VOLTAGE DIVIDER BIAS || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, we were discussing about biasing. In the last class, we learned about different types of biasing,
like fixed bias, collected to base bias, or collected to base bias, or self bias.
Today, we are discussing about voltage divider bias.
Today, we will see what voltage divider biasing is.
Voltage divider bias is commonly used in all circuits.
Voltage divider biasing is commonly used in all amplifier circuits.
Voltage divider biasing provides the best stability to the circuit.
So, we are using voltage divider bias in all common emitter amplifiers.
Commonly, we are using voltage divider bias in many of amplifier systems.
Voltage divider biasing is commonly used in all amplifier systems.
Voltage divider bias is the main reason for this circuit.
We are biasing this transistor.
We are biasing this transistor by taking a portion of this Vcc power supply.
How do we take a portion?
We divide this Vcc voltage.
To divide this, we are using a voltage divider network R1 and R2.
A fraction of this Vcc is biased to this transistor Q.
So, this circuit is called voltage divider bias.
Here, the base bias is provided by voltage divider network which is formed by R1 and R2.
R1 and R2 are the voltage dividers.
It is difficult to analyze using this circuit.
So, we have to draw its Thevenin equivalent circuit diagram.
So, this is its Thevenin equivalent diagram.
You have learned how to draw Thevenin equivalent in S3.
This is the Thevenin equivalent diagram.
Let us see how to draw the Thevenin equivalent diagram.
We have drawn the transistor Q and Rc in the same way.
We have marked Vcc at the top of Rc.
Now, let us see what is the voltage at the base of the transistor R1 and R2.
The voltage at the base of the transistor R1 and R2 can be written as Vbb.
The equivalent of R1 and R2 can be written as Rb.
The voltage at the base of the transistor R1 and R2 can be written as Vbb.
The effective of R1 and R2 can be written as Rb.
So, this is how we draw the Thevenin equivalent diagram.
This is the Thevenin equivalent diagram for voltage divider bias.
When we draw the Thevenin equivalent diagram for voltage divider bias,
the potential at the base of the transistor R1 and R2 can be written as Vbb.
The potential at the base of the transistor R1 and R2 can be written as Vcc.
We have learnt the voltage dividing rule.
We can find the voltage here as main voltage into resistance in that branch divided by total resistance.
We can apply the voltage dividing rule here as well.
Main voltage is Vcc.
Vcc into resistance in that branch.
Resistance in that branch is R2.
So, R2 divided by total resistance.
Total resistance is R1 plus R2.
So, what do we get?
We get Vbb.
As I said earlier, Rb is the parallel combination of R1 and R2.
R1 parallel R2.
The parallel combination of two resistances is R1 R2 divided by R1 plus R2.
Rb is the parallel combination of two resistances R1 and R2.
The effect of that parallel combination is R1 parallel R2 which is equal to R1 R2 divided by R1 plus R2.
Now, from the Thevenin equivalent circuit diagram, we can write its loop equation.
Where can we go?
We can write loop equations.
What are the loop equations?
We take input loop as well as output loop.
We can consider the input loop.
What are we going to write?
We are going to write loop equations.
We can write the loop equations are.
Loop equations are.
Equations.
Equations are.
How can we write loop equations?
We consider the input loop.
When we consider the input loop, what is the total voltage given in the input?
It is VBB voltage.
The total voltage given is VBB.
VBB is the voltage that is applied in the input loop.
Where does this VBB voltage applied in the input go?
It is lost here.
It is lost as Rb cross.
It is lost in the base emitter of the transistor.
It is lost in the resistor called Re.
We can write the input loop equation like this.
If we take the input loop equation,
look at the input side of the transistor.
The total voltage applied in the input side is VBB.
The total voltage lost here is Rb.
It is lost as the base emitter of the transistor.
It is lost as the resistor called Re.
We can write the input loop equation like this.
VBB is equal to the voltage that goes across Rb.
The current that comes to the base is called Ib.
The current that flows through the collector is called Ic.
The current that flows through the emitter is called Ic and Ib.
We can call it as Ic plus Ib.
We can write the voltage drop in the resistor called Rb as Ibrb.
The voltage drop in the resistor called Rb is called Ibrb.
The base emitter voltage drop in the transistor is called Vbe.
Since we have to operate the transistor as an amplifier,
we have to operate it in the active region.
So, we can write Vbe as active.
The next voltage drop occurs in the resistor called Re.
The total current that flows through Re is called Ib.
The total current that flows through Re is called Ib plus Ic.
Current into resistance.
Resistance is called Re.
We can write the input loop equation like this.
Input loop equation Vbe is equal to Ibrb plus Vbe active plus Ib plus Ic into Re.
We can write the output loop equation like this.
This is the output side.
The output side is given as the Vcc voltage.
We can write the total voltage as Vcc.
The total voltage at the output is Vcc.
It drops across the Rc.
the collector emitter of the transistor and the resistor called RE.
For VCC, the total voltage across RC is Ic into RC.
For the collector emitter, it is VCE active.
For the collector emitter, it is Ib plus Ic into RE.
For the collector emitter, it is Ic into RE.
From equation 1, we neglect VBE active.
We can neglect VBE active because VBE active is a very small voltage.
We can find the equation of Ib using the remaining equations.
We can write VBE is equal to VBE is equal to IbRb plus Ib plus Ic into RE.
We can combine the terms of Ib.
We can write IbRb plus IbRE is equal to VBE minus IcRE.
We can write Ib is equal to Ib into Rb plus Re which is equal to VBB minus IcRE.
We can find the equation of Ib.
Ib is equal to VBB minus IcRE divided by Rb plus Re.
