Be sure to hit the SUBSCRIBE button and then click the bell so you don't miss any future videos.
Garage doors can get quite noisy without regular lubrication. In this video I demonstrate the proper way to lubricate your garage door and I also discuss the types of lubricant you should and should not use.
You can use the Amazon Affiliate* Links below to buy supplies for your repairs:
*My description and comments may include referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*
Welcome back guys, it's the Tightwad and today I'm working in my garage.
My garage door has gotten louder and louder over time with creaks and squeaks and all
kind of noises whenever it raises and lowers.
So it's in need of some maintenance and some lubrication.
So I want to make sure that you understand which product is appropriate and where to
apply it to quiet that garage door down a little bit.
First we're going to talk about WD-40.
You'll notice if you ever read a WD-40 bottle, it doesn't even mention lubricant on it.
It is made to drive out moisture or loosen rusted parts.
It is not made to be a long term lubricant.
It also attracts dirt and dust, so this is not a correct application for using WD-40.
So we're going to go ahead and put this to the side.
Instead of a product like WD-40, we're looking for a lubricant that is either lithium based
or silicone based.
And this Blaster product is a premium silicone based product made specifically for garage
door lubrication.
Since this can is made specifically for garage doors, it even indicates on the back that
it is good for rollers, hinges, springs, and door tracks.
It says it's also good for cables, bushings, bearings, window tracks, and chains.
And this is an ideal type of lubricant for your garage door.
Just to be clear, this Blaster product is not the only one that will work for garage
door.
I'm going to include some links in the description to some of the other products that I would
recommend for this same type of application.
Using these Amazon links will not cost you any more money, but it does help out funding
my channel.
So now I'm going to show you where to apply it.
On your garage door, there are several of these hinges all around, and they do need
to be lubricated on the inside and outside of all of these parts.
So I'll go around and do this on the entire garage door.
And it makes somewhat of a mess, but I'm not really worried about it because we are in
the garage.
It's not inside our house.
The next place we need to lubricate are the rollers.
These rollers turn inside this metal sleeve right here, which could cause friction.
So I'm going to make sure I squirt some inside of there from both ends.
I'm also going to squirt the roller itself.
If your rollers have bearings inside of them, which mine don't, but if your rollers have
bearings inside, it's a good idea to make sure you get inside there and cover all of
the ball bearings.
So now I'm going to go around and I'm going to squirt all of these rollers.
One thing you'll notice on these rollers is that they typically have a seam that goes
the length of the roller shaft.
So you can squirt straight into that seam so you don't have to squirt completely in
from the outside.
And there's another seam on this one.
So just make sure that you're squirting it into those seams to get it into the center
of the roller.
The next thing we need to lubricate is the spring.
And I'm actually going to spray down the top of my spring because I know that it will drip
down and cover the rest of the spring.
And we'll do this on both sides.
Most garage doors have a center track like this with cables or chains inside of them.
And while it's not always necessary to lubricate, it's not going to hurt anything by doing so.
And one other optional place to lubricate are the tracks themselves.
And with the tracks, I'm just going to squirt along the top side of the track because I
know it's going to run down and get in the bottom side as well.
There are cable rollers on the ends of the spring rod that need to be greased as well.
The cable itself does not need to be greased, but the area around it here does.
And once you've added your lubrication to all the areas, it is good practice to go ahead
and raise and lower your garage door several times.
Make sure that your vehicle is not parked in the garage when you do this because you
don't want any of the residual silicone lubricant dripping on the finish of your vehicle.
And you should notice that it gets quieter with each raise and lower.
Now you'll hear that my garage door doesn't have the creaks and groans anymore.
I hope you found this video helpful.
If you did, give me a thumbs up and subscribe to my channel.
Once you subscribe, ring the bell so that you get notifications when I post new videos.
If you want to see any of the other videos showing issues with your garage door, click
them on the screen now and they should open on your device.
I hope you guys have a great day.