Bei diesem Video wird ein lang gehegter Traum von mir wahr: Schmieden! Und dann auch noch in historischer Umgebung. Und dann auch noch eine Speerspitze. Und dann auch noch mit Einar dem Schmied, alias Stephan Lück. Seine Webseite findet ihr übrigens hier: http://www.einars-schmiede.de/Startseite/
Die Musik im Clip ist aus der YouTube Audio Bibliothek entnommen.
Meine Kamera: Panasonic Lumix DMC-FZ300 Die Audiospur nehme ich auf und bearbeite ich mit Audacity 2.1.
Vielen Dank diesmal an meine ganze Familie für die Unterstützung.
Hello and welcome to a new vegan video.
This time no gag as usual sometimes at the beginning, but just an intro,
because I had to build up the video a little differently than you may otherwise be used to.
Because this time I'm not in my garden, but somewhere else.
Because a few weeks ago I finally realized a little dream of mine and visited a blacksmith course.
And my goal was something like this here.
This is now a spearhead that you can simply buy on the internet.
How it is made, no idea.
And I just wanted to get to it myself and see how it works.
What do you need for it?
Well, in earlier times, of course, you would have to make iron first,
or get it out of the ground in a racing oven.
You have to win this iron relatively extensively.
Today you can go to a hardware store and, for example, buy such a simple masonry iron.
And in this iron there is already a very small amount of carbon.
It is called construction steel.
And the amount of carbon is so low that it is reasonably comparable to the iron
that you could actually have won from a racing oven.
Also in terms of the ratio of iron to carbon.
So that's about 0.3 percent, so very little.
And with that it is so soft that you can also bend it and, above all, can be processed relatively easily.
Of course, you could also use old, broken tools.
Here I still have a hammer head, something like that, or an axe that has not been sharpening for a long time.
But that would be tool steel.
It is much harder, it also has a higher carbon content.
And here the forging is accordingly more difficult.
So I need more energy and I also have to know a lot more about how to process it.
And where do I get the energy for it?
You can easily get that in the market.
Wood coal, for example.
A product that has been used in the same way for centuries.
So that means that in the past, of course, coal miners somewhere in the forest
also made the wood for the wood coal relatively elaborately.
That means it is processed in such a way that a lot of water evaporates.
And with that, the energy output in the wood coal is much better
than if you just try to make a fire with wood.
And you even need an additional air supply to get the temperature up accordingly,
to get the iron really soft.
That means we don't just have to light the wood coal,
but also supply it with oxygen all the time.
So that's the minimum that such a small forging mill has to provide.
So enough space, enough wood coal and, above all, some kind of ventilation.
And then you can get started.
Of course, under the guidance of an experienced smith, if possible.
I was very lucky to get such a course with Stefan Lück at the Glauberg at the Celtic Museum.
And what came out of it, you can see here now.
Have fun!
So, it's the end of March, with growing weather, quite a lot of wind, a little cool,
but still reasonably pleasant.
And we are here at the Glauberg at the Celtic Museum.
This is near Büdingen in the Hessian Wetterau.
Or if you don't know much about it here in Hesse,
about 40 kilometers northeast of Frankfurt am Main.
And of course the small forging mill is not in the museum, but right behind it.
So we have to go around the building once.
And there we meet Stefan Lück, also known as one of the smiths.
He brings the experience of more than 15 years of smithing.
He also does, as you can see here, reenactment.
And he organized the course here.
And of course he also made his tools available, his whole field smithy.
And he will show us beginners the basics of smithing.
Here on the grinding stone you can see a pattern of a spacer tip,
how we want to make it later.
Whether I can do that so well, of course, I don't know exactly yet.
And I swing over to Esse, or there are three pieces,
because we are also three participants.
And what you can also see here is of course an anvil.
And on it are the raw steel pieces so far.
I already explained it in the intro, this is construction steel.
And what is steel at all?
Simplified, forgeable iron or forged iron.