We have found the equation of Ib.
Now, we know the equation of Ic.
Ic is equal to the basic equation of collector current.
Ic is equal to beta times Ib plus beta plus 1 into beta plus 1 into Ic0.
Ic0 is the reverse leakage current.
This is the basic equation.
We substitute the value of Ib into this basic equation.
We substitute this to find the stability factor.
Stability factor is Ac is equal to dou Ic divided by dou Ic0.
The procedure is same as we did earlier.
We substitute the value of Ib into this equation.
Ic is equal to beta times Ib into VBB minus IcRE divided by Rb plus Re plus beta plus 1 into Ic0.
We cannot do the analysis just like that.
We have to find the stability factor.
Ac is equal to dou Ic divided by dou Ic0.
The term of Ic is here and here.
We have to substitute this in terms of Ic.
The term of Ic is here and here.
We have to substitute this in terms of Ic.
For that, we can rewrite this.
Ic is equal to beta VBB divided by Rb plus Re minus beta IcRE divided by Rb plus Re plus beta plus 1 into Ic0.
We have to combine the terms of Ic.
We can take Ic as common here.
We can write 1 as corresponding to Ic.
We have to take the terms of Ic to the left side.
Minus will be plus.
Plus beta RE divided by Rb plus Re which is equal to beta VBB divided by Rb plus Re plus beta plus 1 into Ic0.
Now, we can write the equation of Ic.
The equation of Ic is Ic is equal to beta VBB divided by Rb plus Re plus beta plus 1 into Ic0 whole divided by.
Whole divided by this term.
We can split the whole divided by this term.
This is divided by this.
This is how I write it.
Divided by 1 plus beta Re by Rb plus Re.
Divided by 1 plus beta Re by Rb plus.
Now, what do we have to find?
We have to find the stability factor.
We said that the voltage divider bias is more stable.
So, we have to find that stability factor.
The equation of stability factor is S.
S is equal to dou Ic divided by dou Ic0.
This is the stability factor equation.
Here we can find out the stability factor.
When we do dou Ic divided by dou Ic naught,
look at this,
is there any value of Ic in the first term?
Is there any value of Ic naught in the first term?
No.
Then this one term,
with respect to dou Ic naught,
this first term is constant,
and the derivative of constant is 0.
Look at the second term,
beta plus 1 into Ic naught divided by 1 plus beta Re divided by Rb plus Re.
This term is a constant into Ic naught.
Constant into dou by dou x of kx.
A constant into,
when we take the derivative,
the derivative is the constant.
So, when we take dou Ic divided by dou Ic naught,
we will get the value is beta plus 1 divided by 1 plus beta Re by Rb plus Re.
So, this is the stability,
sorry,
so this is the equation for,
equation for stability of,
this is the equation for stability of a voltage divider bias.
This is the equation corresponding to the stability of a voltage divider bias.
So, now let us see what are the advantages of voltage divider bias.
We can see from this equation,
we can see from this equation,
the stability factor is improved.
The value of stability factor,
the value of S is,
good stability factor,
the value of S is when a very small value comes.
If you look here,
you will understand,
the value of S is,
when we studied fixed bias,
it was beta plus 1, right?
When we compare it with that,
we can say that the stability factor is improved in a good way.
So, first advantage is,
stability factor is improved with a voltage divider bias.
Now, let us look at the next advantage.
Here, it is thermally stable.
What is it?
When we use this voltage divider bias,
we can achieve thermal stability to the circuit.
How does it achieve thermal stability?
Any increase in temperature will increase the collector current of the transistor.
In any way,
if the temperature increases,
the collector current of a transistor will increase.
Here, what is it?
I b.
I b reduces due to excess voltage drop across R e.
This in turn reduces I c,
and collector current is stabilized.
Hence, R e provides thermal stabilization or prevents thermal runaway.
I will tell you how it is.
Look at it.
Please pay attention.
Based on this equation,
we have to set the temperature as 3.
Based on this equation,
when temperature increases,
what naturally increases?
Collector current increases.
When collector current increases,
base current decreases.
When base current decreases,
transistor's base current,
transistor is a current controlled device,
when transistor's base current decreases,
the amount of conduction of transistor naturally decreases.
In other words,
it reduces the amount of collector current.
In this way,
it acquires thermal stability.
There is a term called thermal runaway.
Thermal runaway means,
when temperature increases,
as a part of increasing temperature,
more current will pass through the transistor.
In this way,
more current will pass through the collector,
and the transistor will be damaged.
This is called thermal runaway.
From thermal runaway,
we can acquire temperature stability.
Using a resistor called RE,
we can stabilize the circuit thermally.
In this way,
when temperature increases,
more collector current will pass through the transistor.
When more collector current passes,
more current will pass through the resistor RE.
The voltage across RE will increase.
When voltage across RE will increase,
the voltage of the emitter will increase, right?
So,
the base emitter voltage of a transistor
will be the voltage in the base
minus the voltage in the emitter.
To increase this voltage in the emitter,
what will happen to the transistor?
Will the base emitter voltage decrease?
If the base emitter voltage decreases, the base current of the transistor decreases.
As the base current decreases, the transistor starts to control the collector current.
The transistor passes only a small amount of collector current.
Thus, we can say that the transistor acquires thermal stability.
These are the advantages of voltage divider bias.
I hope everyone understood today's class.
The main disadvantage of this circuit is that we are using two resistors.
We are using two resistors called R1 and R2.
If we use biasing using two power supplies, we can replace these two resistors.
That is the disadvantage of this circuit.
It can be overcome by biasing using two power supplies.
That's all about voltage divider bias.
I hope everyone understood voltage divider bias.
See you in the next class.

