RC LPF TO PULSE INPUT || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, in this session we are discussing how a RC low pass filter will respond to pulse
input.
In the last class, we learned how a high pass filter will respond to a pulse input.
Today we are discussing how a low pass filter will behave when a pulse input is given.
The circuit diagram of a low pass filter consists of a resistor, a resistor and a capacitor.
This is the circuit diagram of a low pass filter.
We have a resistor and a capacitor, we are providing Vi here and current through the circuit
is I.
This is the circuit diagram of a low pass filter.
Now we are giving a pulse input to this.
In the last class, we discussed what a pulse input is.
A pulse input is what we develop from two unit step signals.
A pulse input is a signal like this.
The value of the pulse input is the input voltage.
The amplitude value can be taken as V.
The pulse width can be taken as Tp.
The value here can be taken as Tp.
We have defined the pulse signal.
We have designed the V input.
V input is equal to V4, 0 less than T less than Tp and 0 otherwise.
This is our pulse input.
We are looking at how this pulse input behaves when we give it to the RC low pass circuit.
The speciality of this is,
the pulse signal acts between 0 and Tp.
Here we can put 0.
The pulse signal acts like a unit step signal between 0 and Tp.
When we input a unit step signal to a low pass filter,
we know its response.
At this time, between 0 and Tp,
the RC low pass filter behaves like a unit step signal.
We have seen how a unit step signal behaves when we give it to a RC circuit.
We are giving a high voltage.
We know what a unit step signal is.
A unit step signal is a value between 0 and Tp.
When we give a signal like this,
we are applying a high voltage to the input.
When we apply a high voltage,
the capacitor starts charging.
The output voltage is taken across the capacitor.
The output voltage is how the capacitor charges.
The output voltage we got when we gave a unit step signal is like this.
We got an output voltage corresponding to the capacitor charge.
Here also, it behaves like a unit step signal between 0 and Tp.
In this time interval, the capacitor charges exponentially like a unit step signal.
The output waveform is also an exponential waveform.
I am drawing the output waveform here.
We can show the output waveform like this.
This is our input.
This is the input called Tp.
This is the pulse input with a pulse width of Tp.
This is our input voltage.
When we give an input signal,
it behaves like a step signal between 0 and Tp.
How do we get this?
It should be an exponentially growing curve.
When we give a step signal to this RC low pass circuit as an input,
when we apply a high voltage, the capacitor charges.
The capacitor charges exponentially.
We get an exponentially growing curve in the output.
In this time interval,
we can see that the output is growing exponentially.
In this time interval between 0 and Tp,
we get the corresponding step signal.
In this time interval between 0 and Tp,
we can see that the output is growing exponentially.
The voltage at this point is called Vp.
The voltage at the time interval between 0 and Tp is called Vp.
The response to pulse for time less than the pulse width.
is same as that for step input.
Because pulse signal is same as step input for T less than Tp.
However, at the end of the pulse,
the pulse will go to 0 after Tp.
The input will become 0 after Tp.
Then what should the output do?
What should the value charged by the capacitor do?
divided by R C. Now, at T is equal to T p, the voltage is V p. So, V p is equal to T
p divided by R C. Now, at T is equal to T p, the voltage is V p. So, V p is equal to T
p divided by R C. Now, at T is equal to T p, the voltage is V p or V out is V p is equal
to V into 1 minus E raise to minus T p divided by R C.
Here also the same thing is happening, when the pulse goes to zero, when the input goes
to zero, what is the capacitor doing?
Capacitor is discharging.
Then our output voltage will also come down correspondingly.
Then here also we can write in the same way, the equation of the output voltage, the same
equation that we learned then, what is Vout is equal to, what is it, V e raised to minus
T by RC.
In the case of discharging, what is the equation that we learned?
Vout is equal to V e raised to minus T by RC.
In the same way, we can write here V e raised to minus.
The value of T here, T is from here to here, that is, it is a value greater than Tp.
Then the value of T here, we can write in this way, that is, it is discharging and
reaching here.
This total time interval from here to here, if the time interval from zero to here is
T, then this time interval, that is, from Tp to here, this much, this much time interval
from here to here, to find the time interval from here to here, what should we do?
T minus Tp.
That is, if the total time interval is T, then from here to here, this much is called
Tp.
That is, from this total, from this total, from this total, if this Tp time interval
is reduced, we can get the time interval from here to zero, from Tp to zero.
Then we can substitute that value here.
V e raised to minus T minus Tp divided by, divided by T minus Tp divided by Rc.
So, this is the output voltage equation when T greater than Tp.