And as I said, construction steel is one of the places with a very low carbon content,
which is very soft and still relatively close to raw iron.
It definitely has to go away when I look at the answer, but still ...
Yes, no problem.
Well, about 3,000 years ago, the most popular and most important metal here would have been bronze.
And then people just found out that iron is also forgeable,
if you can only make it hot enough.
And the Essen here, with the charcoal, have to be ventilated with sufficient oxygen
in order to get the temperature we need to forge.
Because only then do we have enough energy to achieve at least 800 to 1,000 degrees.
Then we have red-glowing iron and that is soft enough to process it.
Do you want to solve the question?
Would you like to have it?
Glowing for the first time takes the longest, because the iron is still cold.
Oh, that's good.
That's good, that's good.
The important thing is that when we put the iron in, it is best to start with the air pull first,
because otherwise the coal will slide away and there will always be a piece of metal at the bottom,
which is closed with the pliers and it is important not to go into the fire with the hammer.
We still need a little, but it's really about to glow.
By the way, you have the warmest workplace here, just because it's warm on both sides.
Yes, it's not pleasant right now.
Exactly, but then you can always change, of course.
So far no one has ever frozen in the forge.
And by the way, the Celtic Museum is exactly the right place for this,
because the Celts were one of the first really well-known peoples
that mastered this iron processing and was able to produce really great products with it relatively early on.
After a good quarter of an hour, the iron was already really glued through,
so that it was now ready to be processed on the anvil.
And of course you need a special pair of pliers and a simple hammer,
not too big, but not too small either, so that you can work reasonably with it.
Stefan first demonstrated with experienced and practiced strokes how the whole thing has to be processed.
Of course, he also explained at the same time how to start.
And next we were allowed to do it ourselves.
That didn't look quite as practiced, logically.
But you can see that for yourself now.
If you want to forge now, then quickly to the anvil and then start right away.
So, I just want to show you something here.
Like this, right?
Yes.
Very important.
Your back wouldn't like that.
Okay.
So, we can of course stand straight.
I always use the anvil as a line.
90 degrees to the workpiece.
Again 90 degrees the hammer.
Yes.
Then you can really cut out nicely.
Because through the way the hammer goes back, the force comes first.
Yes.
If you do it like this, not much happens.
Yes.
So really, hammer fine.
And also adjusting.
That's why we have the syringes.
It's just better.
And we also work with the whole arm, not just with the wrist, because that also hurts.
Yes.
So.
Do you see what I mean?
It's just not a master from heaven yet.
Unexperienced as I am, I'm already hitting too cold iron.
So if it's dark red or even turns gray, you can hit it as you like.
Nothing forms anymore.
That's why the iron has to go into the ash again and again.
By the way, if you're wondering what kind of weird funnel-shaped shape that is,
that's the back part, which then becomes the funnel.
That's not the tip.
It's already cold again.
Yes.
It goes back and forth.
That's why we had to wait a little longer.
When the iron glows so orange-red, it can really be shaped like a tough dough.
And then I let it cool down and smoothed it out a little cold at the end.
And now it's flat and thin enough that you can actually shape this tulle.
Yes, I decorate myself a little with foreign feathers.
All right.
That's fine.
What do you think?
Yes, it looks good.
Okay, and now warm it up again.
Yes, warm it up again, exactly.
And then really in the middle, on top.
So basically you don't need to go down there anymore.
Because you've chosen the direction.
But rather like this.
Now turn it around, work on the other side.
That looks good.
Now we have to slowly, now you see, the lid is closing.
Slowly, while hitting here, turn it slowly so that we can get around here.
And the same on this side.
Let's get a little help here.
In principle, we could do it directly.
So come here nicely.
As you can see, Stefan is taking over the last step of the work for the tulle here.
And now it can go to the top.
Now the front part comes on.
And of course the workpiece has to go back into the chisel.
So you need a lot of charcoal here.
Several kilos.
How much exactly, I don't know anymore.
