It is obvious, there is definitely a leak.
Whatever the case, it worked well as expected.
And here it is, a proud balloon with almost 20 cm in diameter.
You can work with that.
The combustion of organic materials, such as wood,
only works because oxygen is contained in the air as a potent oxidizing agent.
If you replace the complete air with pure oxygen,
combustion becomes much more intense.
For example, with sulfur.
I fill an Erlenmeyer piston with the oxygen I just made myself.
Oxygen is lighter than air and will gradually flow out of the opening of the Erlenmeyer piston.
At the air flame, it is barely visible blue flame.
In oxygen, however, the reaction is very impressive.
A very nice experiment is the combustion of a hose.
The typical transparent hoses from the hardware store are made of PVC,
which in itself is already difficult to deflame.
Difficult to deflame also means that when removing the lighter,
it tends not to burn further on its own.
Here you can see the full potential of oxygen.
Exhaustion is no longer possible.
When the hose is filled with oxygen,
the combustion looks like a small nozzle drive.
Okay, next experiment.
This time a PVC hose replaced by something that already burns very well even without oxygen,
so without external oxygen supply.
Our polypropylene.
It already burns quite well.
Now with oxygen.
Yes, I would say that was impressive.
I just came up with an exciting experiment with oxygen and white phosphor.
Because white phosphor is incredibly oxophobic,
that means it has an incredibly great tendency to react with oxygen.
And what it does or what happens, we'll take a look at it now.
First of all, it is stored in the closet.
There it is.
Looks like a carrot.
But it's much more dangerous.
There is probably a small piece in here from the last experiment.
And we'll use that today.
There it is.
The white phosphor is already starting to smoke.
White vapors are formed.
You can't see it right now.
But that's usually what happens.
Just because it is so extremely reactive in combination with oxygen.
I'm not going to light it up now,
but just gas it with oxygen and see if that does anything.
No, nothing actually happens.
Then we'll light it up again briefly.
Okay, you didn't see it that well.
But it does something with the white phosphor.
Now you may have recognized it.
It reacts so extremely, even with oxygen, that glass breaks apart.
It's good that the trigger is there and pulls everything out reliably.
And we ran out of oxygen.
We have to produce new oxygen for the next experiment.
Exciting to see or what you can determine.
Only white phosphor, which does not burn in combination with oxygen.
Apparently not much happens there.
We now have to produce new oxygen for the next experiment.
Many thanks to my channel members.
Without them, such long projects would be impossible.
The time required for long videos is really immense for me.
If you want to see more videos like chemicals and laboratory-required unboxings
and behind-the-scenes, feel free to look around the member area.