But it was almost the whole sack when we used it.
And since I've been working on the whole thing for a relatively long time,
this iron has been in contact with the charcoal for hours.
And that means that some of the carbon has been transferred to the iron.
It is said that the iron coals up.
That means that the carbon content is now higher than it was in the construction steel before.
And that in turn means that the steel also becomes harder afterwards.
Or it can be hardened at all.
Don't do it too slanted.
And you have to ...
Look, now you have to turn it around, right?
That's why I'm turning it around a bit.
You can also try to see if it is in between.
Just try it out.
Now be honest.
I didn't put myself in such an awkward position, did I?
In any case, I think my piece of iron looked more and more like a spearhead.
And that was really more and more fun.
Well, I probably took three or four times as long.
So an experienced blacksmith would probably finish such a spearhead in less than an hour.
Or even a little shorter.
But you can't really expect that from a beginner.
So all three of us had a pretty good cut.
And on top of that, all three of us had a really recognizable spearhead at the end.
But as I said, over time.
And that's a good cut.
So now we have to make sure that we hit enough here.
No, no, it's good here.
I'm on the side.
We're still going to the cut.
That means we need a little body in the middle of the spearhead so that it doesn't wobble too much.
It should also have stability.
What do you mean?
In principle, you could put it next to it.
We can do that right away when we forge the cut.
We'll be back here.
Coal on it.
That's why the smith's hammer is always round.
If you put it somewhere next to it, you don't have a sharp edge.
You have a soft edge, which is easier to forge out.
A sharp edge.
Especially if you have to work on corners like this.
You have to be very straight.
You also have to be 100% exact.
Exactly.
You can hardly get that right.
It's going to be difficult.
Last but not least, we have now forged the cutting edges thinner.
Because everything you forge, you don't have to grind away afterwards.
You've just saved yourself a little work.
Or rather, the work is a little easier.
Yes.
If it stays so leaf-shaped, that's not bad either.
Yes, yes, that's how it stays.
But I mean this transition here.
I'd like to do that a little bit more.
Sure.
Here, too, in the last steps, I was happy to be helped by Stefan.
Because, of course, you also learn from watching.
I am, of course, incredibly fascinated by the ease with which a skilled blacksmith gets the shape he wants from this iron.
In general, blacksmithing has always had something magical for the audience.
How you get the iron out of the earth, with fire and water, and then make tools, weapons and art objects.
I think that's still fascinating to this day.
In any case, I was really amazed by it.
I was very happy that I was allowed to do this myself.
The more you forge, the less you have to grind later.
Yes, that's right.
Turn it again, please.
Yes, great.
After the shape was successful, the last step was to harden it.
Traditionally, by shaking it off in cold water.
Here, the steel simply gets a different structure.
That means the molecules sit together in a different crystalline state.
This makes the surface much harder than it was before.
Now you have it in your hand first.
Wow, and it's straight too.
Well, a little bit.
That's why it's called straight.
That's good.
It sounds completely different, doesn't it?
Hehe.
This brown metallic glass.
You can see how fast the rust goes away.
It's brown.
You have to wipe it dry right away.
Crazy.
When it's really dry, you have to go over it again.
Now you can see.
Sounds completely different, doesn't it?
So, that's it now.
So far, with the whole forge.
And yes, you can still see all the processing traces.
So what has to follow now is grinding and polishing.
I do feel that this is a really useful spear tip.
Of course, you also need a real shaft.
And we want to fix it properly, so that a real spear comes out of it.
And that will be seen in the next video.
Remember, if you haven't already done it anyway, don't forget to subscribe.
Maybe press the bell so that you are notified.
And of course you can always write to me in the comments.
Or via Facebook or via Instagram.
Or just by mail.
You know, I get in touch every time.
And I'm happy about every single comment.
So then, maybe you'll be back in the video.
Where I make the whole thing into a real spear.
Until then, thank you for watching.
And take care, bye.
Now honestly, I didn't put on that bad of a show, did I?